1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Google Veyron (and derivatives) board device tree source 4 * 5 * Copyright 2014 Google, Inc 6 */ 7 8#include <dt-bindings/clock/rockchip,rk808.h> 9#include <dt-bindings/input/input.h> 10#include "rk3288.dtsi" 11 12/ { 13 memory { 14 reg = <0x0 0x80000000>; 15 }; 16 17 chosen { 18 stdout-path = &uart2; 19 }; 20 21 config { 22 u-boot,dm-pre-reloc; 23 u-boot,boot0 = &spi_flash; 24 }; 25 26 firmware { 27 chromeos { 28 pinctrl-names = "default"; 29 pinctrl-0 = <&fw_wp_ap>; 30 write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>; 31 }; 32 }; 33 34 backlight: backlight { 35 compatible = "pwm-backlight"; 36 brightness-levels = < 37 0 1 2 3 4 5 6 7 38 8 9 10 11 12 13 14 15 39 16 17 18 19 20 21 22 23 40 24 25 26 27 28 29 30 31 41 32 33 34 35 36 37 38 39 42 40 41 42 43 44 45 46 47 43 48 49 50 51 52 53 54 55 44 56 57 58 59 60 61 62 63 45 64 65 66 67 68 69 70 71 46 72 73 74 75 76 77 78 79 47 80 81 82 83 84 85 86 87 48 88 89 90 91 92 93 94 95 49 96 97 98 99 100 101 102 103 50 104 105 106 107 108 109 110 111 51 112 113 114 115 116 117 118 119 52 120 121 122 123 124 125 126 127 53 128 129 130 131 132 133 134 135 54 136 137 138 139 140 141 142 143 55 144 145 146 147 148 149 150 151 56 152 153 154 155 156 157 158 159 57 160 161 162 163 164 165 166 167 58 168 169 170 171 172 173 174 175 59 176 177 178 179 180 181 182 183 60 184 185 186 187 188 189 190 191 61 192 193 194 195 196 197 198 199 62 200 201 202 203 204 205 206 207 63 208 209 210 211 212 213 214 215 64 216 217 218 219 220 221 222 223 65 224 225 226 227 228 229 230 231 66 232 233 234 235 236 237 238 239 67 240 241 242 243 244 245 246 247 68 248 249 250 251 252 253 254 255>; 69 default-brightness-level = <128>; 70 enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; 71 backlight-boot-off; 72 pinctrl-names = "default"; 73 pinctrl-0 = <&bl_en>; 74 pwms = <&pwm0 0 1000000 0>; 75 }; 76 77 panel: panel { 78 compatible ="cnm,n116bgeea2","simple-panel"; 79 status = "okay"; 80 power-supply = <&vcc33_lcd>; 81 backlight = <&backlight>; 82 }; 83 84 gpio_keys: gpio-keys { 85 compatible = "gpio-keys"; 86 #address-cells = <1>; 87 #size-cells = <0>; 88 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pwr_key_h>; 91 power { 92 label = "Power"; 93 gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; 94 linux,code = <KEY_POWER>; 95 debounce-interval = <100>; 96 gpio-key,wakeup; 97 }; 98 }; 99 100 gpio-restart { 101 compatible = "gpio-restart"; 102 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; 103 pinctrl-names = "default"; 104 pinctrl-0 = <&ap_warm_reset_h>; 105 priority = /bits/ 8 <200>; 106 }; 107 108 emmc_pwrseq: emmc-pwrseq { 109 compatible = "mmc-pwrseq-emmc"; 110 pinctrl-0 = <&emmc_reset>; 111 pinctrl-names = "default"; 112 reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; 113 }; 114 115 sound { 116 compatible = "rockchip,rockchip-audio-max98090"; 117 rockchip,model = "ROCKCHIP-I2S"; 118 rockchip,i2s-controller = <&i2s>; 119 rockchip,audio-codec = <&max98090>; 120 rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; 121 rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; 122 rockchip,headset-codec = <&headsetcodec>; 123 pinctrl-names = "default"; 124 pinctrl-0 = <&mic_det>, <&hp_det>; 125 }; 126 127 vdd_logic: pwm-regulator { 128 compatible = "pwm-regulator"; 129 pwms = <&pwm1 0 2000 0>; 130 131 voltage-table = <1350000 0>, 132 <1300000 10>, 133 <1250000 20>, 134 <1200000 31>, 135 <1150000 41>, 136 <1100000 