1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun5i-a13.dtsi"
45#include "sun5i-reference-design-tablet.dtsi"
46#include <dt-bindings/interrupt-controller/irq.h>
47
48/ {
49	model = "Utoo P66";
50	compatible = "utoo,p66", "allwinner,sun5i-a13";
51
52	/* The P66 uses the uart pins as gpios */
53	aliases {
54		/delete-property/serial0;
55	};
56
57	chosen {
58		/delete-property/stdout-path;
59	};
60
61	i2c_lcd: i2c@0 {
62		/* The lcd panel i2c interface is hooked up via gpios */
63		compatible = "i2c-gpio";
64		pinctrl-names = "default";
65		pinctrl-0 = <&i2c_lcd_pins>;
66		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
67			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
68		i2c-gpio,delay-us = <5>;
69	};
70};
71
72&backlight {
73	/* Note levels of 10 / 20% result in backlight off */
74	brightness-levels = <0 30 40 50 60 70 80 90 100>;
75	default-brightness-level = <6>;
76};
77
78&codec {
79	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
80};
81
82&codec_pa_pin {
83	allwinner,pins = "PG3";
84};
85
86&i2c1 {
87	icn8318: touchscreen@40 {
88		compatible = "chipone,icn8318";
89		reg = <0x40>;
90		interrupt-parent = <&pio>;
91		interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
92		pinctrl-names = "default";
93		pinctrl-0 = <&ts_wake_pin_p66>;
94		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
95		touchscreen-size-x = <800>;
96		touchscreen-size-y = <480>;
97		touchscreen-inverted-x;
98		touchscreen-swapped-x-y;
99	};
100};
101
102&mmc2 {
103	pinctrl-names = "default";
104	pinctrl-0 = <&mmc2_pins_a>;
105	vmmc-supply = <&reg_vcc3v3>;
106	bus-width = <8>;
107	non-removable;
108	status = "okay";
109
110	mmccard: mmccard@0 {
111		reg = <0>;
112		compatible = "mmc-card";
113		broken-hpi;
114	};
115};
116
117&pio {
118	i2c_lcd_pins: i2c_lcd_pin@0 {
119		allwinner,pins = "PG10", "PG12";
120		allwinner,function = "gpio_out";
121		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
122		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
123	};
124
125	ts_wake_pin_p66: ts_wake_pin@0 {
126		allwinner,pins = "PB3";
127		allwinner,function = "gpio_out";
128		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
129		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
130	};
131
132};
133
134&reg_usb0_vbus {
135	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
136};
137
138&uart1 {
139	/* The P66 uses the uart pins as gpios */
140	status = "disabled";
141};
142
143&usb0_vbus_pin_a {
144	allwinner,pins = "PB4";
145};
146