1/*
2 *  Copyright (C) 2012 Altera Corporation <www.altera.com>
3 *
4 * SPDX-License-Identifier:	GPL-2.0+
5 */
6
7#include "socfpga_cyclone5.dtsi"
8
9/ {
10	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
11	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
12
13	chosen {
14		bootargs = "console=ttyS0,115200";
15	};
16
17	memory {
18		name = "memory";
19		device_type = "memory";
20		reg = <0x0 0x40000000>; /* 1GB */
21	};
22
23	aliases {
24		/* this allow the ethaddr uboot environment variable contents
25		 * to be added to the gmac1 device tree blob.
26		 */
27		ethernet0 = &gmac1;
28		udc0 = &usb1;
29	};
30
31	regulator_3_3v: 3-3-v-regulator {
32		compatible = "regulator-fixed";
33		regulator-name = "3.3V";
34		regulator-min-microvolt = <3300000>;
35		regulator-max-microvolt = <3300000>;
36	};
37
38	soc {
39		u-boot,dm-pre-reloc;
40	};
41};
42
43&gmac1 {
44	status = "okay";
45	phy-mode = "rgmii";
46
47	rxd0-skew-ps = <0>;
48	rxd1-skew-ps = <0>;
49	rxd2-skew-ps = <0>;
50	rxd3-skew-ps = <0>;
51	txen-skew-ps = <0>;
52	txc-skew-ps = <2600>;
53	rxdv-skew-ps = <0>;
54	rxc-skew-ps = <2000>;
55};
56
57&gpio1 {
58	status = "okay";
59};
60
61&i2c0 {
62	status = "okay";
63
64	eeprom@51 {
65		compatible = "atmel,24c32";
66		reg = <0x51>;
67		pagesize = <32>;
68	};
69
70	rtc@68 {
71		compatible = "dallas,ds1339";
72		reg = <0x68>;
73	};
74};
75
76&mmc0 {
77	status = "okay";
78	u-boot,dm-pre-reloc;
79
80	cd-gpios = <&portb 18 0>;
81	vmmc-supply = <&regulator_3_3v>;
82	vqmmc-supply = <&regulator_3_3v>;
83};
84
85&qspi {
86	status = "okay";
87	u-boot,dm-pre-reloc;
88
89	flash0: n25q00@0 {
90		u-boot,dm-pre-reloc;
91		#address-cells = <1>;
92		#size-cells = <1>;
93		compatible = "n25q00";
94		reg = <0>;      /* chip select */
95		spi-max-frequency = <100000000>;
96		m25p,fast-read;
97		page-size = <256>;
98		block-size = <16>; /* 2^16, 64KB */
99		read-delay = <4>;  /* delay value in read data capture register */
100		tshsl-ns = <50>;
101		tsd2d-ns = <50>;
102		tchsh-ns = <4>;
103		tslch-ns = <4>;
104	};
105};
106
107&usb1 {
108	status = "okay";
109};
110