52>, 137 <1050000 62>, 138 <1000000 72>, 139 < 950000 83>; 140 141 regulator-min-microvolt = <950000>; 142 regulator-max-microvolt = <1350000>; 143 regulator-name = "vdd_logic"; 144 regulator-ramp-delay = <4000>; 145 }; 146 147 vcc33_sys: vcc33-sys { 148 compatible = "regulator-fixed"; 149 regulator-name = "vcc33_sys"; 150 regulator-always-on; 151 regulator-boot-on; 152 regulator-min-microvolt = <3300000>; 153 regulator-max-microvolt = <3300000>; 154 vin-supply = <&vccsys>; 155 }; 156 157 vcc_5v: vcc-5v { 158 compatible = "regulator-fixed"; 159 regulator-name = "vcc_5v"; 160 regulator-always-on; 161 regulator-boot-on; 162 regulator-min-microvolt = <5000000>; 163 regulator-max-microvolt = <5000000>; 164 }; 165 166 vcc50_hdmi: vcc50-hdmi { 167 compatible = "regulator-fixed"; 168 regulator-name = "vcc50_hdmi"; 169 regulator-always-on; 170 regulator-boot-on; 171 vin-supply = <&vcc_5v>; 172 }; 173 174 bt_regulator: bt-regulator { 175 /* 176 * On the module itself this is one of these (depending 177 * on the actual card pouplated): 178 * - BT_I2S_WS_BT_RFDISABLE_L 179 * - No connect 180 */ 181 182 compatible = "regulator-fixed"; 183 enable-active-high; 184 gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; 185 pinctrl-names = "default"; 186 pinctrl-0 = <&bt_enable_l>; 187 regulator-name = "bt_regulator"; 188 }; 189 190 wifi_regulator: wifi-regulator { 191 /* 192 * On the module itself this is one of these (depending 193 * on the actual card populated): 194 * - SDIO_RESET_L_WL_REG_ON 195 * - PDN (power down when low) 196 */ 197 198 compatible = "regulator-fixed"; 199 enable-active-high; 200 gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; 201 pinctrl-names = "default"; 202 pinctrl-0 = <&wifi_enable_h>; 203 regulator-name = "wifi_regulator"; 204 205 /* Faux input supply. See bt_regulator description. */ 206 vin-supply = <&bt_regulator>; 207 }; 208 209 io-domains { 210 compatible = "rockchip,rk3288-io-voltage-domain"; 211 rockchip,grf = <&grf>; 212 213 audio-supply = <&vcc18_codec>; 214 bb-supply = <&vcc33_io>; 215 dvp-supply = <&vcc_18>; 216 flash0-supply = <&vcc18_flashio>; 217 gpio1830-supply = <&vcc33_io>; 218 gpio30-supply = <&vcc33_io>; 219 lcdc-supply = <&vcc33_lcd>; 220 sdcard-supply = <&vccio_sd>; 221 wifi-supply = <&vcc18_wl>; 222 }; 223}; 224 225&cpu0 { 226 cpu0-supply = <&vdd_cpu>; 227}; 228 229&dmc { 230 logic-supply = <&vdd_logic>; 231 rockchip,odt-disable-freq = <333000000>; 232 rockchip,dll-disable-freq = <333000000>; 233 rockchip,sr-enable-freq = <333000000>; 234 rockchip,pd-enable-freq = <666000000>; 235 rockchip,auto-self-refresh-cnt = <0>; 236 rockchip,auto-power-down-cnt = <64>; 237 rockchip,ddr-speed-bin = <21>; 238 rockchip,trcd = <10>; 239 rockchip,trp = <10>; 240 operating-points = < 241 /* KHz uV */ 242 200000 1050000 243 333000 1100000 244 533000 1150000 245 666000 1200000 246 >; 247}; 248 249&efuse { 250 status = "okay"; 251}; 252 253&emmc { 254 broken-cd; 255 bus-width = <8>; 256 cap-mmc-highspeed; 257 mmc-hs200-1_8v; 258 mmc-pwrseq = <&emmc_pwrseq>; 259 disable-wp; 260 non-removable; 261 num-slots = <1>; 262 pinctrl-names = "default"; 263 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>; 264 status = "okay"; 265}; 266 267&sdio0 { 268 broken-cd; 269 bus-width = <4>; 270 cap-sd-highspeed; 271 sd-uhs-sdr12; 272 sd-uhs-sdr25; 273 sd-uhs-sdr50; 274 sd-uhs-sdr104; 275 cap-sdio-irq; 276 card-external-vcc-supply = <&wifi_regulator>; 277 clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, 278 <&cru