1/* 2 * Freescale ls1021a SOC common device tree source 3 * 4 * Copyright 2013-2015 Freescale Semiconductor, Inc. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9#include "skeleton.dtsi" 10#include <dt-bindings/interrupt-controller/arm-gic.h> 11 12/ { 13 compatible = "fsl,ls1021a"; 14 interrupt-parent = <&gic>; 15 16 aliases { 17 serial0 = &lpuart0; 18 serial1 = &lpuart1; 19 serial2 = &lpuart2; 20 serial3 = &lpuart3; 21 serial4 = &lpuart4; 22 serial5 = &lpuart5; 23 sysclk = &sysclk; 24 }; 25 26 cpus { 27 #address-cells = <1>; 28 #size-cells = <0>; 29 30 cpu@f00 { 31 compatible = "arm,cortex-a7"; 32 device_type = "cpu"; 33 reg = <0xf00>; 34 clocks = <&cluster1_clk>; 35 }; 36 37 cpu@f01 { 38 compatible = "arm,cortex-a7"; 39 device_type = "cpu"; 40 reg = <0xf01>; 41 clocks = <&cluster1_clk>; 42 }; 43 }; 44 45 timer { 46 compatible = "arm,armv7-timer"; 47 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 48 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 49 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 50 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; 51 }; 52 53 pmu { 54 compatible = "arm,cortex-a7-pmu"; 55 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 56 <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 57 }; 58 59 soc { 60 compatible = "simple-bus"; 61 #address-cells = <1>; 62 #size-cells = <1>; 63 device_type = "soc"; 64 interrupt-parent = <&gic>; 65 ranges; 66 67 gic: interrupt-controller@1400000 { 68 compatible = "arm,cortex-a7-gic"; 69 #interrupt-cells = <3>; 70 interrupt-controller; 71 reg = <0x1401000 0x1000>, 72 <0x1402000 0x1000>, 73 <0x1404000 0x2000>, 74 <0x1406000 0x2000>; 75 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; 76 77 }; 78 79 ifc: ifc@1530000 { 80 compatible = "fsl,ifc", "simple-bus"; 81 reg = <0x1530000 0x10000>; 82 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 83 }; 84 85 dcfg: dcfg@1ee0000 { 86 compatible = "fsl,ls1021a-dcfg", "syscon"; 87 reg = <0x1ee0000 0x10000>; 88 big-endian; 89 }; 90 91 esdhc: esdhc@1560000 { 92 compatible = "fsl,esdhc"; 93 reg = <0x1560000 0x10000>; 94 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; 95 clock-frequency = <0>; 96 voltage-ranges = <1800 1800 3300 3300>; 97 sdhci,auto-cmd12; 98 big-endian; 99 bus-width = <4>; 100 status = "disabled"; 101 }; 102 103 scfg: scfg@1570000 { 104 compatible = "fsl,ls1021a-scfg", "syscon"; 105 reg = <0x1570000 0x10000>; 106 big-endian; 107 }; 108 109 clockgen: clocking@1ee1000 { 110 #address-cells = <1>; 111 #size-cells = <1>; 112 ranges = <0x0 0x1ee1000 0x10000>; 113 114 sysclk: sysclk { 115 compatible = "fixed-clock"; 116 #clock-cells = <0>; 117 clock-output-names = "sysclk"; 118 }; 119 120 cga_pll1: pll@800 { 121 compatible = "fsl,qoriq-core-pll-2.0"; 122 #clock-cells = <1>; 123 reg = <0x800 0x10>; 124 clocks = <&sysclk>; 125 clock-output-names = "cga-pll1", "cga-pll1-div2", 126 "cga-pll1-div4"; 127 }; 128 129 platform_clk: pll@c00 { 130 compatible = "fsl,qoriq-core-pll-2.0"; 131 #clock-cells = <1>; 132 reg = <0xc00 0x10>; 133 clocks = <&sysclk>; 134 clock-output-names = "platform-clk", "platform-clk-div2"; 135 }; 136 137 cluster1_clk: clk0c0@0 { 138 compatible = "fsl,qoriq-core-mux-2.0"; 139 #clock-cells = <0>; 140 reg = <0x0 0x10>; 141 clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; 142 clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; 143 clock-output-names = "cluster1-clk"; 144 }; 145 }; 146 147 dspi0: dspi@2100000 { 148 compatible = "fsl,vf610-dspi"; 149 #address-cells = <1>; 150 #size-cells = <0>; 151 reg = <0x2100000 0x10000>; 152 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 153 clock-names = "dspi"; 154 clocks = <&platform_clk 1>; 155 num-cs = <6>; 156 big-endian; 157 status = "disabled"; 158 }; 159 160 dspi1: dspi@2110000 { 161 compatible = "fsl,vf610-dspi"; 162 #address-cells = <1>; 163 #size-cells = <0>; 164 reg = <0x2110000 0x10000>; 165 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 166 clock-names = "dspi"; 167 clocks = <&platform_clk 1>; 168 num-cs = <6>; 169 big-endian; 170 status = "disabled"; 171 }; 172 173 i2c0: i2c@2180000 { 174 compatible = "fsl,vf610-i2c"; 175 #address-cells = <1>; 176 #size-cells = <0>; 177 reg = <0x2180000 0x10000>; 178 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 179 clock-names = "i2c"; 180 clocks = <&platform_clk 1>; 181 status = "disabled"; 182 }; 183 184 i2c1: i2c@2190000 { 185 compatible = "fsl,vf610-i2c"; 186 #address-cells = <1>; 187 #size-cells = <0>; 188 reg = <0x2190000 0x10000>; 189 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 190 clock-names = "i2c"; 191 clocks = <&platform_clk 1>; 192 status = "disabled"; 193 }; 194 195 i2c2: i2c@21a0000 { 196 compatible = "fsl,vf610-i2c"; 197 #address-cells = <1>; 198 #size-cells = <0>; 199 reg = <0x21a0000 0x10000>; 200 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 201 clock-names = "i2c"; 202 clocks = <&platform_clk 1>; 203 status = "disabled"; 204 }; 205 206 uart0: serial@21c0500 { 207 compatible = "fsl,16550-FIFO64", "ns16550a"; 208 reg = <0x21c0500 0x100>; 209 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 210 clock-frequency = <0>; 211 fifo-size = <15>; 212 status = "disabled"; 213 }; 214 215 uart1: serial@21c0600 { 216 compatible = "fsl,16550-FIFO64", "ns16550a"; 217 reg = <0x21c0600 0x100>; 218 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 219 clock-frequency = <0>; 220 fifo-size = <15>; 221 status = "disabled"; 222 }; 223 224 uart2: serial@21d0500 { 225 compatible = "fsl,16550-FIFO64", "ns16550a"; 226 reg = <0x21d0500 0x100>; 227 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 228 clock-frequency = <0>; 229 fifo-size = <15>; 230 status = "disabled"; 231 }; 232 233 uart3: serial@21d0600 { 234 compatible = "fsl,16550-FIFO64", "ns16550a"; 235 reg = <0x21d0600 0x100>; 236 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 237 clock-frequency = <0>; 238 fifo-size = <15>; 239 status = "disabled"; 240 }; 241 242 lpuart0: serial@2950000 { 243 compatible = "fsl,ls1021a-lpuart"; 244 reg = <0x2950000 0x1000>; 245 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 246 clocks = <&sysclk>; 247 clock-names = "ipg"; 248 status = "disabled"; 249 }; 250 251 lpuart1: serial@2960000 { 252 compatible = "fsl,ls1021a-lpuart"; 253 reg = <0x2960000 0x1000>; 254 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 255 clocks = <&platform_clk 1>; 256 clock-names = "ipg"; 257 status = "disabled"; 258 }; 259 260 lpuart2: serial@2970000 { 261 compatible = "fsl,ls1021a-lpuart"; 262 reg = <0x2970000 0x1000>; 263 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 264 clocks = <&platform_clk 1>; 265 clock-names = "ipg"; 266 status = "disabled"; 267 }; 268 269 lpuart3: serial@2980000 { 270 compatible = "fsl,ls1021a-lpuart"; 271 reg = <0x2980000 0x1000>; 272 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 273 clocks = <&platform_clk 1>; 274 clock-names = "ipg"; 275 status = "disabled"; 276 }; 277 278 lpuart4: serial@2990000 { 279 compatible = "fsl,ls1021a-lpuart"; 280 reg = <0x2990000 0x1000>; 281 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 282 clocks = <&platform_clk 1>; 283 clock-names = "ipg"; 284 status = "disabled"; 285 }; 286 287 lpuart5: serial@29a0000 { 288 compatible = "fsl,ls1021a-lpuart"; 289 reg = <0x29a0000 0x1000>; 290 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 291 clocks = <&platform_clk 1>; 292 clock-names = "ipg"; 293 status = "disabled"; 294 }; 295 296 wdog0: watchdog@2ad0000 { 297 compatible = "fsl,imx21-wdt"; 298 reg = <0x2ad0000 0x10000>; 299 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; 300 clocks = <&platform_clk 1>; 301 clock-names = "wdog-en"; 302 big-endian; 303 }; 304 305 sai1: sai@2b50000 { 306 compatible = "fsl,vf610-sai"; 307 reg = <0x2b50000 0x10000>; 308 interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; 309 clocks = <&platform_clk 1>; 310 clock-names = "sai"; 311 dma-names = "tx", "rx"; 312 dmas = <&edma0 1 47>, 313 <&edma0 1 46>; 314 big-endian; 315 status = "disabled"; 316 }; 317 318 sai2: sai@2b60000 { 319 compatible = "fsl,vf610-sai"; 320 reg = <0x2b60000 0x10000>; 321 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; 322 clocks = <&platform_clk 1>; 323 clock-names = "sai"; 324 dma-names = "tx", "rx"; 325 dmas = <&edma0 1 45>, 326 <&edma0 1 44>; 327 big-endian; 328 status = "disabled"; 329 }; 330 331 edma0: edma@2c00000 { 332 #dma-cells = <2>; 333 compatible = "fsl,vf610-edma"; 334 reg = <0x2c00000 0x10000>, 335 <0x2c10000 0x10000>, 336 <0x2c20000 0x10000>; 337 interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, 338 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; 339 interrupt-names = "edma-tx", "edma-err"; 340 dma-channels = <32>; 341 big-endian; 342 clock-names = "dmamux0", "dmamux1"; 343 clocks = <&platform_clk 1>, 344 <&platform_clk 1>; 345 }; 346 347 mdio0: mdio@2d24000 { 348 compatible = "gianfar"; 349 device_type = "mdio"; 350 #address-cells = <1>; 351 #size-cells = <0>; 352 reg = <0x2d24000 0x4000>; 353 }; 354 355 usb@8600000 { 356 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; 357 reg = <0x8600000 0x1000>; 358 interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; 359 dr_mode = "host"; 360 phy_type = "ulpi"; 361 }; 362 363 usb3@3100000 { 364 compatible = "snps,dwc3"; 365 reg = <0x3100000 0x10000>; 366 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; 367 dr_mode = "host"; 368 }; 369 }; 370}; 371