1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Freescale ls1021a QDS board common device tree source 4 * 5 * Copyright 2013-2015 Freescale Semiconductor, Inc. 6 */ 7 8#include "ls1021a.dtsi" 9 10/ { 11 model = "LS1021A QDS Board"; 12 13 aliases { 14 enet0_rgmii_phy = &rgmii_phy1; 15 enet1_rgmii_phy = &rgmii_phy2; 16 enet2_rgmii_phy = &rgmii_phy3; 17 enet0_sgmii_phy = &sgmii_phy1c; 18 enet1_sgmii_phy = &sgmii_phy1d; 19 spi0 = &qspi; 20 spi1 = &dspi0; 21 }; 22}; 23 24&dspi0 { 25 bus-num = <0>; 26 status = "okay"; 27 28 dspiflash: at45db021d@0 { 29 #address-cells = <1>; 30 #size-cells = <1>; 31 compatible = "atmel,dataflash"; 32 spi-max-frequency = <16000000>; 33 spi-cpol; 34 spi-cpha; 35 reg = <0>; 36 }; 37}; 38 39&qspi { 40 bus-num = <0>; 41 status = "okay"; 42 43 qflash0: s25fl128s@0 { 44 #address-cells = <1>; 45 #size-cells = <1>; 46 compatible = "spi-flash"; 47 spi-max-frequency = <20000000>; 48 reg = <0>; 49 }; 50}; 51 52&i2c0 { 53 status = "okay"; 54 55 pca9547: mux@77 { 56 reg = <0x77>; 57 #address-cells = <1>; 58 #size-cells = <0>; 59 60 i2c@0 { 61 #address-cells = <1>; 62 #size-cells = <0>; 63 reg = <0x0>; 64 65 ds3232: rtc@68 { 66 compatible = "dallas,ds3232"; 67 reg = <0x68>; 68 interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; 69 }; 70 }; 71 72 i2c@2 { 73 #address-cells = <1>; 74 #size-cells = <0>; 75 reg = <0x2>; 76 77 ina220@40 { 78 compatible = "ti,ina220"; 79 reg = <0x40>; 80 shunt-resistor = <1000>; 81 }; 82 83 ina220@41 { 84 compatible = "ti,ina220"; 85 reg = <0x41>; 86 shunt-resistor = <1000>; 87 }; 88 }; 89 90 i2c@3 { 91 #address-cells = <1>; 92 #size-cells = <0>; 93 reg = <0x3>; 94 95 eeprom@56 { 96 compatible = "atmel,24c512"; 97 reg = <0x56>; 98 }; 99 100 eeprom@57 { 101 compatible = "atmel,24c512"; 102 reg = <0x57>; 103 }; 104 105 adt7461a@4c { 106 compatible = "adi,adt7461a"; 107 reg = <0x4c>; 108 }; 109 }; 110 }; 111}; 112 113&ifc { 114 #address-cells = <2>; 115 #size-cells = <1>; 116 /* NOR, NAND Flashes and FPGA on board */ 117 ranges = <0x0 0x0 0x60000000 0x08000000 118 0x2 0x0 0x7e800000 0x00010000 119 0x3 0x0 0x7fb00000 0x00000100>; 120 status = "okay"; 121 122 nor@0,0 { 123 #address-cells = <1>; 124 #size-cells = <1>; 125 compatible = "cfi-flash"; 126 reg = <0x0 0x0 0x8000000>; 127 bank-width = <2>; 128 device-width = <1>; 129 }; 130 131 fpga: board-control@3,0 { 132 #address-cells = <1>; 133 #size-cells = <1>; 134 compatible = "simple-bus"; 135 reg = <0x3 0x0 0x0000100>; 136 bank-width = <1>; 137 device-width = <1>; 138 ranges = <0 3 0 0x100>; 139 140 mdio-mux-emi1 { 141 compatible = "mdio-mux-mmioreg"; 142 mdio-parent-bus = <&mdio0>; 143 #address-cells = <1>; 144 #size-cells = <0>; 145 reg = <0x54 1>; /* BRDCFG4 */ 146 mux-mask = <0xe0>; /* EMI1[2:0] */ 147 148 /* Onboard PHYs */ 149 ls1021amdio0: mdio@0 { 150 reg = <0>; 151 #address-cells = <1>; 152 #size-cells = <0>; 153 rgmii_phy1: ethernet-phy@1 { 154 reg = <0x1>; 155 }; 156 }; 157 158 ls1021amdio1: mdio@20 { 159 reg = <0x20>; 160 #address-cells = <1>; 161 #size-cells = <0>; 162 rgmii_phy2: ethernet-phy@2 { 163 reg = <0x2>; 164 }; 165 }; 166 167 ls1021amdio2: mdio@40 { 168 reg = <0x40>; 169 #address-cells = <1>; 170 #size-cells = <0>; 171 rgmii_phy3: ethernet-phy@3 { 172 reg = <0x3>; 173 }; 174 }; 175 176 ls1021amdio3: mdio@60 { 177 reg = <0x60>; 178 #address-cells = <1>; 179 #size-cells = <0>; 180 sgmii_phy1c: ethernet-phy@1c { 181 reg = <0x1c>; 182 }; 183 }; 184 185 ls1021amdio4: mdio@80 { 186 reg = <0x80>; 187 #address-cells = <1>; 188 #size-cells = <0>; 189 sgmii_phy1d: ethernet-phy@1d { 190 reg = <0x1d>; 191 }; 192 }; 193 }; 194 }; 195}; 196 197&lpuart0 { 198 status = "okay"; 199}; 200 201&mdio0 { 202 tbi0: tbi-phy@8 { 203 reg = <0x8>; 204 device_type = "tbi-phy"; 205 }; 206}; 207 208&uart0 { 209 status = "okay"; 210}; 211 212&uart1 { 213 status = "okay"; 214}; 215 216&sata { 217 status = "okay"; 218}; 219