1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Koelsch board
4 *
5 * Copyright (C) 2013 Renesas Electronics Corporation
6 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2014 Cogent Embedded, Inc.
8 */
9
10/*
11 * SSI-AK4643
12 *
13 * SW1: 1: AK4643
14 *      2: CN22
15 *      3: ADV7511
16 *
17 * This command is required when Playback/Capture
18 *
19 *	amixer set "LINEOUT Mixer DACL" on
20 *	amixer set "DVC Out" 100%
21 *	amixer set "DVC In" 100%
22 *
23 * You can use Mute
24 *
25 *	amixer set "DVC Out Mute" on
26 *	amixer set "DVC In Mute" on
27 *
28 * You can use Volume Ramp
29 *
30 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
31 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32 *	amixer set "DVC Out Ramp" on
33 *	aplay xxx.wav &
34 *	amixer set "DVC Out"  80%  // Volume Down
35 *	amixer set "DVC Out" 100%  // Volume Up
36 */
37
38/dts-v1/;
39#include "r8a7791.dtsi"
40#include <dt-bindings/gpio/gpio.h>
41#include <dt-bindings/input/input.h>
42
43/ {
44	model = "Koelsch";
45	compatible = "renesas,koelsch", "renesas,r8a7791";
46
47	aliases {
48		serial0 = &scif0;
49		serial1 = &scif1;
50		i2c9 = &gpioi2c1;
51		i2c10 = &gpioi2c2;
52		i2c11 = &gpioi2c4;
53		i2c12 = &i2cexio1;
54		i2c13 = &i2chdmi;
55		i2c14 = &i2cexio4;
56	};
57
58	chosen {
59		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
60		stdout-path = "serial0:115200n8";
61	};
62
63	memory@40000000 {
64		device_type = "memory";
65		reg = <0 0x40000000 0 0x40000000>;
66	};
67
68	memory@200000000 {
69		device_type = "memory";
70		reg = <2 0x00000000 0 0x40000000>;
71	};
72
73	lbsc {
74		#address-cells = <1>;
75		#size-cells = <1>;
76	};
77
78	keyboard {
79		compatible = "gpio-keys";
80
81		key-1 {
82			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
83			linux,code = <KEY_1>;
84			label = "SW2-1";
85			wakeup-source;
86			debounce-interval = <20>;
87		};
88		key-2 {
89			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
90			linux,code = <KEY_2>;
91			label = "SW2-2";
92			wakeup-source;
93			debounce-interval = <20>;
94		};
95		key-3 {
96			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
97			linux,code = <KEY_3>;
98			label = "SW2-3";
99			wakeup-source;
100			debounce-interval = <20>;
101		};
102		key-4 {
103			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
104			linux,code = <KEY_4>;
105			label = "SW2-4";
106			wakeup-source;
107			debounce-interval = <20>;
108		};
109		key-a {
110			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
111			linux,code = <KEY_A>;
112			label = "SW30";
113			wakeup-source;
114			debounce-interval = <20>;
115		};
116		key-b {
117			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
118			linux,code = <KEY_B>;
119			label = "SW31";
120			wakeup-source;
121			debounce-interval = <20>;
122		};
123		key-c {
124			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
125			linux,code = <KEY_C>;
126			label = "SW32";
127			wakeup-source;
128			debounce-interval = <20>;
129		};
130		key-d {
131			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
132			linux,code = <KEY_D>;
133			label = "SW33";
134			wakeup-source;
135			debounce-interval = <20>;
136		};
137		key-e {
138			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
139			linux,code = <KEY_E>;
140			label = "SW34";
141			wakeup-source;
142			debounce-interval = <20>;
143		};
144		key-f {
145			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
146			linux,code = <KEY_F>;
147			label = "SW35";
148			wakeup-source;
149			debounce-interval = <20>;
150		};
151		key-g {
152			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
153			linux,code = <KEY_G>;
154			label = "SW36";
155			wakeup-source;
156			debounce-interval = <20>;
157		};
158	};
159
160	leds {
161		compatible = "gpio-leds";
162		led6 {
163			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
164			label = "LED6";
165		};
166		led7 {
167			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
168			label = "LED7";
169		};
170		led8 {
171			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
172			label = "LED8";
173		};
174	};
175
176	vcc_sdhi0: regulator-vcc-sdhi0 {
177		compatible = "regulator-fixed";
178
179		regulator-name = "SDHI0 Vcc";
180		regulator-min-microvolt = <3300000>;
181		regulator-max-microvolt = <3300000>;