SCLK_SDIO0_SAMPLE>, <&rk808 RK808_CLKOUT1>; 279 clock-names = "biu", "ciu", "ciu_drv", "ciu_sample", "card_ext_clock"; 280 keep-power-in-suspend; 281 non-removable; 282 num-slots = <1>; 283 pinctrl-names = "default"; 284 pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; 285 status = "okay"; 286 vmmc-supply = <&vcc33_sys>; 287 vqmmc-supply = <&vcc18_wl>; 288}; 289 290&sdmmc { 291 bus-width = <4>; 292 cap-mmc-highspeed; 293 cap-sd-highspeed; 294 sd-uhs-sdr12; 295 sd-uhs-sdr25; 296 sd-uhs-sdr50; 297 sd-uhs-sdr104; 298 card-detect-delay = <200>; 299 cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; 300 num-slots = <1>; 301 status = "okay"; 302 vmmc-supply = <&vcc33_sd>; 303 vqmmc-supply = <&vccio_sd>; 304}; 305 306&spi2 { 307 status = "okay"; 308 u-boot,dm-pre-reloc; 309 310 spi_flash: spiflash@0 { 311 u-boot,dm-pre-reloc; 312 compatible = "spidev", "spi-flash"; 313 spi-max-frequency = <20000000>; /* Reduce for Dediprog em100 pro */ 314 reg = <0>; 315 }; 316}; 317 318&i2c0 { 319 status = "okay"; 320 321 clock-frequency = <400000>; 322 i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ 323 i2c-scl-rising-time-ns = <100>; /* 45ns measured */ 324 u-boot,dm-pre-reloc; 325 326 rk808: pmic@1b { 327 compatible = "rockchip,rk808"; 328 clock-output-names = "xin32k", "wifibt_32kin"; 329 interrupt-parent = <&gpio0>; 330 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 331 pinctrl-names = "default"; 332 pinctrl-0 = <&pmic_int_l>; 333 reg = <0x1b>; 334 rockchip,system-power-controller; 335 wakeup-source; 336 #clock-cells = <1>; 337 u-boot,dm-pre-reloc; 338 339 vcc1-supply = <&vcc33_sys>; 340 vcc2-supply = <&vcc33_sys>; 341 vcc3-supply = <&vcc33_sys>; 342 vcc4-supply = <&vcc33_sys>; 343 vcc6-supply = <&vcc_5v>; 344 vcc7-supply = <&vcc33_sys>; 345 vcc8-supply = <&vcc33_sys>; 346 vcc9-supply = <&vcc_5v>; 347 vcc10-supply = <&vcc33_sys>; 348 vcc11-supply = <&vcc_5v>; 349 vcc12-supply = <&vcc_18>; 350 351 vddio-supply = <&vcc33_io>; 352 353 regulators { 354 vdd_cpu: DCDC_REG1 { 355 regulator-always-on; 356 regulator-boot-on; 357 regulator-min-microvolt = <750000>; 358 regulator-max-microvolt = <1450000>; 359 regulator-name = "vdd_arm"; 360 regulator-ramp-delay = <6001>; 361 regulator-suspend-mem-disabled; 362 }; 363 364 vdd_gpu: DCDC_REG2 { 365 regulator-always-on; 366 regulator-boot-on; 367 regulator-min-microvolt = <800000>; 368 regulator-max-microvolt = <1250000>; 369 regulator-name = "vdd_gpu"; 370 regulator-ramp-delay = <6001>; 371 regulator-suspend-mem-disabled; 372 }; 373 374 vcc135_ddr: DCDC_REG3 { 375 regulator-always-on; 376 regulator-boot-on; 377 regulator-name = "vcc135_ddr"; 378 regulator-suspend-mem-enabled; 379 }; 380 381 /* 382 * vcc_18 has several aliases. (vcc18_flashio and 383 * vcc18_wl). We'll add those aliases here just to 384 * make it easier to follow the schematic. The signals 385 * are actually hooked together and only separated for 386 * power measurement purposes). 387 */ 388 vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 { 389 regulator-always-on; 390 regulator-boot-on; 391 regulator-min-microvolt = <1800000>; 392 regulator-max-microvolt = <1800000>; 393 regulator-name = "vcc_18"; 394 regulator-suspend-mem-microvolt = <1800000>; 395 }; 396 397 /* 398 * Note that both vcc33_io and vcc33_pmuio are always 399 * powered together. To simplify the logic in the dts 400 * we just refer to vcc33_io every time something is 401 * powered from vcc33_pmuio. In fact, on later boards 402 * (such as