1 /* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43 /dts-v1/; 44 #include "sun5i-a10s.dtsi" 45 #include "sunxi-common-regulators.dtsi" 46 #include <dt-bindings/gpio/gpio.h> 47 #include <dt-bindings/pinctrl/sun4i-a10.h> 48 49 / { 50 model = "Auxtek t003 A10s hdmi tv-stick"; 51 compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s"; 52 53 aliases { 54 serial0 = &uart0; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 leds { 62 compatible = "gpio-leds"; 63 pinctrl-names = "default"; 64 pinctrl-0 = <&led_pins_t003>; 65 66 red { 67 label = "t003-tv-dongle:red:usr"; 68 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ 69 default-state = "on"; 70 }; 71 }; 72 }; 73 74 &ehci0 { 75 status = "okay"; 76 }; 77 78 &i2c0 { 79 pinctrl-names = "default"; 80 pinctrl-0 = <&i2c0_pins_a>; 81 status = "okay"; 82 83 axp152: pmic@30 { 84 compatible = "x-powers,axp152"; 85 reg = <0x30>; 86 interrupts = <0>; 87 interrupt-controller; 88 #interrupt-cells = <1>; 89 }; 90 }; 91 92 &mmc0 { 93 pinctrl-names = "default"; 94 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; 95 vmmc-supply = <®_vcc3v3>; 96 bus-width = <4>; 97 cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ 98 cd-inverted; 99 status = "okay"; 100 }; 101 102 &ohci0 { 103 status = "okay"; 104 }; 105 106 &otg_sram { 107 status = "okay"; 108 }; 109 110 &pio { 111 mmc0_cd_pin_t003: mmc0_cd_pin@0 { 112 allwinner,pins = "PG1"; 113 allwinner,function = "gpio_in"; 114 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 115 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 116 }; 117 118 led_pins_t003: led_pins@0 { 119 allwinner,pins = "PB2"; 120 allwinner,function = "gpio_out"; 121 allwinner,drive = <SUN4I_PINCTRL_20_MA>; 122 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 123 }; 124 }; 125 126 ®_usb0_vbus { 127 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ 128 status = "okay"; 129 }; 130 131 ®_usb1_vbus { 132 gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ 133 status = "okay"; 134 }; 135 136 &uart0 { 137 pinctrl-names = "default"; 138 pinctrl-0 = <&uart0_pins_a>; 139 status = "okay"; 140 }; 141 142 &usb0_vbus_pin_a { 143 allwinner,pins = "PG13"; 144 }; 145 146 &usb1_vbus_pin_a { 147 allwinner,pins = "PB10"; 148 }; 149 150 &usb_otg { 151 dr_mode = "host"; 152 status = "okay"; 153 }; 154 155 &usbphy { 156 usb0_vbus-supply = <®_usb0_vbus>; 157 usb1_vbus-supply = <®_usb1_vbus>; 158 status = "okay"; 159 }; 160