182
183		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
184		enable-active-high;
185	};
186
187	vccq_sdhi0: regulator-vccq-sdhi0 {
188		compatible = "regulator-gpio";
189
190		regulator-name = "SDHI0 VccQ";
191		regulator-min-microvolt = <1800000>;
192		regulator-max-microvolt = <3300000>;
193
194		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
195		gpios-states = <1>;
196		states = <3300000 1
197			  1800000 0>;
198	};
199
200	vcc_sdhi1: regulator-vcc-sdhi1 {
201		compatible = "regulator-fixed";
202
203		regulator-name = "SDHI1 Vcc";
204		regulator-min-microvolt = <3300000>;
205		regulator-max-microvolt = <3300000>;
206
207		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
208		enable-active-high;
209	};
210
211	vccq_sdhi1: regulator-vccq-sdhi1 {
212		compatible = "regulator-gpio";
213
214		regulator-name = "SDHI1 VccQ";
215		regulator-min-microvolt = <1800000>;
216		regulator-max-microvolt = <3300000>;
217
218		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
219		gpios-states = <1>;
220		states = <3300000 1
221			  1800000 0>;
222	};
223
224	vcc_sdhi2: regulator-vcc-sdhi2 {
225		compatible = "regulator-fixed";
226
227		regulator-name = "SDHI2 Vcc";
228		regulator-min-microvolt = <3300000>;
229		regulator-max-microvolt = <3300000>;
230
231		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
232		enable-active-high;
233	};
234
235	vccq_sdhi2: regulator-vccq-sdhi2 {
236		compatible = "regulator-gpio";
237
238		regulator-name = "SDHI2 VccQ";
239		regulator-min-microvolt = <1800000>;
240		regulator-max-microvolt = <3300000>;
241
242		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
243		gpios-states = <1>;
244		states = <3300000 1
245			  1800000 0>;
246	};
247
248	audio_clock: audio_clock {
249		compatible = "fixed-clock";
250		#clock-cells = <0>;
251		clock-frequency = <11289600>;
252	};
253
254	rsnd_ak4643: sound {
255		compatible = "simple-audio-card";
256
257		simple-audio-card,format = "left_j";
258		simple-audio-card,bitclock-master = <&sndcodec>;
259		simple-audio-card,frame-master = <&sndcodec>;
260
261		sndcpu: simple-audio-card,cpu {
262			sound-dai = <&rcar_sound>;
263		};
264
265		sndcodec: simple-audio-card,codec {
266			sound-dai = <&ak4643>;
267			clocks = <&audio_clock>;
268		};
269	};
270
271	hdmi-in {
272		compatible = "hdmi-connector";
273		type = "a";
274
275		port {
276			hdmi_con_in: endpoint {
277				remote-endpoint = <&adv7612_in>;
278			};
279		};
280	};
281
282	cec_clock: cec-clock {
283		compatible = "fixed-clock";
284		#clock-cells = <0>;
285		clock-frequency = <12000000>;
286	};
287
288	hdmi-out {
289		compatible = "hdmi-connector";
290		type = "a";
291
292		port {
293			hdmi_con_out: endpoint {
294				remote-endpoint = <&adv7511_out>;
295			};
296		};
297	};
298
299	x2_clk: x2-clock {
300		compatible = "fixed-clock";
301		#clock-cells = <0>;
302		clock-frequency = <74250000>;
303	};
304
305	x13_clk: x13-clock {
306		compatible = "fixed-clock";
307		#clock-cells = <0>;
308		clock-frequency = <148500000>;
309	};
310
311	gpioi2c1: i2c-9 {
312		#address-cells = <1>;
313		#size-cells = <0>;
314		compatible = "i2c-gpio";
315		status = "disabled";
316		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
317		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
318		i2c-gpio,delay-us = <5>;
319	};
320
321	gpioi2c2: i2c-10 {
322		#address-cells = <1>;
323		#size-cells = <0>;
324		compatible = "i2c-gpio";
325		status = "disabled";
326		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
327		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
328		i2c-gpio,delay-us = <5>;
329	};
330
331	gpioi2c4: i2c-11 {
332		#address-cells = <1>;
333		#size-cells = <0>;
334		compatible = "i2c-gpio";
335		status = "disabled";
336		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
337		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
338		i2c-gpio,delay-us = <5>;
339	};
340
341	/*
342	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
343	 * A fallback to GPIO is provided.
344	 */
345	i2cexio1: i2c-12 {
346		compatible = "i2c-demux-pinctrl";
347		i2c-parent = <&i2c1>, <&gpioi2c1>;
348		i2c-bus-name = "i2c-exio1";
349		#address-cells = <1>;
350		#size-cells = <0>;
351	};
352
353	/*
354	 * A fallback to GPIO is provided for I2C2.
