1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun4i-a10.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50	model = "BA10 tvbox";
51	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
52
53	aliases {
54		serial0 = &uart0;
55	};
56
57	chosen {
58		stdout-path = "serial0:115200n8";
59	};
60};
61
62&ehci0 {
63	status = "okay";
64};
65
66&ehci1 {
67	status = "okay";
68};
69
70&emac {
71	pinctrl-names = "default";
72	pinctrl-0 = <&emac_pins_a>;
73	phy = <&phy1>;
74	status = "okay";
75};
76
77&emac_sram {
78	status = "okay";
79};
80
81&i2c0 {
82	pinctrl-names = "default";
83	pinctrl-0 = <&i2c0_pins_a>;
84	status = "okay";
85
86	axp209: pmic@34 {
87		compatible = "x-powers,axp209";
88		reg = <0x34>;
89		interrupts = <0>;
90
91		interrupt-controller;
92		#interrupt-cells = <1>;
93	};
94};
95
96&ir0 {
97	pinctrl-names = "default";
98	pinctrl-0 = <&ir0_rx_pins_a>;
99	status = "okay";
100};
101
102&mdio {
103	status = "okay";
104
105	phy1: ethernet-phy@1 {
106		reg = <1>;
107	};
108};
109
110&mmc0 {
111	pinctrl-names = "default";
112	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
113	vmmc-supply = <&reg_vcc3v3>;
114	bus-width = <4>;
115	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
116	cd-inverted;
117	status = "okay";
118};
119
120&ohci0 {
121	status = "okay";
122};
123
124&ohci1 {
125	status = "okay";
126};
127
128&otg_sram {
129	status = "okay";
130};
131
132&pio {
133	usb2_vbus_pin_a: usb2_vbus_pin@0 {
134		allwinner,pins = "PH12";
135	};
136};
137
138&reg_usb0_vbus {
139	regulator-boot-on;
140	status = "okay";
141};
142
143&reg_usb1_vbus {
144	status = "okay";
145};
146
147&reg_usb2_vbus {
148	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
149	status = "okay";
150};
151
152&uart0 {
153	pinctrl-names = "default";
154	pinctrl-0 = <&uart0_pins_a>;
155	status = "okay";
156};
157
158&usb_otg {
159	dr_mode = "host";
160	status = "okay";
161};
162
163&usbphy {
164	usb0_vbus-supply = <&reg_usb0_vbus>;
165	usb1_vbus-supply = <&reg_usb1_vbus>;
166	usb2_vbus-supply = <&reg_usb2_vbus>;
167	status = "okay";
168};
169