1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun5i-a10s.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/pinctrl/sun4i-a10.h>
48
49/ {
50	model = "Auxtek t004 A10s hdmi tv-stick";
51	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
52
53	aliases {
54		serial0 = &uart0;
55	};
56
57	chosen {
58		stdout-path = "serial0:115200n8";
59	};
60
61	leds {
62		compatible = "gpio-leds";
63		pinctrl-names = "default";
64		pinctrl-0 = <&led_pins_t004>;
65
66		red {
67			label = "t004-tv-dongle:red:usr";
68			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
69			default-state = "on";
70		};
71	};
72
73	reg_vmmc1: vmmc1 {
74		compatible = "regulator-fixed";
75		pinctrl-names = "default";
76		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
77		regulator-name = "vmmc1";
78		regulator-min-microvolt = <3300000>;
79		regulator-max-microvolt = <3300000>;
80		enable-active-high;
81		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
82	};
83};
84
85&ehci0 {
86	status = "okay";
87};
88
89&mmc0 {
90	pinctrl-names = "default";
91	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
92	vmmc-supply = <&reg_vcc3v3>;
93	bus-width = <4>;
94	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
95	cd-inverted;
96	status = "okay";
97};
98
99&mmc1 {
100	pinctrl-names = "default";
101	pinctrl-0 = <&mmc1_pins_a>;
102	vmmc-supply = <&reg_vmmc1>;
103	bus-width = <4>;
104	non-removable;
105	cap-sdio-irq;
106	status = "okay";
107};
108
109&ohci0 {
110	status = "okay";
111};
112
113&pio {
114	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
115		allwinner,pins = "PG1";
116		allwinner,function = "gpio_in";
117		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
118		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
119	};
120
121	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
122		allwinner,pins = "PB18";
123		allwinner,function = "gpio_out";
124		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
125		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
126	};
127
128	led_pins_t004: led_pins@0 {
129		allwinner,pins = "PB2";
130		allwinner,function = "gpio_out";
131		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
132		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
133	};
134};
135
136&reg_usb1_vbus {
137	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
138	status = "okay";
139};
140
141&uart0 {
142	pinctrl-names = "default";
143	pinctrl-0 = <&uart0_pins_a>;
144	status = "okay";
145};
146
147&usb1_vbus_pin_a {
148	allwinner,pins = "PG13";
149};
150
151&usbphy {
152	usb1_vbus-supply = <&reg_usb1_vbus>;
153	status = "okay";
154};
155