1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8	model = "Globalscale Technologies Dreamplug";
9	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11	memory {
12		device_type = "memory";
13		reg = <0x00000000 0x20000000>;
14	};
15
16	chosen {
17		bootargs = "console=ttyS0,115200n8 earlyprintk";
18		stdout-path = &uart0;
19	};
20
21	ocp@f1000000 {
22		pinctrl: pin-controller@10000 {
23			pmx_led_bluetooth: pmx-led-bluetooth {
24				marvell,pins = "mpp47";
25				marvell,function = "gpio";
26			};
27			pmx_led_wifi: pmx-led-wifi {
28				marvell,pins = "mpp48";
29				marvell,function = "gpio";
30			};
31			pmx_led_wifi_ap: pmx-led-wifi-ap {
32				marvell,pins = "mpp49";
33				marvell,function = "gpio";
34			};
35		};
36		serial@12000 {
37			status = "ok";
38		};
39
40		spi@10600 {
41			status = "okay";
42
43			m25p40@0 {
44				#address-cells = <1>;
45				#size-cells = <1>;
46				compatible = "mxicy,mx25l1606e", "jedec,spi-nor", "spi-flash";
47				reg = <0>;
48				spi-max-frequency = <50000000>;
49				mode = <0>;
50
51				partition@0 {
52					reg = <0x0 0x80000>;
53					label = "u-boot";
54				};
55
56				partition@100000 {
57					reg = <0x100000 0x10000>;
58					label = "u-boot env";
59				};
60
61				partition@180000 {
62					reg = <0x180000 0x10000>;
63					label = "dtb";
64				};
65			};
66		};
67
68		sata@80000 {
69			status = "okay";
70			nr-ports = <1>;
71		};
72
73		mvsdio@90000 {
74			pinctrl-0 = <&pmx_sdio>;
75			pinctrl-names = "default";
76			status = "okay";
77			/* No CD or WP GPIOs */
78			broken-cd;
79		};
80	};
81
82	gpio-leds {
83		compatible = "gpio-leds";
84		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
85			     &pmx_led_wifi_ap >;
86		pinctrl-names = "default";
87
88		bluetooth {
89			label = "dreamplug:blue:bluetooth";
90			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
91		};
92		wifi {
93			label = "dreamplug:green:wifi";
94			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
95		};
96		wifi-ap {
97			label = "dreamplug:green:wifi_ap";
98			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
99		};
100	};
101};
102
103&mdio {
104	status = "okay";
105
106	ethphy0: ethernet-phy@0 {
107		reg = <0>;
108	};
109
110	ethphy1: ethernet-phy@1 {
111		reg = <1>;
112	};
113};
114
115&eth0 {
116	status = "okay";
117	ethernet0-port@0 {
118		phy-handle = <&ethphy0>;
119	};
120};
121
122&eth1 {
123	status = "okay";
124	ethernet1-port@0 {
125		phy-handle = <&ethphy1>;
126	};
127};
128