1// SPDX-License-Identifier: GPL-2.0 2/ { 3 mbus@f1000000 { 4 pciec: pcie@82000000 { 5 compatible = "marvell,kirkwood-pcie"; 6 status = "disabled"; 7 device_type = "pci"; 8 9 #address-cells = <3>; 10 #size-cells = <2>; 11 12 bus-range = <0x00 0xff>; 13 14 ranges = 15 <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 16 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 17 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; 18 19 pcie0: pcie@1,0 { 20 device_type = "pci"; 21 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; 22 reg = <0x0800 0 0 0 0>; 23 #address-cells = <3>; 24 #size-cells = <2>; 25 #interrupt-cells = <1>; 26 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 27 0x81000000 0 0 0x81000000 0x1 0 1 0>; 28 bus-range = <0x00 0xff>; 29 interrupt-map-mask = <0 0 0 0>; 30 interrupt-map = <0 0 0 0 &intc 9>; 31 marvell,pcie-port = <0>; 32 marvell,pcie-lane = <0>; 33 clocks = <&gate_clk 2>; 34 status = "disabled"; 35 }; 36 }; 37 }; 38 39 ocp@f1000000 { 40 pinctrl: pin-controller@10000 { 41 compatible = "marvell,88f6281-pinctrl"; 42 43 pmx_sata0: pmx-sata0 { 44 marvell,pins = "mpp5", "mpp21", "mpp23"; 45 marvell,function = "sata0"; 46 }; 47 pmx_sata1: pmx-sata1 { 48 marvell,pins = "mpp4", "mpp20", "mpp22"; 49 marvell,function = "sata1"; 50 }; 51 pmx_sdio: pmx-sdio { 52 marvell,pins = "mpp12", "mpp13", "mpp14", 53 "mpp15", "mpp16", "mpp17"; 54 marvell,function = "sdio"; 55 }; 56 }; 57 58 rtc: rtc@10300 { 59 compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; 60 reg = <0x10300 0x20>; 61 interrupts = <53>; 62 clocks = <&gate_clk 7>; 63 }; 64 65 sata: sata@80000 { 66 compatible = "marvell,orion-sata"; 67 reg = <0x80000 0x5000>; 68 interrupts = <21>; 69 clocks = <&gate_clk 14>, <&gate_clk 15>; 70 clock-names = "0", "1"; 71 phys = <&sata_phy0>, <&sata_phy1>; 72 phy-names = "port0", "port1"; 73 status = "disabled"; 74 }; 75 76 sdio: mvsdio@90000 { 77 compatible = "marvell,orion-sdio"; 78 reg = <0x90000 0x200>; 79 interrupts = <28>; 80 clocks = <&gate_clk 4>; 81 pinctrl-0 = <&pmx_sdio>; 82 pinctrl-names = "default"; 83 bus-width = <4>; 84 cap-sdio-irq; 85 cap-sd-highspeed; 86 cap-mmc-highspeed; 87 status = "disabled"; 88 }; 89 }; 90}; 91