1/* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48/dts-v1/; 49#include "sun4i-a10.dtsi" 50#include "sunxi-common-regulators.dtsi" 51#include <dt-bindings/gpio/gpio.h> 52#include <dt-bindings/input/input.h> 53 54/ { 55 model = "Chuwi V7 CW0825"; 56 compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; 57 58 aliases { 59 serial0 = &uart0; 60 }; 61 62 chosen { 63 stdout-path = "serial0:115200n8"; 64 }; 65}; 66 67&ehci1 { 68 status = "okay"; 69}; 70 71&i2c0 { 72 pinctrl-names = "default"; 73 pinctrl-0 = <&i2c0_pins_a>; 74 status = "okay"; 75 76 axp209: pmic@34 { 77 compatible = "x-powers,axp209"; 78 reg = <0x34>; 79 interrupts = <0>; 80 81 interrupt-controller; 82 #interrupt-cells = <1>; 83 }; 84}; 85 86&lradc { 87 vref-supply = <®_vcc3v0>; 88 status = "okay"; 89 90 button@800 { 91 label = "Volume Up"; 92 linux,code = <KEY_VOLUMEUP>; 93 channel = <0>; 94 voltage = <800000>; 95 }; 96 97 button@1000 { 98 label = "Volume Down"; 99 linux,code = <KEY_VOLUMEDOWN>; 100 channel = <0>; 101 voltage = <1000000>; 102 }; 103 104 button@1200 { 105 label = "Back"; 106 linux,code = <KEY_BACK>; 107 channel = <0>; 108 voltage = <1200000>; 109 }; 110}; 111 112&mmc0 { 113 pinctrl-names = "default"; 114 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; 115 vmmc-supply = <®_vcc3v3>; 116 bus-width = <4>; 117 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ 118 cd-inverted; 119 status = "okay"; 120}; 121 122®_usb2_vbus { 123 status = "okay"; 124}; 125 126&uart0 { 127 pinctrl-names = "default"; 128 pinctrl-0 = <&uart0_pins_a>; 129 status = "okay"; 130}; 131 132&usbphy { 133 usb2_vbus-supply = <®_usb2_vbus>; 134 status = "okay"; 135}; 136