1/* 2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun5i-a10s.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48 49/ { 50 model = "R7 A10s hdmi tv-stick"; 51 compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; 52 53 aliases { 54 serial0 = &uart0; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 leds { 62 compatible = "gpio-leds"; 63 pinctrl-names = "default"; 64 pinctrl-0 = <&led_pins_r7>; 65 66 green { 67 label = "r7-tv-dongle:green:usr"; 68 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; 69 default-state = "on"; 70 }; 71 }; 72}; 73 74&ehci0 { 75 status = "okay"; 76}; 77 78&mmc0 { 79 pinctrl-names = "default"; 80 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; 81 vmmc-supply = <®_vcc3v3>; 82 bus-width = <4>; 83 cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ 84 status = "okay"; 85}; 86 87&mmc1 { 88 pinctrl-names = "default"; 89 pinctrl-0 = <&mmc1_pins_a>; 90 vmmc-supply = <®_vcc3v3>; 91 bus-width = <4>; 92 non-removable; 93 status = "okay"; 94}; 95 96&ohci0 { 97 status = "okay"; 98}; 99 100&pio { 101 mmc0_cd_pin_r7: mmc0_cd_pin@0 { 102 pins = "PG1"; 103 function = "gpio_in"; 104 bias-pull-up; 105 }; 106 107 led_pins_r7: led_pins@0 { 108 pins = "PB2"; 109 function = "gpio_out"; 110 drive-strength = <20>; 111 }; 112 113 usb1_vbus_pin_r7: usb1_vbus_pin@0 { 114 pins = "PG13"; 115 function = "gpio_out"; 116 }; 117}; 118 119®_usb1_vbus { 120 pinctrl-0 = <&usb1_vbus_pin_r7>; 121 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; 122 status = "okay"; 123}; 124 125&uart0 { 126 pinctrl-names = "default"; 127 pinctrl-0 = <&uart0_pins_a>; 128 status = "okay"; 129}; 130 131&usbphy { 132 usb1_vbus-supply = <®_usb1_vbus>; 133 status = "okay"; 134}; 135