1/* 2 * Copyright (c) 2017 Rockchip Electronics Co., Ltd 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "rk3368.dtsi" 45#include <dt-bindings/input/input.h> 46 47/ { 48 model = "PX5 EVB"; 49 compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; 50 51 chosen { 52 stdout-path = "serial4:115200n8"; 53 }; 54 55 memory@0 { 56 device_type = "memory"; 57 reg = <0x0 0x0 0x0 0x40000000>; 58 }; 59 60 ext_gmac: gmac-clk { 61 compatible = "fixed-clock"; 62 clock-frequency = <125000000>; 63 clock-output-names = "ext_gmac"; 64 #clock-cells = <0>; 65 }; 66 67 ir: ir-receiver { 68 compatible = "gpio-ir-receiver"; 69 gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; 70 pinctrl-names = "default"; 71 pinctrl-0 = <&ir_int>; 72 }; 73 74 keys: gpio-keys { 75 compatible = "gpio-keys"; 76 pinctrl-names = "default"; 77 pinctrl-0 = <&pwr_key>; 78 79 power { 80 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; 81 label = "GPIO Power"; 82 linux,code = <KEY_POWER>; 83 wakeup-source; 84 }; 85 }; 86 87 leds: gpio-leds { 88 compatible = "gpio-leds"; 89 90 blue { 91 gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; 92 label = "geekbox:blue:led"; 93 default-state = "on"; 94 }; 95 96 red { 97 gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; 98 label = "geekbox:red:led"; 99 default-state = "off"; 100 }; 101 }; 102 103 vcc_sys: vcc-sys-regulator { 104 compatible = "regulator-fixed"; 105 regulator-name = "vcc_sys"; 106 regulator-min-microvolt = <5000000>; 107 regulator-max-microvolt = <5000000>; 108 regulator-always-on; 109 regulator-boot-on; 110 }; 111}; 112 113&emmc { 114 status = "okay"; 115 bus-width = <8>; 116 cap-mmc-highspeed; 117 clock-frequency = <150000000>; 118 disable-wp; 119 keep-power-in-suspend; 120 non-removable; 121 num-slots = <1>; 122 vmmc-supply = <&vcc_io>; 123 vqmmc-supply = <&vcc18_flash>; 124 pinctrl-names = "default"; 125 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; 126}; 127 128&gmac { 129 status = "okay"; 130 phy-supply = <&vcc_lan>; 131 phy-mode = "rgmii"; 132 clock_in_out = "input"; 133 assigned-clocks = <&cru SCLK_MAC>; 134 assigned-clock-parents = <&ext_gmac>; 135 pinctrl-names = "default"; 136 pinctrl-0 = <&rgmii_pins>; 137 tx_delay = <0x30>; 138 rx_delay = <0x10>; 139}; 140 141&i2c0 { 142 status = "okay"; 143 144 rk808: pmic@1b { 145 compatible = "rockchip,rk808"; 146 reg = <0x1b>; 147 pinctrl-names = "default"; 148 pinctrl-0 = <&pmic_int>, <&pmic_sleep>; 149 interrupt-parent = <&gpio0>; 150 interrupts = <5 IRQ_TYPE_LEVEL_LOW>; 151 rockchip,system-power-controller; 152 vcc1-supply = <&vcc_sys>; 153 vcc2-supply = <&vcc_sys>; 154 vcc3-supply = <&vcc_sys>; 155 vcc4-supply = <&vcc_sys>; 156 vcc6-supply = <&vcc_sys>; 157 vcc7-supply = <&vcc_sys>; 158 vcc8-supply = <&vcc_io>; 159 vcc9-supply = <&vcc_sys>; 160 vcc10-supply = <&vcc_sys>; 161 vcc11-supply = <&vcc_sys>; 162 vcc12-supply = <&vcc_io>; 163 clock-output-names = "xin32k", "rk808-clkout2"; 164 #clock-cells = <1>; 165 166 regulators { 167 vdd_cpu: DCDC_REG1 { 168 regulator-always-on; 169 regulator-boot-on; 170 regulator-min-microvolt = <700000>; 171 regulator-max-microvolt = <1500000>; 172 