danger) they're the same net. 403 */ 404 vcc33_io: LDO_REG1 { 405 regulator-always-on; 406 regulator-boot-on; 407 regulator-min-microvolt = <3300000>; 408 regulator-max-microvolt = <3300000>; 409 regulator-name = "vcc33_io"; 410 regulator-suspend-mem-microvolt = <3300000>; 411 }; 412 413 vdd_10: LDO_REG3 { 414 regulator-always-on; 415 regulator-boot-on; 416 regulator-min-microvolt = <1000000>; 417 regulator-max-microvolt = <1000000>; 418 regulator-name = "vdd_10"; 419 regulator-suspend-mem-microvolt = <1000000>; 420 }; 421 422 vccio_sd: LDO_REG4 { 423 regulator-min-microvolt = <1800000>; 424 regulator-max-microvolt = <3300000>; 425 regulator-name = "vccio_sd"; 426 regulator-suspend-mem-disabled; 427 }; 428 429 vcc33_sd: LDO_REG5 { 430 regulator-min-microvolt = <3300000>; 431 regulator-max-microvolt = <3300000>; 432 regulator-name = "vcc33_sd"; 433 regulator-suspend-mem-disabled; 434 }; 435 436 vcc18_codec: LDO_REG6 { 437 regulator-always-on; 438 regulator-boot-on; 439 regulator-min-microvolt = <1800000>; 440 regulator-max-microvolt = <1800000>; 441 regulator-name = "vcc18_codec"; 442 regulator-suspend-mem-disabled; 443 }; 444 445 vdd10_lcd_pwren_h: LDO_REG7 { 446 regulator-always-on; 447 regulator-boot-on; 448 regulator-min-microvolt = <2500000>; 449 regulator-max-microvolt = <2500000>; 450 regulator-name = "vdd10_lcd_pwren_h"; 451 regulator-suspend-mem-disabled; 452 }; 453 454 vcc33_lcd: SWITCH_REG1 { 455 regulator-always-on; 456 regulator-boot-on; 457 regulator-name = "vcc33_lcd"; 458 regulator-suspend-mem-disabled; 459 }; 460 }; 461 }; 462}; 463 464&i2c1 { 465 status = "okay"; 466 467 clock-frequency = <400000>; 468 i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ 469 i2c-scl-rising-time-ns = <100>; /* 40ns measured */ 470 471 tpm: tpm@20 { 472 compatible = "infineon,slb9645tt"; 473 reg = <0x20>; 474 powered-while-suspended; 475 }; 476}; 477 478&i2c2 { 479 status = "okay"; 480 481 /* 100kHz since 4.7k resistors don't rise fast enough */ 482 clock-frequency = <100000>; 483 i2c-scl-falling-time-ns = <50>; /* 10ns measured */ 484 i2c-scl-rising-time-ns = <800>; /* 600ns measured */ 485 486 max98090: max98090@10 { 487 compatible = "maxim,max98090"; 488 reg = <0x10>; 489 interrupt-parent = <&gpio6>; 490 interrupts = <7 IRQ_TYPE_EDGE_FALLING>; 491 pinctrl-names = "default"; 492 pinctrl-0 = <&int_codec>; 493 }; 494}; 495 496&i2c3 { 497 status = "okay"; 498 499 clock-frequency = <400000>; 500 i2c-scl-falling-time-ns = <50>; 501 i2c-scl-rising-time-ns = <300>; 502}; 503 504&i2c4 { 505 status = "okay"; 506 507 clock-frequency = <400000>; 508 i2c-scl-falling-time-ns = <50>; /* 11ns measured */ 509 i2c-scl-rising-time-ns = <300>; /* 225ns measured */ 510 511 headsetcodec: ts3a227e@3b { 512 compatible = "ti,ts3a227e"; 513 reg = <0x3b>; 514 interrupt-parent = <&gpio0>; 515 interrupts = <3 IRQ_TYPE_LEVEL_LOW>; 516 pinctrl-names = "default"; 517 pinctrl-0 = <&ts3a227e_int_l>; 518 ti,micbias = <7>; /* MICBIAS = 2.8V */ 519 }; 520}; 521 522&i2c5 { 523 status = "okay"; 524 525 clock-frequency = <100000>; 526 i2c-scl-falling-time-ns = <300>; 527 i2c-scl-rising-time-ns = <1000>; 528}; 529 530&i2s { 531 status = "okay"; 532 clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; 533 clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; 534}; 535 536&wdt { 537 status = "okay"; 538}; 539 540&pwm0 { 541 status = "okay"; 542}; 543 544&pwm1 { 545 status = "okay"; 546}; 547 548&uart0 { 549 status = "okay"; 550 551 /* Pins don't include flow control by