1/*
2 * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun5i-a13.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/pinctrl/sun4i-a10.h>
49
50/ {
51	model = "HSG H702";
52	compatible = "hsg,h702", "allwinner,sun5i-a13";
53
54	aliases {
55		serial0 = &uart1;
56	};
57
58	chosen {
59		stdout-path = "serial0:115200n8";
60	};
61};
62
63&cpu0 {
64	cpu-supply = <&reg_dcdc2>;
65};
66
67&ehci0 {
68	status = "okay";
69};
70
71&i2c0 {
72	pinctrl-names = "default";
73	pinctrl-0 = <&i2c0_pins_a>;
74	status = "okay";
75
76	axp209: pmic@34 {
77		reg = <0x34>;
78		interrupts = <0>;
79	};
80};
81
82&i2c1 {
83	pinctrl-names = "default";
84	pinctrl-0 = <&i2c1_pins_a>;
85	status = "okay";
86
87	pcf8563: rtc@51 {
88		compatible = "nxp,pcf8563";
89		reg = <0x51>;
90	};
91};
92
93&i2c2 {
94	pinctrl-names = "default";
95	pinctrl-0 = <&i2c2_pins_a>;
96	status = "okay";
97};
98
99&mmc0 {
100	pinctrl-names = "default";
101	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
102	vmmc-supply = <&reg_vcc3v3>;
103	bus-width = <4>;
104	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
105	cd-inverted;
106	status = "okay";
107};
108
109&ohci0 {
110	status = "okay";
111};
112
113&pio {
114	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
115		allwinner,pins = "PG0";
116		allwinner,function = "gpio_in";
117		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
118		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
119	};
120};
121
122#include "axp209.dtsi"
123
124&reg_dcdc2 {
125	regulator-always-on;
126	regulator-min-microvolt = <1000000>;
127	regulator-max-microvolt = <1500000>;
128	regulator-name = "vdd-cpu";
129};
130
131&reg_dcdc3 {
132	regulator-always-on;
133	regulator-min-microvolt = <1000000>;
134	regulator-max-microvolt = <1400000>;
135	regulator-name = "vdd-int-dll";
136};
137
138&reg_ldo1 {
139	regulator-name = "vdd-rtc";
140};
141
142&reg_ldo2 {
143	regulator-always-on;
144	regulator-min-microvolt = <3000000>;
145	regulator-max-microvolt = <3000000>;
146	regulator-name = "avcc";
147};
148
149&reg_ldo3 {
150	regulator-min-microvolt = <3300000>;
151	regulator-max-microvolt = <3300000>;
152	regulator-name = "vcc-wifi";
153};
154
155&uart1 {
156	pinctrl-names = "default";
157	pinctrl-0 = <&uart1_pins_b>;
158	status = "okay";
159};
160
161&usbphy {
162	usb1_vbus-supply = <&reg_ldo3>;
163	status = "okay";
164};
165