1/* 2 * This program is free software; you can redistribute it and/or modify 3 * it under the terms of the GNU General Public License version 2 as 4 * published by the Free Software Foundation. 5 */ 6 7/dts-v1/; 8 9#include "omap36xx.dtsi" 10#include "logicpd-torpedo-som.dtsi" 11#include "omap-gpmc-smsc9221.dtsi" 12 13/ { 14 model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit"; 15 compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; 16 17 gpio_keys { 18 compatible = "gpio-keys"; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; 21 22 sysboot2 { 23 label = "sysboot2"; 24 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ 25 linux,code = <BTN_0>; 26 wakeup-source; 27 }; 28 29 sysboot5 { 30 label = "sysboot5"; 31 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ 32 linux,code = <BTN_1>; 33 wakeup-source; 34 }; 35 36 gpio1 { 37 label = "gpio1"; 38 gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ 39 linux,code = <BTN_2>; 40 wakeup-source; 41 }; 42 43 gpio2 { 44 label = "gpio2"; 45 gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ 46 linux,code = <BTN_3>; 47 wakeup-source; 48 }; 49 }; 50 51 sound { 52 compatible = "ti,omap-twl4030"; 53 ti,model = "omap3logic"; 54 ti,mcbsp = <&mcbsp2>; 55 }; 56 57 leds { 58 compatible = "gpio-leds"; 59 pinctrl-names = "default"; 60 pinctrl-0 = <&led_pins>; 61 62 led1 { 63 label = "led1"; 64 gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ 65 linux,default-trigger = "cpu0"; 66 }; 67 68 led2 { 69 label = "led2"; 70 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ 71 linux,default-trigger = "none"; 72 }; 73 }; 74 75 pwm10: dmtimer-pwm { 76 compatible = "ti,omap-dmtimer-pwm"; 77 pinctrl-names = "default"; 78 pinctrl-0 = <&pwm_pins>; 79 ti,timers = <&timer10>; 80 #pwm-cells = <3>; 81 }; 82 83}; 84 85&vaux1 { 86 regulator-min-microvolt = <3000000>; 87 regulator-max-microvolt = <3000000>; 88}; 89 90&vaux4 { 91 regulator-min-microvolt = <1800000>; 92 regulator-max-microvolt = <1800000>; 93}; 94 95&mcbsp2 { 96 status = "okay"; 97}; 98 99&charger { 100 ti,bb-uvolt = <3200000>; 101 ti,bb-uamp = <150>; 102}; 103 104&gpmc { 105 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ 106 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ 107 108 ethernet@gpmc { 109 pinctrl-names = "default"; 110 pinctrl-0 = <&lan9221_pins>; 111 interrupt-parent = <&gpio5>; 112 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ 113 reg = <1 0 0xff>; 114 }; 115}; 116 117&vpll2 { 118 regulator-always-on; 119}; 120 121&dss { 122 status = "ok"; 123 vdds_dsi-supply = <&vpll2>; 124 vdda_video-supply = <&video_reg>; 125 pinctrl-names = "default"; 126 pinctrl-0 = <&dss_dpi_pins1>; 127 port { 128 dpi_out: endpoint { 129 remote-endpoint = <&lcd_in>; 130 data-lines = <16>; 131 }; 132 }; 133}; 134 135/ { 136 aliases { 137 display0 = &lcd0; 138 }; 139 140 video_reg: video_reg { 141 pinctrl-names = "default"; 142 pinctrl-0 = <&panel_pwr_pins>; 143 compatible = "regulator-fixed"; 144 regulator-name = "fixed-supply"; 145 regulator-min-microvolt = <3300000>; 146 regulator-max-microvolt = <3300000>; 147 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ 148 }; 149 150 lcd0: display { 151 compatible = "panel-dpi"; 152 label = "15"; 153 status = "okay"; 154 /* default-on; */ 155 pinctrl-names = "default"; 156 157 port { 158 lcd_in: endpoint { 159 remote-endpoint = <&dpi_out>; 160 }; 161 }; 162 163 panel-timing { 164 clock-frequency = <9000000>; 165 hactive = <480>; 166 vactive = <272>; 167 hfront-porch = <3>; 168 hback-porch = <2>; 169 hsync-len = <42>; 170 vback-porch = <3>; 171 vfront-porch = <4>; 172 vsync-len = <11>; 173 hsync-active = <0>; 174 vsync-active = <0>; 175 de-active = <1>; 176 pixelclk-active = <1>; 177 }; 178 }; 179 180 bl: backlight { 181 compatible = "pwm-backlight"; 182 pinctrl-names = "default"; 183 pinctrl-0 = <&backlight_pins>; 184 pwms = <&pwm10 0 5000000 0>; 185 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; 186 default-brightness-level = <7>; 187 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ 188 }; 189}; 190 191&mmc1 { 192 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; 193 pinctrl-names = "default"; 194 pinctrl-0 = <&mmc1_pins &mmc1_cd>; 195 cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */ 196 vmmc-supply = <&vmmc1>; 197 bus-width = <4>; 198 cap-power-off-card; 199}; 200 201&omap3_pmx_core { 202 gpio_key_pins: pinmux_gpio_key_pins { 203 pinctrl-single,pins = < 204 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ 205 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ 206 >; 207 }; 208 209 pwm_pins: pinmux_pwm_pins { 210 pinctrl-single,pins = < 211 OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ 212 >; 213 }; 214 215 led_pins: pinmux_led_pins { 216 pinctrl-single,pins = < 217 OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ 218 OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ 219 >; 220 }; 221 222 mmc1_pins: pinmux_mmc1_pins { 223 pinctrl-single,pins = < 224 OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ 225 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ 226 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ 227 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 228 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 229 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ 230 >; 231 }; 232 233 tsc2004_pins: pinmux_tsc2004_pins { 234 pinctrl-single,pins = < 235 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ 236 >; 237 }; 238 239 backlight_pins: pinmux_backlight_pins { 240 pinctrl-single,pins = < 241 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ 242 >; 243 }; 244 245 isp_pins: pinmux_isp_pins { 246 pinctrl-single,pins = < 247 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ 248 OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ 249 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ 250 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ 251 252 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ 253 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ 254 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ 255 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ 256 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ 257 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ 258 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ 259 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ 260 >; 261 }; 262 263 panel_pwr_pins: pinmux_panel_pwr_pins { 264 pinctrl-single,pins = < 265 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ 266 >; 267 }; 268 269 dss_dpi_pins1: pinmux_dss_dpi_pins1 { 270 pinctrl-single,pins = < 271 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ 272 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ 273 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ 274 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ 275 276 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ 277 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ 278 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ 279 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ 280 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ 281 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ 282 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ 283 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ 284 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ 285 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ 286 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ 287 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ 288 289 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ 290 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ 291 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ 292 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ 293 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ 294 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ 295 >; 296 }; 297}; 298 299&omap3_pmx_wkup { 300 gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { 301 pinctrl-single,pins = < 302 OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ 303 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ 304 >; 305 }; 306 307 lan9221_pins: pinmux_lan9221_pins { 308 pinctrl-single,pins = < 309 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ 310 >; 311 }; 312 313 mmc1_cd: pinmux_mmc1_cd { 314 pinctrl-single,pins = < 315 OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ 316 >; 317 }; 318}; 319 320&i2c2 { 321 mt9p031@48 { 322 compatible = "aptina,mt9p031"; 323 reg = <0x48>; 324 clocks = <&isp 0>; 325 vaa-supply = <&vaux4>; 326 vdd-supply = <&vaux4>; 327 vdd_io-supply = <&vaux4>; 328 port { 329 mt9p031_out: endpoint { 330 input-clock-frequency = <24000000>; 331 pixel-clock-frequency = <72000000>; 332 remote-endpoint = <&ccdc_ep>; 333 }; 334 }; 335 }; 336}; 337 338&i2c3 { 339 touchscreen: tsc2004@48 { 340 compatible = "ti,tsc2004"; 341 reg = <0x48>; 342 vio-supply = <&vaux1>; 343 pinctrl-names = "default"; 344 pinctrl-0 = <&tsc2004_pins>; 345 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ 346 347 touchscreen-fuzz-x = <4>; 348 touchscreen-fuzz-y = <7>; 349 touchscreen-fuzz-pressure = <2>; 350 touchscreen-size-x = <4096>; 351 touchscreen-size-y = <4096>; 352 touchscreen-max-pressure = <2048>; 353 354 ti,x-plate-ohms = <280>; 355 ti,esd-recovery-timeout-ms = <8000>; 356 }; 357}; 358 359&mcspi1 { 360 at25@0 { 361 compatible = "atmel,at25"; 362 reg = <0>; 363 spi-max-frequency = <5000000>; 364 spi-cpha; 365 spi-cpol; 366 367 pagesize = <64>; 368 size = <32768>; 369 address-width = <16>; 370 }; 371}; 372 373&isp { 374 pinctrl-names = "default"; 375 pinctrl-0 = <&isp_pins>; 376 ports { 377 port@0 { 378 reg = <0>; 379 ccdc_ep: endpoint { 380 remote-endpoint = <&mt9p031_out>; 381 bus-width = <8>; 382 hsync-active = <1>; 383 vsync-active = <1>; 384 pclk-sample = <0>; 385 }; 386 }; 387 }; 388}; 389 390&uart1 { 391 interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; 392}; 393 394/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ 395&usb_otg_hs { 396 pinctrl-names = "default"; 397 pinctrl-0 = <&hsusb_otg_pins>; 398 interface-type = <0>; 399 usb-phy = <&usb2_phy>; 400 phys = <&usb2_phy>; 401 phy-names = "usb2-phy"; 402 mode = <3>; 403 power = <50>; 404}; 405