1/*
2 * Copyright 2014 Open Source Support GmbH
3 *
4 * David Lanzend�rfer <david.lanzendoerfer@o2s.ch>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 *     You should have received a copy of the GNU General Public
22 *     License along with this file; if not, write to the Free
23 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
24 *     MA 02110-1301 USA
25 *
26 * Or, alternatively,
27 *
28 *  b) Permission is hereby granted, free of charge, to any person
29 *     obtaining a copy of this software and associated documentation
30 *     files (the "Software"), to deal in the Software without
31 *     restriction, including without limitation the rights to use,
32 *     copy, modify, merge, publish, distribute, sublicense, and/or
33 *     sell copies of the Software, and to permit persons to whom the
34 *     Software is furnished to do so, subject to the following
35 *     conditions:
36 *
37 *     The above copyright notice and this permission notice shall be
38 *     included in all copies or substantial portions of the Software.
39 *
40 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 *     OTHER DEALINGS IN THE SOFTWARE.
48 */
49
50/dts-v1/;
51#include "sun4i-a10.dtsi"
52#include "sunxi-common-regulators.dtsi"
53
54#include <dt-bindings/gpio/gpio.h>
55
56/ {
57	model = "INet-97F Rev 02";
58	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
59
60	aliases {
61		serial0 = &uart0;
62	};
63
64	chosen {
65		stdout-path = "serial0:115200n8";
66	};
67};
68
69&ehci0 {
70	status = "okay";
71};
72
73&ehci1 {
74	status = "okay";
75};
76
77&i2c0 {
78	pinctrl-names = "default";
79	pinctrl-0 = <&i2c0_pins_a>;
80	status = "okay";
81
82	axp209: pmic@34 {
83		compatible = "x-powers,axp209";
84		reg = <0x34>;
85		interrupts = <0>;
86
87		interrupt-controller;
88		#interrupt-cells = <1>;
89	};
90};
91
92&mmc0 {
93	pinctrl-names = "default";
94	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
95	vmmc-supply = <&reg_vcc3v3>;
96	bus-width = <4>;
97	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
98	cd-inverted;
99	status = "okay";
100};
101
102&ohci0 {
103	status = "okay";
104};
105
106&ohci1 {
107	status = "okay";
108};
109
110&reg_usb1_vbus {
111	status = "okay";
112};
113
114&reg_usb2_vbus {
115	status = "okay";
116};
117
118&uart0 {
119	pinctrl-names = "default";
120	pinctrl-0 = <&uart0_pins_a>;
121	status = "okay";
122};
123
124&usbphy {
125	usb1_vbus-supply = <&reg_usb1_vbus>;
126	usb2_vbus-supply = <&reg_usb2_vbus>;
127	status = "okay";
128};
129