355	 */
356	i2chdmi: i2c-13 {
357		compatible = "i2c-demux-pinctrl";
358		i2c-parent = <&i2c2>, <&gpioi2c2>;
359		i2c-bus-name = "i2c-hdmi";
360		#address-cells = <1>;
361		#size-cells = <0>;
362
363		ak4643: codec@12 {
364			compatible = "asahi-kasei,ak4643";
365			#sound-dai-cells = <0>;
366			reg = <0x12>;
367		};
368
369		composite-in@20 {
370			compatible = "adi,adv7180";
371			reg = <0x20>;
372			remote = <&vin1>;
373
374			port {
375				adv7180: endpoint {
376					bus-width = <8>;
377					remote-endpoint = <&vin1ep>;
378				};
379			};
380		};
381
382		hdmi@39 {
383			compatible = "adi,adv7511w";
384			reg = <0x39>;
385			interrupt-parent = <&gpio3>;
386			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
387			clocks = <&cec_clock>;
388			clock-names = "cec";
389
390			adi,input-depth = <8>;
391			adi,input-colorspace = "rgb";
392			adi,input-clock = "1x";
393			adi,input-style = <1>;
394			adi,input-justification = "evenly";
395
396			ports {
397				#address-cells = <1>;
398				#size-cells = <0>;
399
400				port@0 {
401					reg = <0>;
402					adv7511_in: endpoint {
403						remote-endpoint = <&du_out_rgb>;
404					};
405				};
406
407				port@1 {
408					reg = <1>;
409					adv7511_out: endpoint {
410						remote-endpoint = <&hdmi_con_out>;
411					};
412				};
413			};
414		};
415
416		hdmi-in@4c {
417			compatible = "adi,adv7612";
418			reg = <0x4c>;
419			interrupt-parent = <&gpio4>;
420			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
421			default-input = <0>;
422
423			ports {
424				#address-cells = <1>;
425				#size-cells = <0>;
426
427				port@0 {
428					reg = <0>;
429					adv7612_in: endpoint {
430						remote-endpoint = <&hdmi_con_in>;
431					};
432				};
433
434				port@2 {
435					reg = <2>;
436					adv7612_out: endpoint {
437						remote-endpoint = <&vin0ep2>;
438					};
439				};
440			};
441		};
442
443		eeprom@50 {
444			compatible = "renesas,r1ex24002", "atmel,24c02";
445			reg = <0x50>;
446			pagesize = <16>;
447		};
448	};
449
450	/*
451	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
452	 * A fallback to GPIO is provided.
453	 */
454	i2cexio4: i2c-14 {
455		compatible = "i2c-demux-pinctrl";
456		i2c-parent = <&i2c4>, <&gpioi2c4>;
457		i2c-bus-name = "i2c-exio4";
458		#address-cells = <1>;
459		#size-cells = <0>;
460	};
461};
462
463&du {
464	pinctrl-0 = <&du_pins>;
465	pinctrl-names = "default";
466	status = "okay";
467
468	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
469		 <&x13_clk>, <&x2_clk>;
470	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
471
472	ports {
473		port@0 {
474			endpoint {
475				remote-endpoint = <&adv7511_in>;
476			};
477		};
478	};
479};
480
481&lvds0 {
482	status = "okay";
483
484	ports {
485		port@1 {
486			lvds_connector: endpoint {
487			};
488		};
489	};
490};
491
492&extal_clk {
493	clock-frequency = <20000000>;
494};
495
496&pfc {
497	pinctrl-0 = <&scif_clk_pins>;
498	pinctrl-names = "default";
499
500	i2c1_pins: i2c1 {
501		groups = "i2c1";
502		function = "i2c1";
503	};
504
505	i2c2_pins: i2c2 {
506		groups = "i2c2";
507		function = "i2c2";
508	};
509
510	i2c4_pins: i2c4 {
511		groups = "i2c4_c";
512		function = "i2c4";
513	};
514
515	du_pins: du {
516		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
517		function = "du";
518	};
519
520	scif0_pins: scif0 {
521		groups = "scif0_data_d";
522		function = "scif0";
523	};
524
525	scif1_pins: scif1 {
526		groups = "scif1_data_d";
527		function = "scif1";
528	};
529
530	scif_clk_pins: scif_clk {
531		groups = "scif_clk";
532		function = "scif_clk";
533	};
534
535	ether_pins: ether {
