1/* 2 * Copyright (C) 2016 ARM Ltd. 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun50i-h5.dtsi" 45 46#include <dt-bindings/gpio/gpio.h> 47#include <dt-bindings/input/input.h> 48#include <dt-bindings/pinctrl/sun4i-a10.h> 49 50/ { 51 model = "Xunlong Orange Pi PC 2"; 52 compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5"; 53 54 reg_vcc3v3: vcc3v3 { 55 compatible = "regulator-fixed"; 56 regulator-name = "vcc3v3"; 57 regulator-min-microvolt = <3300000>; 58 regulator-max-microvolt = <3300000>; 59 }; 60 61 aliases { 62 ethernet0 = &emac; 63 serial0 = &uart0; 64 }; 65 66 chosen { 67 stdout-path = "serial0:115200n8"; 68 }; 69 70 connector { 71 compatible = "hdmi-connector"; 72 type = "a"; 73 74 port { 75 hdmi_con_in: endpoint { 76 remote-endpoint = <&hdmi_out_con>; 77 }; 78 }; 79 }; 80 81 leds { 82 compatible = "gpio-leds"; 83 84 pwr { 85 label = "orangepi:green:pwr"; 86 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; 87 default-state = "on"; 88 }; 89 90 status { 91 label = "orangepi:red:status"; 92 gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; 93 }; 94 }; 95 96 r-gpio-keys { 97 compatible = "gpio-keys"; 98 99 sw4 { 100 label = "sw4"; 101 linux,code = <BTN_0>; 102 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; 103 }; 104 }; 105 106 reg_gmac_3v3: gmac-3v3 { 107 compatible = "regulator-fixed"; 108 regulator-name = "gmac-3v3"; 109 regulator-min-microvolt = <3300000>; 110 regulator-max-microvolt = <3300000>; 111 startup-delay-us = <100000>; 112 enable-active-high; 113 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; 114 }; 115 116 reg_usb0_vbus: usb0-vbus { 117 compatible = "regulator-fixed"; 118 regulator-name = "usb0-vbus"; 119 regulator-min-microvolt = <5000000>; 120 regulator-max-microvolt = <5000000>; 121 enable-active-high; 122 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ 123 status = "okay"; 124 }; 125}; 126 127&codec { 128 allwinner,audio-routing = 129 "Line Out", "LINEOUT", 130 "MIC1", "Mic", 131 "Mic", "MBIAS"; 132 status = "okay"; 133}; 134 135&de { 136 status = "okay"; 137}; 138 139&ehci0 { 140 status = "okay"; 141}; 142 143&ehci1 { 144 status = "okay"; 145}; 146 147&ehci2 { 148 status = "okay"; 149}; 150 151&ehci3 { 152 status = "okay"; 153}; 154 155&emac { 156 pinctrl-names = "default"; 157 pinctrl-0 = <&emac_rgmii_pins>; 158 phy-supply = <®_gmac_3v3>; 159 phy-handle = <&ext_rgmii_phy>; 160 phy-mode = "rgmii"; 161 status = "okay"; 162}; 163 164&external_mdio { 165 ext_rgmii_phy: ethernet-phy@1 { 166 compatible = "ethernet-phy-ieee802.3-c22"; 167 reg = <1>; 168 }; 169}; 170 171&hdmi { 172 status = "okay"; 173}; 174 175&hdmi_out { 176 hdmi_out_con: endpoint { 177 remote-endpoint = <&hdmi_con_in>; 178 }; 179}; 180 181&ir { 182 pinctrl-names = "default"; 183 pinctrl-0 = <&ir_pins_a>; 184 status = "okay"; 185}; 186 187&mmc0 { 188 vmmc-supply = <®_vcc3v3>; 189 bus-width = <4>; 190 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ 191 status = "okay"; 192}; 193 194&ohci0 { 195 status = "okay"; 196}; 197 198&ohci1 { 199 status = "okay"; 200}; 201 202&ohci2 { 203 status = "okay"; 204}; 205 206&ohci3 { 207 status = "okay"; 208}; 209 210&uart0 { 211 pinctrl-names = "default"; 212 pinctrl-0 = <&uart0_pins_a>; 213 status = "okay"; 214}; 215 216&uart1 { 217 pinctrl-names = "default"; 218 pinctrl-0 = <&uart1_pins>; 219 status = "disabled"; 220}; 221 222&uart2 { 223 pinctrl-names = "default"; 224 pinctrl-0 = <&uart2_pins>; 225 status = "disabled"; 226}; 227 228&usb_otg { 229 dr_mode = "otg"; 230 status = "okay"; 231}; 232 233&usbphy { 234 /* USB Type-A ports' VBUS is always on */ 235 usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ 236 usb0_vbus-supply = <®_usb0_vbus>; 237 status = "okay"; 238}; 239