1/*
2 * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun4i-a10.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50	model = "Olimex A10-OLinuXino-LIME";
51	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
52
53	aliases {
54		serial0 = &uart0;
55	};
56
57	chosen {
58		stdout-path = "serial0:115200n8";
59	};
60
61	hdmi-connector {
62		compatible = "hdmi-connector";
63		type = "a";
64
65		port {
66			hdmi_con_in: endpoint {
67				remote-endpoint = <&hdmi_out_con>;
68			};
69		};
70	};
71
72	leds {
73		compatible = "gpio-leds";
74		pinctrl-names = "default";
75		pinctrl-0 = <&led_pins_olinuxinolime>;
76
77		green {
78			label = "a10-olinuxino-lime:green:usr";
79			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
80			default-state = "on";
81		};
82	};
83};
84
85&ahci {
86	target-supply = <&reg_ahci_5v>;
87	status = "okay";
88};
89
90&cpu0 {
91	/*
92	 * The A10-Lime is known to be unstable when running at 1008 MHz
93	 */
94	operating-points = <
95		/* kHz    uV */
96		912000  1350000
97		864000  1300000
98		624000  1250000
99		>;
100};
101
102&de {
103	status = "okay";
104};
105
106&ehci0 {
107	status = "okay";
108};
109
110&ehci1 {
111	status = "okay";
112};
113
114&emac {
115	phy = <&phy1>;
116	status = "okay";
117};
118
119&emac_sram {
120	status = "okay";
121};
122
123&hdmi {
124	status = "okay";
125};
126
127&hdmi_out {
128	hdmi_out_con: endpoint {
129		remote-endpoint = <&hdmi_con_in>;
130	};
131};
132
133&i2c0 {
134	status = "okay";
135
136	axp209: pmic@34 {
137		compatible = "x-powers,axp209";
138		reg = <0x34>;
139		interrupts = <0>;
140
141		interrupt-controller;
142		#interrupt-cells = <1>;
143	};
144};
145
146&i2c1 {
147	status = "okay";
148
149	eeprom: eeprom@50 {
150		compatible = "atmel,24c16";
151		reg = <0x50>;
152		pagesize = <16>;
153	};
154};
155
156&mdio {
157	status = "okay";
158
159	phy1: ethernet-phy@1 {
160		reg = <1>;
161	};
162};
163
164&mmc0 {
165	vmmc-supply = <&reg_vcc3v3>;
166	bus-width = <4>;
167	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
168	status = "okay";
169};
170
171&ohci0 {
172	status = "okay";
173};
174
175&ohci1 {
176	status = "okay";
177};
178
179&otg_sram {
180	status = "okay";
181};
182
183&pio {
184	led_pins_olinuxinolime: led-pin {
185		pins = "PH2";
186		function = "gpio_out";
187		drive-strength = <20>;
188	};
189
190	usb0_id_detect_pin: usb0-id-detect-pin {
191		pins = "PH4";
192		function = "gpio_in";
193		bias-pull-up;
194	};
195
196	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
197		pins = "PH5";
198		function = "gpio_in";
199		bias-pull-down;
200	};
201};
202
203&reg_ahci_5v {
204	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
205	status = "okay";
206};
207
208&reg_usb0_vbus {
209	status = "okay";
210};
211
212&reg_usb1_vbus {
213	status = "okay";
214};
215
216&reg_usb2_vbus {
217	status = "okay";
218};
219
220&uart0 {
221	pinctrl-names = "default";
222	pinctrl-0 = <&uart0_pb_pins>;
223	status = "okay";
224};
225
226&usb_otg {
227	dr_mode = "otg";
228	status = "okay";
229};
230
231&usbphy {
232	pinctrl-names = "default";
233	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
234	usb0_id_det-gpio   = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
235	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
236	usb0_vbus-supply   = <&reg_usb0_vbus>;
237	usb1_vbus-supply = <&reg_usb1_vbus>;
238	usb2_vbus-supply = <&reg_usb2_vbus>;
239	status = "okay";
240};
241