536		groups = "eth_link", "eth_mdio", "eth_rmii";
537		function = "eth";
538	};
539
540	phy1_pins: phy1 {
541		groups = "intc_irq0";
542		function = "intc";
543	};
544
545	sdhi0_pins: sd0 {
546		groups = "sdhi0_data4", "sdhi0_ctrl";
547		function = "sdhi0";
548		power-source = <3300>;
549	};
550
551	sdhi0_pins_uhs: sd0_uhs {
552		groups = "sdhi0_data4", "sdhi0_ctrl";
553		function = "sdhi0";
554		power-source = <1800>;
555	};
556
557	sdhi1_pins: sd1 {
558		groups = "sdhi1_data4", "sdhi1_ctrl";
559		function = "sdhi1";
560		power-source = <3300>;
561	};
562
563	sdhi1_pins_uhs: sd1_uhs {
564		groups = "sdhi1_data4", "sdhi1_ctrl";
565		function = "sdhi1";
566		power-source = <1800>;
567	};
568
569	sdhi2_pins: sd2 {
570		groups = "sdhi2_data4", "sdhi2_ctrl";
571		function = "sdhi2";
572		power-source = <3300>;
573	};
574
575	sdhi2_pins_uhs: sd2_uhs {
576		groups = "sdhi2_data4", "sdhi2_ctrl";
577		function = "sdhi2";
578		power-source = <1800>;
579	};
580
581	qspi_pins: qspi {
582		groups = "qspi_ctrl", "qspi_data4";
583		function = "qspi";
584	};
585
586	msiof0_pins: msiof0 {
587		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
588				 "msiof0_tx";
589		function = "msiof0";
590	};
591
592	usb0_pins: usb0 {
593		groups = "usb0";
594		function = "usb0";
595	};
596
597	usb1_pins: usb1 {
598		groups = "usb1";
599		function = "usb1";
600	};
601
602	vin0_pins: vin0 {
603		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
604		function = "vin0";
605	};
606
607	vin1_pins: vin1 {
608		groups = "vin1_data8", "vin1_clk";
609		function = "vin1";
610	};
611
612	sound_pins: sound {
613		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
614		function = "ssi";
615	};
616
617	sound_clk_pins: sound_clk {
618		groups = "audio_clk_a";
619		function = "audio_clk";
620	};
621};
622
623&ether {
624	pinctrl-0 = <&ether_pins &phy1_pins>;
625	pinctrl-names = "default";
626
627	phy-handle = <&phy1>;
628	renesas,ether-link-active-low;
629	status = "okay";
630
631	phy1: ethernet-phy@1 {
632		reg = <1>;
633		interrupt-parent = <&irqc0>;
634		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
635		micrel,led-mode = <1>;
636	};
637};
638
639&cmt0 {
640	status = "okay";
641};
642
643&sata0 {
644	status = "okay";
645};
646
647&scif0 {
648	pinctrl-0 = <&scif0_pins>;
649	pinctrl-names = "default";
650
651	status = "okay";
652};
653
654&scif1 {
655	pinctrl-0 = <&scif1_pins>;
656	pinctrl-names = "default";
657
658	status = "okay";
659};
660
661&scif_clk {
662	clock-frequency = <14745600>;
663};
664
665&sdhi0 {
666	pinctrl-0 = <&sdhi0_pins>;
667	pinctrl-1 = <&sdhi0_pins_uhs>;
668	pinctrl-names = "default", "state_uhs";
669
670	vmmc-supply = <&vcc_sdhi0>;
671	vqmmc-supply = <&vccq_sdhi0>;
672	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
673	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
674	sd-uhs-sdr50;
675	sd-uhs-sdr104;
676	status = "okay";
677};
678
679&sdhi1 {
680	pinctrl-0 = <&sdhi1_pins>;
681	pinctrl-1 = <&sdhi1_pins_uhs>;
682	pinctrl-names = "default", "state_uhs";
683
684	vmmc-supply = <&vcc_sdhi1>;
685	vqmmc-supply = <&vccq_sdhi1>;
686	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
687	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
688	sd-uhs-sdr50;
689	status = "okay";
690};
691
692&sdhi2 {
693	pinctrl-0 = <&sdhi2_pins>;
694	pinctrl-1 = <&sdhi2_pins_uhs>;
695	pinctrl-names = "default", "state_uhs";
696
697	vmmc-supply = <&vcc_sdhi2>;
698	vqmmc-supply = <&vccq_sdhi2>;
699	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
700	sd-uhs-sdr50;
701	status = "okay";
702};
703
704&qspi {
705	pinctrl-0 = <&qspi_pins>;
706	pinctrl-names = "default";
707
