1/*
2 * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
3 *
4 * Based on sun50i-h5-orangepi-pc2.dts, which is:
5 *   Copyright (C) 2016 ARM Ltd.
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 *
12 *  a) This file is free software; you can redistribute it and/or
13 *     modify it under the terms of the GNU General Public License as
14 *     published by the Free Software Foundation; either version 2 of the
15 *     License, or (at your option) any later version.
16 *
17 *     This file is distributed in the hope that it will be useful,
18 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
19 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20 *     GNU General Public License for more details.
21 *
22 * Or, alternatively,
23 *
24 *  b) Permission is hereby granted, free of charge, to any person
25 *     obtaining a copy of this software and associated documentation
26 *     files (the "Software"), to deal in the Software without
27 *     restriction, including without limitation the rights to use,
28 *     copy, modify, merge, publish, distribute, sublicense, and/or
29 *     sell copies of the Software, and to permit persons to whom the
30 *     Software is furnished to do so, subject to the following
31 *     conditions:
32 *
33 *     The above copyright notice and this permission notice shall be
34 *     included in all copies or substantial portions of the Software.
35 *
36 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
37 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
38 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
39 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
40 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
41 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
42 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
43 *     OTHER DEALINGS IN THE SOFTWARE.
44 */
45
46/dts-v1/;
47#include "sun50i-h5.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/input/input.h>
51
52/ {
53	model = "Xunlong Orange Pi Prime";
54	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
55
56	aliases {
57		ethernet0 = &emac;
58		serial0 = &uart0;
59	};
60
61	chosen {
62		stdout-path = "serial0:115200n8";
63	};
64
65	connector {
66		compatible = "hdmi-connector";
67		type = "a";
68
69		port {
70			hdmi_con_in: endpoint {
71				remote-endpoint = <&hdmi_out_con>;
72			};
73		};
74	};
75
76	leds {
77		compatible = "gpio-leds";
78
79		pwr {
80			label = "orangepi:green:pwr";
81			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
82			default-state = "on";
83		};
84
85		status {
86			label = "orangepi:red:status";
87			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
88		};
89	};
90
91	r-gpio-keys {
92		compatible = "gpio-keys";
93
94		sw4 {
95			label = "sw4";
96			linux,code = <BTN_0>;
97			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
98		};
99	};
100
101	reg_gmac_3v3: gmac-3v3 {
102		compatible = "regulator-fixed";
103		regulator-name = "gmac-3v3";
104		regulator-min-microvolt = <3300000>;
105		regulator-max-microvolt = <3300000>;
106		startup-delay-us = <100000>;
107		enable-active-high;
108		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
109	};
110
111	reg_vcc3v3: vcc3v3 {
112		compatible = "regulator-fixed";
113		regulator-name = "vcc3v3";
114		regulator-min-microvolt = <3300000>;
115		regulator-max-microvolt = <3300000>;
116	};
117
118	reg_usb0_vbus: usb0-vbus {
119		compatible = "regulator-fixed";
120		regulator-name = "usb0-vbus";
121		regulator-min-microvolt = <5000000>;
122		regulator-max-microvolt = <5000000>;
123		enable-active-high;
124		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
125		status = "okay";
126	};
127
128	wifi_pwrseq: wifi_pwrseq {
129		compatible = "mmc-pwrseq-simple";
130		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
131	};
132};
133
134&codec {
135	allwinner,audio-routing =
136		"Line Out", "LINEOUT",
137		"MIC1", "Mic",
138		"Mic",  "MBIAS";
139	status = "okay";
140};
141
142&de {
143	status = "okay";
144};
145
146&ehci0 {
147	status = "okay";
148};
149
150&ehci1 {
151	status = "okay";
152};
153
154&ehci2 {
155	status = "okay";
156};
157
158&ehci3 {
159	status = "okay";
160};
161
162&emac {
163	pinctrl-names = "default";
164	pinctrl-0 = <&emac_rgmii_pins>;
165	phy-supply = <&reg_gmac_3v3>;
166	phy-handle = <&ext_rgmii_phy>;
167	phy-mode = "rgmii";
168	status = "okay";
169};
170
171&external_mdio {
172	ext_rgmii_phy: ethernet-phy@1 {
173		compatible = "ethernet-phy-ieee802.3-c22";
174		reg = <1>;
175	};
176};
177
178&hdmi {
179	status = "okay";
180};
181
182&hdmi_out {
183	hdmi_out_con: endpoint {
184		remote-endpoint = <&hdmi_con_in>;
185	};
186};
187
188&ir {
189	pinctrl-names = "default";
190	pinctrl-0 = <&ir_pins_a>;
191	status = "okay";
192};
193
194&mmc0 {
195	vmmc-supply = <&reg_vcc3v3>;
196	bus-width = <4>;
197	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
198	status = "okay";
199};
200
201&mmc1 {
202	vmmc-supply = <&reg_vcc3v3>;
203	mmc-pwrseq = <&wifi_pwrseq>;
204	bus-width = <4>;
205	non-removable;
206	status = "okay";
207};
208
209&ohci0 {
210	status = "okay";
211};
212
213&ohci1 {
214	status = "okay";
215};
216
217&ohci2 {
218	status = "okay";
219};
220
221&ohci3 {
222	status = "okay";
223};
224
225&uart0 {
226	pinctrl-names = "default";
227	pinctrl-0 = <&uart0_pins_a>;
228	status = "okay";
229};
230
231&uart1 {
232	pinctrl-names = "default";
233	pinctrl-0 = <&uart1_pins>;
234	status = "disabled";
235};
236
237&uart2 {
238	pinctrl-names = "default";
239	pinctrl-0 = <&uart2_pins>;
240	status = "disabled";
241};
242
243&usb_otg {
244	dr_mode = "otg";
245	status = "okay";
246};
247
248&usbphy {
249	/* USB Type-A ports' VBUS is always on */
250	usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
251	usb0_vbus-supply = <&reg_usb0_vbus>;
252	status = "okay";
253};
254