default; add that in */ 552 pinctrl-names = "default"; 553 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; 554 /* We need to go faster than 24MHz, so adjust clock parents / rates */ 555 assigned-clocks = <&cru SCLK_UART0>; 556 assigned-clock-rates = <48000000>; 557}; 558 559&uart1 { 560 status = "okay"; 561}; 562 563&uart2 { 564 status = "okay"; 565 u-boot,dm-pre-reloc; 566 reg-shift = <2>; 567}; 568 569&vopb { 570 status = "okay"; 571}; 572 573&vopb_mmu { 574 status = "okay"; 575}; 576 577&vopl { 578 status = "okay"; 579}; 580 581&vopl_mmu { 582 status = "okay"; 583}; 584 585&edp { 586 status = "okay"; 587 rockchip,panel = <&panel>; 588}; 589 590&hdmi { 591 status = "okay"; 592}; 593 594&hdmi_audio { 595 status = "okay"; 596}; 597 598&gpu { 599 status = "okay"; 600}; 601 602&tsadc { 603 tsadc-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ 604 tsadc-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ 605 status = "okay"; 606}; 607 608&pinctrl { 609 u-boot,dm-pre-reloc; 610 pinctrl-names = "default", "sleep"; 611 pinctrl-0 = < 612 /* Common for sleep and wake, but no owners */ 613 &ddr0_retention 614 &ddrio_pwroff 615 &global_pwroff 616 617 /* Wake only */ 618 &bt_dev_wake_awake 619 >; 620 pinctrl-1 = < 621 /* Common for sleep and wake, but no owners */ 622 &ddr0_retention 623 &ddrio_pwroff 624 &global_pwroff 625 626 /* Sleep only */ 627 &bt_dev_wake_sleep 628 >; 629 630 /* Add this for sdmmc pins to SD card */ 631 pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { 632 drive-strength = <8>; 633 }; 634 635 pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { 636 bias-pull-up; 637 drive-strength = <8>; 638 }; 639 640 pcfg_output_high: pcfg-output-high { 641 output-high; 642 }; 643 644 pcfg_output_low: pcfg-output-low { 645 output-low; 646 }; 647 648 backlight { 649 bl_en: bl-en { 650 rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; 651 }; 652 }; 653 654 buttons { 655 pwr_key_h: pwr-key-h { 656 rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>; 657 }; 658 }; 659 660 codec { 661 hp_det: hp-det { 662 rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; 663 }; 664 int_codec: int-codec { 665 rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_up>; 666 }; 667 mic_det: mic-det { 668 rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; 669 }; 670 }; 671 672 emmc { 673 emmc_reset: emmc-reset { 674 rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; 675 }; 676 677 /* 678 * We run eMMC at max speed; bump up drive strength. 679 * We also have external pulls, so disable the internal ones. 680 */ 681 emmc_clk: emmc-clk { 682 rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; 683 }; 684 685 emmc_cmd: emmc-cmd { 686 rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; 687 }; 688 689 emmc_bus8: emmc-bus8 { 690 rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, 691 <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, 692 <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, 693 <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, 694 <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, 695 <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, 696 <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, 697 <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; 698 }; 699 }; 700 701 headset { 702 ts3a227e_int_l: ts3a227e-int-l { 703 rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; 704 }; 705 }; 706 707 pmic { 708 pmic_int_l: pmic-int-l { 709 /* 710 * Causes jerry to