1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun5i-a10s.dtsi"
50#include "sunxi-common-regulators.dtsi"
51#include <dt-bindings/gpio/gpio.h>
52#include <dt-bindings/pinctrl/sun4i-a10.h>
53
54/ {
55	model = "Auxtek t004 A10s hdmi tv-stick";
56	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
57
58	aliases {
59		serial0 = &uart0;
60	};
61
62	chosen {
63		stdout-path = "serial0:115200n8";
64	};
65
66	leds {
67		compatible = "gpio-leds";
68		pinctrl-names = "default";
69		pinctrl-0 = <&led_pins_t004>;
70
71		red {
72			label = "t004-tv-dongle:red:usr";
73			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
74			default-state = "on";
75		};
76	};
77
78	reg_vmmc1: vmmc1 {
79		compatible = "regulator-fixed";
80		pinctrl-names = "default";
81		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
82		regulator-name = "vmmc1";
83		regulator-min-microvolt = <3300000>;
84		regulator-max-microvolt = <3300000>;
85		enable-active-high;
86		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
87	};
88};
89
90&ehci0 {
91	status = "okay";
92};
93
94&mmc0 {
95	pinctrl-names = "default";
96	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
97	vmmc-supply = <&reg_vcc3v3>;
98	bus-width = <4>;
99	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
100	cd-inverted;
101	status = "okay";
102};
103
104&mmc1 {
105	pinctrl-names = "default";
106	pinctrl-0 = <&mmc1_pins_a>;
107	vmmc-supply = <&reg_vmmc1>;
108	bus-width = <4>;
109	non-removable;
110	cap-sdio-irq;
111	status = "okay";
112};
113
114&ohci0 {
115	status = "okay";
116};
117
118&pio {
119	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
120		allwinner,pins = "PG1";
121		allwinner,function = "gpio_in";
122		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
123		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
124	};
125
126	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
127		allwinner,pins = "PB18";
128		allwinner,function = "gpio_out";
129		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
130		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
131	};
132
133	led_pins_t004: led_pins@0 {
134		allwinner,pins = "PB2";
135		allwinner,function = "gpio_out";
136		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
137		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
138	};
139};
140
141&reg_usb1_vbus {
142	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
143	status = "okay";
144};
145
146&uart0 {
147	pinctrl-names = "default";
148	pinctrl-0 = <&uart0_pins_a>;
149	status = "okay";
150};
151
152&usb1_vbus_pin_a {
153	allwinner,pins = "PG13";
154};
155
156&usbphy {
157	usb1_vbus-supply = <&reg_usb1_vbus>;
158	status = "okay";
159};
160