xref: /openbmc/u-boot/arch/arm/dts/imx7d-sdb.dts (revision 9d466f2f)
1/*
2 * Copyright 2017 NXP
3 *
4 * SPDX-License-Identifier:	GPL-2.0+
5 */
6
7/dts-v1/;
8
9#include "imx7d.dtsi"
10
11/ {
12	model = "Freescale i.MX7 SabreSD Board";
13	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
14
15	memory {
16		reg = <0x80000000 0x80000000>;
17	};
18
19	spi4 {
20		compatible = "spi-gpio";
21		pinctrl-names = "default";
22		pinctrl-0 = <&pinctrl_spi1>;
23		status = "okay";
24		gpio-sck = <&gpio1 13 0>;
25		gpio-mosi = <&gpio1 9 0>;
26		cs-gpios = <&gpio1 12 0>;
27		num-chipselects = <1>;
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		gpio_spi: gpio_spi@0 {
32			compatible = "fairchild,74hc595";
33			gpio-controller;
34			#gpio-cells = <2>;
35			reg = <0>;
36			registers-number = <1>;
37			registers-default = /bits/ 8 <0x74>; /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/
38			spi-max-frequency = <100000>;
39		};
40	};
41
42	regulators {
43		compatible = "simple-bus";
44		#address-cells = <1>;
45		#size-cells = <0>;
46
47		reg_usb_otg1_vbus: regulator@0 {
48			compatible = "regulator-fixed";
49			reg = <0>;
50			regulator-name = "usb_otg1_vbus";
51			regulator-min-microvolt = <5000000>;
52			regulator-max-microvolt = <5000000>;
53			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
54			enable-active-high;
55		};
56
57		reg_usb_otg2_vbus: regulator@1 {
58			compatible = "regulator-fixed";
59			reg = <1>;
60			regulator-name = "usb_otg2_vbus";
61			regulator-min-microvolt = <5000000>;
62			regulator-max-microvolt = <5000000>;
63			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
64			enable-active-high;
65		};
66
67		reg_sd1_vmmc: regulator@3 {
68			compatible = "regulator-fixed";
69			regulator-name = "VDD_SD1";
70			regulator-min-microvolt = <3300000>;
71			regulator-max-microvolt = <3300000>;
72			gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
73			startup-delay-us = <200000>;
74			enable-active-high;
75		};
76	};
77};
78
79&iomuxc {
80	imx7d-sdb {
81		pinctrl_spi1: spi1grp {
82			fsl,pins = <
83				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
84				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
85				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
86			>;
87		};
88
89		pinctrl_i2c1: i2c1grp {
90			fsl,pins = <
91				MX7D_PAD_I2C1_SDA__I2C1_SDA	0x4000007f
92				MX7D_PAD_I2C1_SCL__I2C1_SCL	0x4000007f
93			>;
94		};
95
96		pinctrl_i2c2: i2c2grp {
97			fsl,pins = <
98				MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
99				MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
100			>;
101		};
102
103		pinctrl_i2c3: i2c3grp {
104			fsl,pins = <
105				MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
106				MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
107			>;
108		};
109
110		pinctrl_i2c4: i2c4grp {
111			fsl,pins = <
112				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA	0x4000007f
113				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL	0x4000007f
114			>;
115		};
116
117		pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
118			fsl,pins = <
119				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
120				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
121				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
122				MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
123			>;
124		};
125
126		pinctrl_usdhc1: usdhc1grp {
127			fsl,pins = <
128				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
129				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
130				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
131				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
132				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
133				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
134			>;
135		};
136
137		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
138			fsl,pins = <
139				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
140				MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
141				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
142				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
143				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
144				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
145			>;
146		};
147
148		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
149			fsl,pins = <
150				MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
151				MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
152				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
153				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
154				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
155				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
156			>;
157		};
158
159		pinctrl_usdhc2: usdhc2grp {
160			fsl,pins = <
161				MX7D_PAD_SD2_CMD__SD2_CMD       0x59
162				MX7D_PAD_SD2_CLK__SD2_CLK       0x19
163				MX7D_PAD_SD2_DATA0__SD2_DATA0   0x59
164				MX7D_PAD_SD2_DATA1__SD2_DATA1   0x59
165				MX7D_PAD_SD2_DATA2__SD2_DATA2   0x59
166				MX7D_PAD_SD2_DATA3__SD2_DATA3   0x59
167				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x19 /* WL_REG_ON */
168				MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x19 /* WL_HOST_WAKE */
169			>;
170		};
171
172		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
173			fsl,pins = <
174				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
175				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
176				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
177				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
178				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
179				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
180			>;
181		};
182
183		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
184			fsl,pins = <
185				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
186				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
187				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
188				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
189				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
190				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
191			>;
192		};
193
194		pinctrl_usdhc3: usdhc3grp {
195			fsl,pins = <
