xref: /openbmc/u-boot/arch/arm/dts/omap3-evm-37xx.dts (revision fd0bc623)
1/*
2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "omap36xx.dtsi"
11#include "omap3-evm-common.dtsi"
12#include "omap3-evm-processor-common.dtsi"
13
14/ {
15	model = "TI OMAP37XX EVM (TMDSEVM3730)";
16	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
17};
18
19&omap3_pmx_core2 {
20	pinctrl-names = "default";
21	pinctrl-0 = <&hsusb2_2_pins>;
22
23	ehci_phy_pins: pinmux_ehci_phy_pins {
24		pinctrl-single,pins = <
25
26		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
27		OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
28
29		/* EHCI VBUS etk_d8.gpio_22 */
30		OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
31		>;
32	};
33
34	/* Used by OHCI and EHCI. OHCI won't work without external phy */
35	hsusb2_2_pins: pinmux_hsusb2_2_pins {
36		pinctrl-single,pins = <
37
38		/* etk_d10.hsusb2_clk */
39		OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
40
41		/* etk_d11.hsusb2_stp */
42		OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
43
44		/* etk_d12.hsusb2_dir */
45		OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
46
47		/* etk_d13.hsusb2_nxt */
48		OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
49
50		/* etk_d14.hsusb2_data0 */
51		OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
52
53		/* etk_d15.hsusb2_data1 */
54		OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
55		>;
56	};
57};
58
59&gpmc {
60	nand@0,0 {
61		compatible = "ti,omap2-nand";
62		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
63		interrupt-parent = <&gpmc>;
64		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
65			     <1 IRQ_TYPE_NONE>;	/* termcount */
66		linux,mtd-name= "hynix,h8kds0un0mer-4em";
67		nand-bus-width = <16>;
68		gpmc,device-width = <2>;
69		ti,nand-ecc-opt = "bch8";
70
71		gpmc,sync-clk-ps = <0>;
72		gpmc,cs-on-ns = <0>;
73		gpmc,cs-rd-off-ns = <44>;
74		gpmc,cs-wr-off-ns = <44>;
75		gpmc,adv-on-ns = <6>;
76		gpmc,adv-rd-off-ns = <34>;
77		gpmc,adv-wr-off-ns = <44>;
78		gpmc,we-off-ns = <40>;
79		gpmc,oe-off-ns = <54>;
80		gpmc,access-ns = <64>;
81		gpmc,rd-cycle-ns = <82>;
82		gpmc,wr-cycle-ns = <82>;
83		gpmc,wr-access-ns = <40>;
84		gpmc,wr-data-mux-bus-ns = <0>;
85
86		#address-cells = <1>;
87		#size-cells = <1>;
88
89		partition@0 {
90			label = "X-Loader";
91			reg = <0 0x80000>;
92		};
93		partition@0x80000 {
94			label = "U-Boot";
95			reg = <0x80000 0x1c0000>;
96		};
97		partition@0x1c0000 {
98			label = "Environment";
99			reg = <0x240000 0x40000>;
100		};
101		partition@0x280000 {
102			label = "Kernel";
103			reg = <0x280000 0x500000>;
104		};
105		partition@0x780000 {
106			label = "Filesystem";
107			reg = <0x780000 0x1f880000>;
108		};
109	};
110};
111