1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun5i-a10s.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47
48/ {
49	model = "MK802-A10s";
50	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
51
52	aliases {
53		serial0 = &uart0;
54	};
55
56	chosen {
57		stdout-path = "serial0:115200n8";
58	};
59
60	leds {
61		compatible = "gpio-leds";
62		pinctrl-names = "default";
63		pinctrl-0 = <&led_pins_mk802>;
64
65		red {
66			label = "mk802:red:usr";
67			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
68		};
69	};
70};
71
72&ehci0 {
73	status = "okay";
74};
75
76&i2c0 {
77	pinctrl-names = "default";
78	pinctrl-0 = <&i2c0_pins_a>;
79	status = "okay";
80
81	axp152: pmic@30 {
82		compatible = "x-powers,axp152";
83		reg = <0x30>;
84		interrupts = <0>;
85		interrupt-controller;
86		#interrupt-cells = <1>;
87	};
88};
89
90&mmc0 {
91	pinctrl-names = "default";
92	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
93	vmmc-supply = <&reg_vcc3v3>;
94	bus-width = <4>;
95	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
96	cd-inverted;
97	status = "okay";
98};
99
100&mmc1 {
101	pinctrl-names = "default";
102	pinctrl-0 = <&mmc1_pins_a>;
103	vmmc-supply = <&reg_vcc3v3>;
104	bus-width = <4>;
105	non-removable;
106	status = "okay";
107};
108
109&ohci0 {
110	status = "okay";
111};
112
113&otg_sram {
114	status = "okay";
115};
116
117&pio {
118	led_pins_mk802: led_pins@0 {
119		allwinner,pins = "PB2";
120		allwinner,function = "gpio_out";
121		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
122		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
123	};
124
125	mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
126		allwinner,pins = "PG1";
127		allwinner,function = "gpio_in";
128		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
129		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
130	};
131
132	usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
133		allwinner,pins = "PB10";
134		allwinner,function = "gpio_out";
135		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
136		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
137	};
138};
139
140&reg_usb1_vbus {
141	pinctrl-0 = <&usb1_vbus_pin_mk802>;
142	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
143	status = "okay";
144};
145
146&uart0 {
147	pinctrl-names = "default";
148	pinctrl-0 = <&uart0_pins_a>;
149	status = "okay";
150};
151
152&usb_otg {
153	dr_mode = "otg";
154	status = "okay";
155};
156
157&usbphy {
158	usb1_vbus-supply = <&reg_usb1_vbus>;
159	status = "okay";
160};
161