regulator-name = "vdd_cpu"; 173 }; 174 175 vdd_log: DCDC_REG2 { 176 regulator-always-on; 177 regulator-boot-on; 178 regulator-min-microvolt = <700000>; 179 regulator-max-microvolt = <1500000>; 180 regulator-name = "vdd_log"; 181 }; 182 183 vcc_ddr: DCDC_REG3 { 184 regulator-always-on; 185 regulator-boot-on; 186 regulator-name = "vcc_ddr"; 187 }; 188 189 vcc_io: DCDC_REG4 { 190 regulator-always-on; 191 regulator-boot-on; 192 regulator-min-microvolt = <3300000>; 193 regulator-max-microvolt = <3300000>; 194 regulator-name = "vcc_io"; 195 }; 196 197 vcc18_flash: LDO_REG1 { 198 regulator-always-on; 199 regulator-boot-on; 200 regulator-min-microvolt = <1800000>; 201 regulator-max-microvolt = <1800000>; 202 regulator-name = "vcc18_flash"; 203 }; 204 205 vcc33_lcd: LDO_REG2 { 206 regulator-always-on; 207 regulator-boot-on; 208 regulator-min-microvolt = <3300000>; 209 regulator-max-microvolt = <3300000>; 210 regulator-name = "vcc33_lcd"; 211 }; 212 213 vdd_10: LDO_REG3 { 214 regulator-always-on; 215 regulator-boot-on; 216 regulator-min-microvolt = <1000000>; 217 regulator-max-microvolt = <1000000>; 218 regulator-name = "vdd_10"; 219 }; 220 221 vcca_18: LDO_REG4 { 222 regulator-boot-on; 223 regulator-min-microvolt = <1800000>; 224 regulator-max-microvolt = <1800000>; 225 regulator-name = "vcca_18"; 226 }; 227 228 vccio_sd: LDO_REG5 { 229 regulator-always-on; 230 regulator-boot-on; 231 regulator-min-microvolt = <1800000>; 232 regulator-max-microvolt = <3300000>; 233 regulator-name = "vccio_sd"; 234 }; 235 236 vdd10_lcd: LDO_REG6 { 237 regulator-always-on; 238 regulator-boot-on; 239 regulator-min-microvolt = <1000000>; 240 regulator-max-microvolt = <1000000>; 241 regulator-name = "vdd10_lcd"; 242 }; 243 244 vcc_18: LDO_REG7 { 245 regulator-always-on; 246 regulator-boot-on; 247 regulator-min-microvolt = <1800000>; 248 regulator-max-microvolt = <1800000>; 249 regulator-name = "vcc_18"; 250 }; 251 252 vcc18_lcd: LDO_REG8 { 253 regulator-always-on; 254 regulator-boot-on; 255 regulator-min-microvolt = <1800000>; 256 regulator-max-microvolt = <1800000>; 257 regulator-name = "vcc18_lcd"; 258 }; 259 260 vcc_sd: SWITCH_REG1 { 261 regulator-always-on; 262 regulator-boot-on; 263 regulator-name = "vcc_sd"; 264 }; 265 266 vcc_lan: SWITCH_REG2 { 267 regulator-always-on; 268 regulator-boot-on; 269 regulator-name = "vcc_lan"; 270 }; 271 }; 272 }; 273}; 274 275&pinctrl { 276 ir { 277 ir_int: ir-int { 278 rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; 279 }; 280 }; 281 282 keys { 283 pwr_key: pwr-key { 284 rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; 285 }; 286 }; 287 288 pmic { 289 pmic_sleep: pmic-sleep { 290 rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; 291 }; 292 293 pmic_int: pmic-int { 294 rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; 295 }; 296 }; 297}; 298 299&tsadc { 300 status = "okay"; 301 rockchip,hw-tshut-mode = <0>; /* CRU */ 302 rockchip,hw-tshut-polarity = <1>; /* high */ 303}; 304 305&uart4 { 306 status = "okay"; 307}; 308 309&usb_host0_ehci { 310 status = "okay"; 311}; 312 313&usb_otg { 314 status = "okay"; 315}; 316 317&wdt { 318 status = "okay"; 319}; 320