196				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
197				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
198				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
199				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
200				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
201				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
202				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
203				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
204				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
205				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
206				MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
207			>;
208		};
209
210		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
211			fsl,pins = <
212				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
213				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
214				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
215				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
216				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
217				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
218				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
219				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
220				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
221				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
222				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
223			>;
224		};
225
226		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
227			fsl,pins = <
228				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
229				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
230				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
231				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
232				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
233				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
234				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
235				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
236				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
237				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
238				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
239			>;
240		};
241	};
242};
243
244&i2c1 {
245	clock-frequency = <100000>;
246	pinctrl-names = "default";
247	pinctrl-0 = <&pinctrl_i2c1>;
248	status = "okay";
249
250	pmic: pfuze3000@08 {
251		compatible = "fsl,pfuze3000";
252		reg = <0x08>;
253
254		regulators {
255			sw1a_reg: sw1a {
256				regulator-min-microvolt = <700000>;
257				regulator-max-microvolt = <3300000>;
258				regulator-boot-on;
259				regulator-always-on;
260				regulator-ramp-delay = <6250>;
261			};
262
263			/* use sw1c_reg to align with pfuze100/pfuze200 */
264			sw1c_reg: sw1b {
265				regulator-min-microvolt = <700000>;
266				regulator-max-microvolt = <1475000>;
267				regulator-boot-on;
268				regulator-always-on;
269				regulator-ramp-delay = <6250>;
270			};
271
272			sw2_reg: sw2 {
273				regulator-min-microvolt = <1500000>;
274				regulator-max-microvolt = <1850000>;
275				regulator-boot-on;
276				regulator-always-on;
277			};
278
279			sw3a_reg: sw3 {
280				regulator-min-microvolt = <900000>;
281				regulator-max-microvolt = <1650000>;
282				regulator-boot-on;
283				regulator-always-on;
284			};
285
286			swbst_reg: swbst {
287				regulator-min-microvolt = <5000000>;
288				regulator-max-microvolt = <5150000>;
289			};
290
291			snvs_reg: vsnvs {
292				regulator-min-microvolt = <1000000>;
293				regulator-max-microvolt = <3000000>;
294				regulator-boot-on;
295				regulator-always-on;
296			};
297
298			vref_reg: vrefddr {
299				regulator-boot-on;
300				regulator-always-on;
301			};
302
303			vgen1_reg: vldo1 {
304				regulator-min-microvolt = <1800000>;
305				regulator-max-microvolt = <3300000>;
306				regulator-always-on;
307			};
308
309			vgen2_reg: vldo2 {
310				regulator-min-microvolt = <800000>;
311				regulator-max-microvolt = <1550000>;
312				regulator-always-on;
313			};
314
315			vgen3_reg: vccsd {
316				regulator-min-microvolt = <2850000>;
317				regulator-max-microvolt = <3300000>;
318				regulator-always-on;
319			};
320
321			vgen4_reg: v33 {
322				regulator-min-microvolt = <2850000>;
323				regulator-max-microvolt = <3300000>;
324				regulator-always-on;
325			};
326
327			vgen5_reg: vldo3 {
328				regulator-min-microvolt = <1800000>;
329				regulator-max-microvolt = <3300000>;
330				regulator-always-on;
331			};
332
333			vgen6_reg: vldo4 {
334				regulator-min-microvolt = <1800000>;
335				regulator-max-microvolt = <3300000>;
336				regulator-always-on;
337			};
338		};
339	};
340};
341
342&i2c2 {
343	clock-frequency = <100000>;
344	pinctrl-names = "default";
345	pinctrl-0 = <&pinctrl_i2c2>;
346	status = "okay";
347};
348
349&i2c3 {
350	clock-frequency = <100000>;
351	pinctrl-names = "default";
352	pinctrl-0 = <&pinctrl_i2c3>;
353	status = "okay";
354};
355
356&i2c4 {
357	clock-frequency = <100000>;
358	pinctrl-names = "default";
359	pinctrl-0 = <&pinctrl_i2c4>;
360	status = "okay";
361};
362
363&usdhc1 {
364	pinctrl-names = "default", "state_100mhz", "state_200mhz";
365	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
366	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
367	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
368	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
369	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
370	vmmc-supply = <&reg_sd1_vmmc>;
371	fsl,tuning-start-tap = <20>;
372	fsl,tuning-step= <2>;
373	status = "okay";
374};
375
376&usdhc2 {
377	pinctrl-names = "default", "state_100mhz", "state_200mhz";
378	pinctrl-0 = <&pinctrl_usdhc2>;
379	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
380	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
381	non-removable;
382	fsl,tuning-start-tap = <20>;
383	fsl,tuning-step= <2>;
384	status = "okay";
385};
386
387&usdhc3 {
388	pinctrl-names = "default", "state_100mhz", "state_200mhz";
389	pinctrl-0 = <&pinctrl_usdhc3>;
390	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
391	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
392	bus-width = <8>;
393	non-removable;
394	fsl,tuning-start-tap = <20>;
395	fsl,tuning-step= <2>;
396	status = "okay";
397};
398