1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun5i-a13.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/input/input.h>
48#include <dt-bindings/interrupt-controller/irq.h>
49#include <dt-bindings/pinctrl/sun4i-a10.h>
50
51/ {
52	model = "INet-98V Rev 02";
53	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
54
55	aliases {
56		serial0 = &uart1;
57	};
58
59	chosen {
60		stdout-path = "serial0:115200n8";
61	};
62
63};
64
65&cpu0 {
66	cpu-supply = <&reg_dcdc2>;
67};
68
69&ehci0 {
70	status = "okay";
71};
72
73&i2c0 {
74	pinctrl-names = "default";
75	pinctrl-0 = <&i2c0_pins_a>;
76	status = "okay";
77
78	axp209: pmic@34 {
79		reg = <0x34>;
80		interrupts = <0>;
81	};
82};
83
84#include "axp209.dtsi"
85
86&i2c1 {
87	pinctrl-names = "default";
88	pinctrl-0 = <&i2c1_pins_a>;
89	status = "okay";
90
91	pcf8563: rtc@51 {
92		compatible = "nxp,pcf8563";
93		reg = <0x51>;
94	};
95};
96
97&lradc {
98	vref-supply = <&reg_ldo2>;
99	status = "okay";
100
101	button@200 {
102		label = "Volume Up";
103		linux,code = <KEY_VOLUMEUP>;
104		channel = <0>;
105		voltage = <200000>;
106	};
107
108	button@400 {
109		label = "Volume Down";
110		linux,code = <KEY_VOLUMEDOWN>;
111		channel = <0>;
112		voltage = <400000>;
113	};
114};
115
116&mmc0 {
117	pinctrl-names = "default";
118	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
119	vmmc-supply = <&reg_vcc3v3>;
120	bus-width = <4>;
121	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
122	cd-inverted;
123	status = "okay";
124};
125
126&mmc2 {
127	pinctrl-names = "default";
128	pinctrl-0 = <&mmc2_pins_a>;
129	vmmc-supply = <&reg_vcc3v3>;
130	bus-width = <8>;
131	non-removable;
132	status = "okay";
133
134	mmccard: mmccard@0 {
135		reg = <0>;
136		compatible = "mmc-card";
137		broken-hpi;
138	};
139};
140
141&otg_sram {
142	status = "okay";
143};
144
145&pio {
146	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
147		allwinner,pins = "PG0";
148		allwinner,function = "gpio_in";
149		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
150		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
151	};
152
153	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
154		allwinner,pins = "PG1";
155		allwinner,function = "gpio_in";
156		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
157		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
158	};
159
160	usb0_id_detect_pin: usb0_id_detect_pin@0 {
161		allwinner,pins = "PG2";
162		allwinner,function = "gpio_in";
163		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
164		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
165	};
166};
167
168&reg_dcdc2 {
169	regulator-always-on;
170	regulator-min-microvolt = <1000000>;
171	regulator-max-microvolt = <1400000>;
172	regulator-name = "vdd-cpu";
173};
174
175&reg_dcdc3 {
176	regulator-always-on;
177	regulator-min-microvolt = <1250000>;
178	regulator-max-microvolt = <1250000>;
179	regulator-name = "vdd-int-pll";
180};
181
182&reg_ldo1 {
183	regulator-name = "vdd-rtc";
184};
185
186&reg_ldo2 {
187	regulator-always-on;
188	regulator-min-microvolt = <3000000>;
189	regulator-max-microvolt = <3000000>;
190	regulator-name = "avcc";
191};
192
193&reg_ldo3 {
194	regulator-min-microvolt = <3300000>;
195	regulator-max-microvolt = <3300000>;
196	regulator-name = "vcc-wifi";
197};
198
199&reg_usb0_vbus {
200	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
201	status = "okay";
202};
203
204&reg_usb1_vbus {
205	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
206	status = "okay";
207};
208
209&uart1 {
210	pinctrl-names = "default";
211	pinctrl-0 = <&uart1_pins_b>;
212	status = "okay";
213};
214
215&usb_otg {
216	dr_mode = "otg";
217	status = "okay";
218};
219
220&usb0_vbus_pin_a {
221	allwinner,pins = "PG12";
222};
223
224&usb1_vbus_pin_a {
225	allwinner,pins = "PG11";
226};
227
228&usbphy {
229	pinctrl-names = "default";
230	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
231	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
232	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
233	usb0_vbus-supply = <&reg_usb0_vbus>;
234	usb1_vbus-supply = <&reg_usb1_vbus>;
235	status = "okay";
236};
237