1/*
2 * Copyright 2015 Gábor Nyers
3 *
4 * Gábor Nyers <gabor.nyers@gmail.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 *     You should have received a copy of the GNU General Public
22 *     License along with this file; if not, write to the Free
23 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
24 *     MA 02110-1301 USA
25 *
26 * Or, alternatively,
27 *
28 *  b) Permission is hereby granted, free of charge, to any person
29 *     obtaining a copy of this software and associated documentation
30 *     files (the "Software"), to deal in the Software without
31 *     restriction, including without limitation the rights to use,
32 *     copy, modify, merge, publish, distribute, sublicense, and/or
33 *     sell copies of the Software, and to permit persons to whom the
34 *     Software is furnished to do so, subject to the following
35 *     conditions:
36 *
37 *     The above copyright notice and this permission notice shall be
38 *     included in all copies or substantial portions of the Software.
39 *
40 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 *     OTHER DEALINGS IN THE SOFTWARE.
48 */
49
50/dts-v1/;
51#include "sun4i-a10.dtsi"
52#include "sunxi-common-regulators.dtsi"
53
54#include <dt-bindings/gpio/gpio.h>
55#include <dt-bindings/pinctrl/sun4i-a10.h>
56
57/ {
58	model = "Jesurun Q5";
59	compatible = "jesurun,q5", "allwinner,sun4i-a10";
60
61	aliases {
62		serial0 = &uart0;
63	};
64
65	chosen {
66		stdout-path = "serial0:115200n8";
67	};
68
69	leds {
70		compatible = "gpio-leds";
71		pinctrl-names = "default";
72		pinctrl-0 = <&led_pins_q5>;
73
74		green {
75			label = "q5:green:usr";
76			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
77		};
78
79	};
80
81	reg_emac_3v3: emac-3v3 {
82		compatible = "regulator-fixed";
83		pinctrl-names = "default";
84		pinctrl-0 = <&emac_power_pin_q5>;
85		regulator-name = "emac-3v3";
86		regulator-min-microvolt = <3300000>;
87		regulator-max-microvolt = <3300000>;
88		enable-active-high;
89		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
90	};
91};
92
93&ahci {
94	status = "okay";
95};
96
97&ehci0 {
98	status = "okay";
99};
100
101&ehci1 {
102	status = "okay";
103};
104
105&emac {
106	pinctrl-names = "default";
107	pinctrl-0 = <&emac_pins_a>;
108	phy = <&phy1>;
109	status = "okay";
110};
111
112&i2c0 {
113	pinctrl-names = "default";
114	pinctrl-0 = <&i2c0_pins_a>;
115	status = "okay";
116
117	axp209: pmic@34 {
118		compatible = "x-powers,axp209";
119		reg = <0x34>;
120		interrupts = <0>;
121
122		interrupt-controller;
123		#interrupt-cells = <1>;
124	};
125};
126
127&ir0 {
128	pinctrl-names = "default";
129	pinctrl-0 = <&ir0_pins_a>;
130	status = "okay";
131};
132
133&mdio {
134	phy-supply = <&reg_emac_3v3>;
135	status = "okay";
136
137	phy1: ethernet-phy@1 {
138		reg = <1>;
139	};
140};
141
142&mmc0 {
143	pinctrl-names = "default";
144	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
145	vmmc-supply = <&reg_vcc3v3>;
146	bus-width = <4>;
147	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
148	cd-inverted;
149	status = "okay";
150};
151
152&ohci0 {
153	status = "okay";
154};
155
156&ohci1 {
157	status = "okay";
158};
159
160&pio {
161	emac_power_pin_q5: emac_power_pin@0 {
162		allwinner,pins = "PH19";
163		allwinner,function = "gpio_out";
164		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
165		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
166	};
167
168	led_pins_q5: led_pins@0 {
169		allwinner,pins = "PH20";
170		allwinner,function = "gpio_out";
171		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
172		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
173	};
174};
175
176&reg_usb1_vbus {
177	status = "okay";
178};
179
180&reg_usb2_vbus {
181	status = "okay";
182};
183
184&uart0 {
185	pinctrl-names = "default";
186	pinctrl-0 = <&uart0_pins_a>;
187	status = "okay";
188};
189
190&usbphy {
191	usb1_vbus-supply = <&reg_usb1_vbus>;
192	usb2_vbus-supply = <&reg_usb2_vbus>;
193	status = "okay";
194};
195