hang when probing bus 0 711 * rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; 712 */ 713 }; 714 }; 715 716 reboot { 717 ap_warm_reset_h: ap-warm-reset-h { 718 rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>; 719 }; 720 }; 721 722 sdio0 { 723 wifi_enable_h: wifienable-h { 724 rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; 725 }; 726 727 /* NOTE: mislabelled on schematic; should be bt_enable_h */ 728 bt_enable_l: bt-enable-l { 729 rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>; 730 }; 731 732 /* 733 * We run sdio0 at max speed; bump up drive strength. 734 * We also have external pulls, so disable the internal ones. 735 */ 736 sdio0_bus4: sdio0-bus4 { 737 rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 738 <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 739 <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 740 <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 741 }; 742 743 sdio0_cmd: sdio0-cmd { 744 rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 745 }; 746 747 sdio0_clk: sdio0-clk { 748 rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 749 }; 750 751 /* 752 * These pins are only present on very new veyron boards; on 753 * older boards bt_dev_wake is simply always high. Note that 754 * gpio4_26 is a NC on old veyron boards, so it doesn't hurt 755 * to map this pin everywhere 756 */ 757 bt_dev_wake_sleep: bt-dev-wake-sleep { 758 rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_low>; 759 }; 760 761 bt_dev_wake_awake: bt-dev-wake-awake { 762 rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_output_high>; 763 }; 764 }; 765 766 sdmmc { 767 /* 768 * We run sdmmc at max speed; bump up drive strength. 769 * We also have external pulls, so disable the internal ones. 770 */ 771 sdmmc_bus4: sdmmc-bus4 { 772 rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 773 <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 774 <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, 775 <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 776 }; 777 778 sdmmc_clk: sdmmc-clk { 779 rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 780 }; 781 782 sdmmc_cmd: sdmmc-cmd { 783 rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; 784 }; 785 786 /* 787 * Builtin CD line is hooked to ground to prevent JTAG at boot 788 * (and also to get the voltage rail correct). Make we 789 * configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't 790 * think there's a card inserted 791 */ 792 sdmmc_cd_disabled: sdmmc-cd-disabled { 793 rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>; 794 }; 795 796 /* This is where we actually hook up CD */ 797 sdmmc_cd_gpio: sdmmc-cd-gpio { 798 rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>; 799 }; 800 }; 801 802 tpm { 803 tpm_int_h: tpm-int-h { 804 rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; 805 }; 806 }; 807 808 write-protect { 809 fw_wp_ap: fw-wp-ap { 810 rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; 811 }; 812 }; 813}; 814 815&usbphy { 816 status = "okay"; 817}; 818 819&usb_host0_ehci { 820 status = "okay"; 821 needs-reset-on-resume; 822}; 823 824&usb_host1 { 825 status = "okay"; 826}; 827 828&usb_otg { 829 dr_mode = "host"; 830 status = "okay"; 831 assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; 832 assigned-clock-parents = <&cru SCLK_OTGPHY0>; 833}; 834 835&sdmmc { 836 u-boot,dm-pre-reloc; 837}; 838 839&gpio3 { 840 u-boot,dm-pre-reloc; 841}; 842 843&gpio8 { 844 u-boot,dm-pre-reloc; 845}; 846