1/* 2 * Copyright 2016 - Michael Kurz <michi.kurz@gmail.com> 3 * Copyright 2016 - Vikas MANOCHA <vikas.manocha@st.com> 4 * 5 * Based on: 6 * stm32f429.dtsi from Linux 7 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> 8 * 9 * This file is dual-licensed: you can use it either under the terms 10 * of the GPL or the X11 license, at your option. Note that this dual 11 * licensing only applies to this file, and not this project as a 12 * whole. 13 * 14 * a) This file is free software; you can redistribute it and/or 15 * modify it under the terms of the GNU General Public License as 16 * published by the Free Software Foundation; either version 2 of the 17 * License, or (at your option) any later version. 18 * 19 * This file is distributed in the hope that it will be useful, 20 * but WITHOUT ANY WARRANTY; without even the implied warranty of 21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 * GNU General Public License for more details. 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48#include "armv7-m.dtsi" 49#include <dt-bindings/pinctrl/stm32f746-pinfunc.h> 50 51/ { 52 clocks { 53 clk_hse: clk-hse { 54 #clock-cells = <0>; 55 compatible = "fixed-clock"; 56 clock-frequency = <0>; 57 }; 58}; 59 60 soc { 61 u-boot,dm-pre-reloc; 62 mac: ethernet@40028000 { 63 compatible = "st,stm32-dwmac"; 64 reg = <0x40028000 0x8000>; 65 reg-names = "stmmaceth"; 66 interrupts = <61>, <62>; 67 interrupt-names = "macirq", "eth_wake_irq"; 68 snps,pbl = <8>; 69 snps,mixed-burst; 70 dma-ranges; 71 status = "disabled"; 72 }; 73 74 fmc: fmc@A0000000 { 75 compatible = "st,stm32-fmc"; 76 reg = <0xA0000000 0x1000>; 77 clocks = <&rcc 0 64>; 78 u-boot,dm-pre-reloc; 79 }; 80 81 qspi: quadspi@A0001000 { 82 compatible = "st,stm32-qspi"; 83 #address-cells = <1>; 84 #size-cells = <0>; 85 reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>; 86 reg-names = "QuadSPI", "QuadSPI-memory"; 87 interrupts = <92>; 88 spi-max-frequency = <108000000>; 89 clocks = <&rcc 0 65>; 90 status = "disabled"; 91 }; 92 usart1: serial@40011000 { 93 compatible = "st,stm32-usart", "st,stm32-uart"; 94 reg = <0x40011000 0x400>; 95 interrupts = <37>; 96 clocks = <&rcc 0 164>; 97 status = "disabled"; 98 u-boot,dm-pre-reloc; 99 }; 100 rcc: rcc@40023810 { 101 #reset-cells = <1>; 102 #clock-cells = <2>; 103 compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; 104 reg = <0x40023800 0x400>; 105 clocks = <&clk_hse>; 106 u-boot,dm-pre-reloc; 107 }; 108 109 pinctrl: pin-controller { 110 #address-cells = <1>; 111 #size-cells = <1>; 112 compatible = "st,stm32f746-pinctrl"; 113 ranges = <0 0x40020000 0x3000>; 114 u-boot,dm-pre-reloc; 115 pins-are-numbered; 116 117 gpioa: gpio@40020000 { 118 gpio-controller; 119 #gpio-cells = <2>; 120 compatible = "st,stm32-gpio"; 121 reg = <0x0 0x400>; 122 clocks = <&rcc 0 0>; 123 st,bank-name = "GPIOA"; 124 u-boot,dm-pre-reloc; 125 }; 126 127 gpiob: gpio@40020400 { 128 gpio-controller; 129 #gpio-cells = <2>; 130 compatible = "st,stm32-gpio"; 131 reg = <0x400 0x400>; 132 clocks = <&rcc 0 1>; 133 st,bank-name = "GPIOB"; 134 u-boot,dm-pre-reloc; 135 }; 136 137 138 gpioc: gpio@40020800 { 139 gpio-controller; 140 #gpio-cells = <2>; 141 compatible = "st,stm32-gpio"; 142 reg = <0x800 0x400>; 143 clocks = <&rcc 0 2>; 144 st,bank-name = "GPIOC"; 145 u-boot,dm-pre-reloc; 146 }; 147 148 gpiod: gpio@40020c00 { 149 gpio-controller; 150 #gpio-cells = <2>; 151 compatible = "st,stm32-gpio"; 152 reg = <0xc00 0x400>; 153 clocks = <&rcc 0 3>; 154 st,bank-name = "GPIOD"; 155 u-boot,dm-pre-reloc; 156 }; 157 158 gpioe: gpio@40021000 { 159 gpio-controller; 160 #gpio-cells = <2>; 161 compatible = "st,stm32-gpio"; 162 reg = <0x1000 0x400>; 163 clocks = <&rcc 0 4>; 164 st,bank-name = "GPIOE"; 165 u-boot,dm-pre-reloc; 166 }; 167 168 gpiof: gpio@40021400 { 169 gpio-controller; 170 #gpio-cells = <2>; 171 compatible = "st,stm32-gpio"; 172 reg = <0x1400 0x400>; 173 clocks = <&rcc 0 5>; 174 st,bank-name = "GPIOF"; 175 u-boot,dm-pre-reloc; 176 }; 177 178 gpiog: gpio@40021800 { 179 gpio-controller; 180 #gpio-cells = <2>; 181 compatible = "st,stm32-gpio"; 182 reg = <0x1800 0x400>; 183 clocks = <&rcc 0 6>; 184 st,bank-name = "GPIOG"; 185 u-boot,dm-pre-reloc; 186 }; 187 188 gpioh: gpio@40021c00 { 189 gpio-controller; 190 #gpio-cells = <2>; 191 compatible = "st,stm32-gpio"; 192 reg = <0x1c00 0x400>; 193 clocks = <&rcc 0 7>; 194 st,bank-name = "GPIOH"; 195 u-boot,dm-pre-reloc; 196 }; 197 198 gpioi: gpio@40022000 { 199 gpio-controller; 200 #gpio-cells = <2>; 201 compatible = "st,stm32-gpio"; 202 reg = <0x2000 0x400>; 203 clocks = <&rcc 0 8>; 204 st,bank-name = "GPIOI"; 205 u-boot,dm-pre-reloc; 206 }; 207 208 gpioj: gpio@40022400 { 209 gpio-controller; 210 #gpio-cells = <2>; 211 compatible = "st,stm32-gpio"; 212 reg = <0x2400 0x400>; 213 clocks = <&rcc 0 9>; 214 st,bank-name = "GPIOJ"; 215 u-boot,dm-pre-reloc; 216 }; 217 218 gpiok: gpio@40022800 { 219 gpio-controller; 220 #gpio-cells = <2>; 221 compatible = "st,stm32-gpio"; 222 reg = <0x2800 0x400>; 223 clocks = <&rcc 0 10>; 224 st,bank-name = "GPIOK"; 225 u-boot,dm-pre-reloc; 226 }; 227 228 }; 229 }; 230}; 231 232&systick { 233 status = "okay"; 234}; 235