1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun4i-a10.dtsi"
50#include "sunxi-common-regulators.dtsi"
51#include <dt-bindings/gpio/gpio.h>
52
53/ {
54	model = "MK802ii";
55	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
56
57	aliases {
58		serial0 = &uart0;
59	};
60
61	chosen {
62		stdout-path = "serial0:115200n8";
63	};
64};
65
66&ehci0 {
67	status = "okay";
68};
69
70&ehci1 {
71	status = "okay";
72};
73
74&i2c0 {
75	pinctrl-names = "default";
76	pinctrl-0 = <&i2c0_pins_a>;
77	status = "okay";
78
79	axp209: pmic@34 {
80		compatible = "x-powers,axp209";
81		reg = <0x34>;
82		interrupts = <0>;
83
84		interrupt-controller;
85		#interrupt-cells = <1>;
86	};
87};
88
89&mmc0 {
90	pinctrl-names = "default";
91	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
92	vmmc-supply = <&reg_vcc3v3>;
93	bus-width = <4>;
94	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
95	cd-inverted;
96	status = "okay";
97};
98
99&ohci0 {
100	status = "okay";
101};
102
103&reg_usb1_vbus {
104	status = "okay";
105};
106
107&reg_usb2_vbus {
108	status = "okay";
109};
110
111&uart0 {
112	pinctrl-names = "default";
113	pinctrl-0 = <&uart0_pins_a>;
114	status = "okay";
115};
116
117&usbphy {
118	usb1_vbus-supply = <&reg_usb1_vbus>;
119	usb2_vbus-supply = <&reg_usb2_vbus>;
120	status = "okay";
121};
122