1/*
2 * Google Veyron Jerry Rev 3+ board device tree source
3 *
4 * Copyright 2014 Google, Inc
5 *
6 * SPDX-License-Identifier:	GPL-2.0
7 */
8
9/dts-v1/;
10#include "rk3288-veyron-chromebook.dtsi"
11#include "cros-ec-sbs.dtsi"
12
13/ {
14	model = "Google Jerry";
15	compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
16		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
17		     "google,veyron-jerry-rev3", "google,veyron-jerry",
18		     "google,veyron", "rockchip,rk3288";
19
20        chosen {
21                stdout-path = &uart2;
22        };
23
24	panel_regulator: panel-regualtor {
25		compatible = "regulator-fixed";
26		enable-active-high;
27		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
28		pinctrl-names = "default";
29		pinctrl-0 = <&lcd_enable_h>;
30		regulator-name = "panel_regulator";
31		vin-supply = <&vcc33_sys>;
32	};
33
34	vcc18_lcd: vcc18-lcd {
35		compatible = "regulator-fixed";
36		enable-active-high;
37		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
38		pinctrl-names = "default";
39		pinctrl-0 = <&avdd_1v8_disp_en>;
40		regulator-name = "vcc18_lcd";
41		regulator-always-on;
42		regulator-boot-on;
43		vin-supply = <&vcc18_wl>;
44	};
45
46	backlight_regulator: backlight-regulator {
47		compatible = "regulator-fixed";
48		enable-active-high;
49		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
50		pinctrl-names = "default";
51		pinctrl-0 = <&bl_pwr_en>;
52		regulator-name = "backlight_regulator";
53		vin-supply = <&vcc33_sys>;
54		startup-delay-us = <15000>;
55	};
56};
57
58&dmc {
59	rockchip,pctl-timing = <0x29a 0xc8 0x1f4 0x42 0x4e 0x4 0xea 0xa
60		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
61		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
62		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
63		0x5 0x0>;
64	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
65		0xa60 0x40 0x10 0x0>;
66	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
67};
68
69&gpio_keys {
70	power {
71		gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
72	};
73};
74
75&backlight {
76	power-supply = <&backlight_regulator>;
77};
78
79&panel {
80	power-supply= <&panel_regulator>;
81};
82
83&rk808 {
84	pinctrl-names = "default";
85	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
86	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
87		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
88
89	regulators {
90		mic_vcc: LDO_REG2 {
91			regulator-always-on;
92			regulator-boot-on;
93			regulator-min-microvolt = <1800000>;
94			regulator-max-microvolt = <1800000>;
95			regulator-name = "mic_vcc";
96			regulator-suspend-mem-disabled;
97		};
98	};
99};
100
101&sdmmc {
102	pinctrl-names = "default";
103	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
104			&sdmmc_bus4>;
105	disable-wp;
106};
107
108&vcc_5v {
109	enable-active-high;
110	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
111	pinctrl-names = "default";
112	pinctrl-0 = <&drv_5v>;
113};
114
115&vcc50_hdmi {
116	enable-active-high;
117	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
118	pinctrl-names = "default";
119	pinctrl-0 = <&vcc50_hdmi_en>;
120};
121
122&edp {
123	pinctrl-names = "default";
124	pinctrl-0 = <&edp_hpd>;
125};
126
127&pinctrl {
128	backlight {
129		bl_pwr_en: bl_pwr_en {
130			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
131		};
132	};
133
134	buck-5v {
135		drv_5v: drv-5v {
136			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
137		};
138	};
139
140	edp {
141		edp_hpd: edp_hpd {
142			rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
143		};
144	};
145
146	emmc {
147		/* Make sure eMMC is not in reset */
148		emmc_deassert_reset: emmc-deassert-reset {
149			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
150		};
151	};
152
153	hdmi {
154		vcc50_hdmi_en: vcc50-hdmi-en {
155			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
156		};
157	};
158
159	lcd {
160		lcd_enable_h: lcd-en {
161			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
162		};
163
164		avdd_1v8_disp_en: avdd-1v8-disp-en {
165			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
166		};
167	};
168
169	pmic {
170		dvs_1: dvs-1 {
171			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
172		};
173
174		dvs_2: dvs-2 {
175			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
176		};
177	};
178};
179
180&i2c4 {
181	status = "okay";
182
183	/*
184	 * Trackpad pin control is shared between Elan and Synaptics devices
185	 * so we have to pull it up to the bus level.
186	 */
187	pinctrl-names = "default";
188	pinctrl-0 = <&i2c4_xfer &trackpad_int>;
189
190	trackpad@15 {
191		compatible = "elan,i2c_touchpad";
192		interrupt-parent = <&gpio7>;
193		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
194		/*
195		 * Remove the inherited pinctrl settings to avoid clashing
196		 * with bus-wide ones.
197		 */
198		/delete-property/pinctrl-names;
199		/delete-property/pinctrl-0;
200		reg = <0x15>;
201		vcc-supply = <&vcc33_io>;
202		wakeup-source;
203	};
204
205	trackpad@2c {
206		compatible = "hid-over-i2c";
207		interrupt-parent = <&gpio7>;
208		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
209		reg = <0x2c>;
210		hid-descr-addr = <0x0020>;
211		vcc-supply = <&vcc33_io>;
212		wakeup-source;
213	};
214};
215