xref: /openbmc/u-boot/arch/arm/dts/sun4i-a10-ba10-tvbox.dts (revision 9038cd531382e94cc6d4daa9e81f70491030aa38) 
1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun4i-a10.dtsi"
50#include "sunxi-common-regulators.dtsi"
51
52#include <dt-bindings/gpio/gpio.h>
53
54/ {
55	model = "BA10 tvbox";
56	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
57
58	aliases {
59		serial0 = &uart0;
60	};
61
62	chosen {
63		stdout-path = "serial0:115200n8";
64	};
65};
66
67&ehci0 {
68	status = "okay";
69};
70
71&ehci1 {
72	status = "okay";
73};
74
75&emac {
76	pinctrl-names = "default";
77	pinctrl-0 = <&emac_pins_a>;
78	phy = <&phy1>;
79	status = "okay";
80};
81
82&i2c0 {
83	pinctrl-names = "default";
84	pinctrl-0 = <&i2c0_pins_a>;
85	status = "okay";
86
87	axp209: pmic@34 {
88		compatible = "x-powers,axp209";
89		reg = <0x34>;
90		interrupts = <0>;
91
92		interrupt-controller;
93		#interrupt-cells = <1>;
94	};
95};
96
97&ir0 {
98	pinctrl-names = "default";
99	pinctrl-0 = <&ir0_pins_a>;
100	status = "okay";
101};
102
103&mdio {
104	status = "okay";
105
106	phy1: ethernet-phy@1 {
107		reg = <1>;
108	};
109};
110
111&mmc0 {
112	pinctrl-names = "default";
113	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
114	vmmc-supply = <&reg_vcc3v3>;
115	bus-width = <4>;
116	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
117	cd-inverted;
118	status = "okay";
119};
120
121&ohci0 {
122	status = "okay";
123};
124
125&ohci1 {
126	status = "okay";
127};
128
129&pio {
130	usb2_vbus_pin_a: usb2_vbus_pin@0 {
131		allwinner,pins = "PH12";
132	};
133};
134
135&reg_usb1_vbus {
136	status = "okay";
137};
138
139&reg_usb2_vbus {
140	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
141	status = "okay";
142};
143
144&uart0 {
145	pinctrl-names = "default";
146	pinctrl-0 = <&uart0_pins_a>;
147	status = "okay";
148};
149
150&usbphy {
151	usb1_vbus-supply = <&reg_usb1_vbus>;
152	usb2_vbus-supply = <&reg_usb2_vbus>;
153	status = "okay";
154};
155