708	status = "okay";
709
710	flash: flash@0 {
711		compatible = "spansion,s25fl512s", "jedec,spi-nor";
712		reg = <0>;
713		spi-max-frequency = <30000000>;
714		spi-tx-bus-width = <4>;
715		spi-rx-bus-width = <4>;
716		spi-cpha;
717		spi-cpol;
718		m25p,fast-read;
719
720		partitions {
721			compatible = "fixed-partitions";
722			#address-cells = <1>;
723			#size-cells = <1>;
724
725			partition@0 {
726				label = "loader";
727				reg = <0x00000000 0x00080000>;
728				read-only;
729			};
730			partition@80000 {
731				label = "user";
732				reg = <0x00080000 0x00580000>;
733				read-only;
734			};
735			partition@600000 {
736				label = "flash";
737				reg = <0x00600000 0x03a00000>;
738			};
739		};
740	};
741};
742
743&msiof0 {
744	pinctrl-0 = <&msiof0_pins>;
745	pinctrl-names = "default";
746
747	status = "okay";
748
749	pmic: pmic@0 {
750		compatible = "renesas,r2a11302ft";
751		reg = <0>;
752		spi-max-frequency = <6000000>;
753		spi-cpol;
754		spi-cpha;
755	};
756};
757
758&i2c1 {
759	pinctrl-0 = <&i2c1_pins>;
760	pinctrl-names = "i2c-exio1";
761};
762
763&i2c2 {
764	pinctrl-0 = <&i2c2_pins>;
765	pinctrl-names = "i2c-hdmi";
766
767	clock-frequency = <100000>;
768};
769
770&i2c4 {
771	pinctrl-0 = <&i2c4_pins>;
772	pinctrl-names = "i2c-exio4";
773};
774
775&i2c6 {
776	status = "okay";
777	clock-frequency = <100000>;
778
779	pmic@58 {
780		compatible = "dlg,da9063";
781		reg = <0x58>;
782		interrupt-parent = <&irqc0>;
783		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
784		interrupt-controller;
785
786		rtc {
787			compatible = "dlg,da9063-rtc";
788		};
789
790		wdt {
791			compatible = "dlg,da9063-watchdog";
792		};
793	};
794
795	vdd_dvfs: regulator@68 {
796		compatible = "dlg,da9210";
797		reg = <0x68>;
798		interrupt-parent = <&irqc0>;
799		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
800
801		regulator-min-microvolt = <1000000>;
802		regulator-max-microvolt = <1000000>;
803		regulator-boot-on;
804		regulator-always-on;
805	};
806};
807
808&pci0 {
809	status = "okay";
810	pinctrl-0 = <&usb0_pins>;
811	pinctrl-names = "default";
812};
813
814&pci1 {
815	status = "okay";
816	pinctrl-0 = <&usb1_pins>;
817	pinctrl-names = "default";
818};
819
820&hsusb {
821	status = "okay";
822	pinctrl-0 = <&usb0_pins>;
823	pinctrl-names = "default";
824	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
825};
826
827&usbphy {
828	status = "okay";
829};
830
831&pcie_bus_clk {
832	clock-frequency = <100000000>;
833};
834
835&pciec {
836	status = "okay";
837};
838
839&cpu0 {
840	cpu0-supply = <&vdd_dvfs>;
841};
842
843/* HDMI video input */
844&vin0 {
845	status = "okay";
846	pinctrl-0 = <&vin0_pins>;
847	pinctrl-names = "default";
848
849	port {
850		#address-cells = <1>;
851		#size-cells = <0>;
852
853		vin0ep2: endpoint {
854			remote-endpoint = <&adv7612_out>;
855			bus-width = <24>;
856			hsync-active = <0>;
857			vsync-active = <0>;
858			pclk-sample = <1>;
859			data-active = <1>;
860		};
861	};
862};
863
864/* composite video input */
865&vin1 {
866	status = "okay";
867	pinctrl-0 = <&vin1_pins>;
868	pinctrl-names = "default";
869
870	port {
871		#address-cells = <1>;
872		#size-cells = <0>;
873
874		vin1ep: endpoint {
875			remote-endpoint = <&adv7180>;
876			bus-width = <8>;
877		};
878	};
879};
880
881&rcar_sound {
882	pinctrl-0 = <&sound_pins &sound_clk_pins>;
883	pinctrl-names = "default";
884
885	/* Single DAI */
886	#sound-dai-cells = <0>;
887
888	status = "okay";
889
890	rcar_sound,dai {
891		dai0 {
892			playback = <&ssi0 &src2 &dvc0>;
893			capture  = <&ssi1 &src3 &dvc1>;
894		};
895	};
896};
897
898&ssi1 {
899	shared-pin;
900};
901