1/* 2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun4i-a10.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48 49/ { 50 model = "BA10 tvbox"; 51 compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; 52 53 aliases { 54 serial0 = &uart0; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60}; 61 62&ehci0 { 63 status = "okay"; 64}; 65 66&ehci1 { 67 status = "okay"; 68}; 69 70&emac { 71 pinctrl-names = "default"; 72 pinctrl-0 = <&emac_pins_a>; 73 phy = <&phy1>; 74 status = "okay"; 75}; 76 77&emac_sram { 78 status = "okay"; 79}; 80 81&i2c0 { 82 pinctrl-names = "default"; 83 pinctrl-0 = <&i2c0_pins_a>; 84 status = "okay"; 85 86 axp209: pmic@34 { 87 compatible = "x-powers,axp209"; 88 reg = <0x34>; 89 interrupts = <0>; 90 91 interrupt-controller; 92 #interrupt-cells = <1>; 93 }; 94}; 95 96&ir0 { 97 pinctrl-names = "default"; 98 pinctrl-0 = <&ir0_rx_pins_a>; 99 status = "okay"; 100}; 101 102&mdio { 103 status = "okay"; 104 105 phy1: ethernet-phy@1 { 106 reg = <1>; 107 }; 108}; 109 110&mmc0 { 111 pinctrl-names = "default"; 112 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; 113 vmmc-supply = <®_vcc3v3>; 114 bus-width = <4>; 115 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ 116 cd-inverted; 117 status = "okay"; 118}; 119 120&ohci0 { 121 status = "okay"; 122}; 123 124&ohci1 { 125 status = "okay"; 126}; 127 128&pio { 129 usb2_vbus_pin_a: usb2_vbus_pin@0 { 130 allwinner,pins = "PH12"; 131 }; 132}; 133 134®_usb1_vbus { 135 status = "okay"; 136}; 137 138®_usb2_vbus { 139 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; 140 status = "okay"; 141}; 142 143&uart0 { 144 pinctrl-names = "default"; 145 pinctrl-0 = <&uart0_pins_a>; 146 status = "okay"; 147}; 148 149&usbphy { 150 usb1_vbus-supply = <®_usb1_vbus>; 151 usb2_vbus-supply = <®_usb2_vbus>; 152 status = "okay"; 153}; 154