xref: /openbmc/u-boot/arch/arm/dts/imx7d-sdb.dts (revision 87a62bce)
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2017 NXP
4 */
5
6/dts-v1/;
7
8#include "imx7d.dtsi"
9
10/ {
11	model = "Freescale i.MX7 SabreSD Board";
12	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
13
14	memory {
15		reg = <0x80000000 0x80000000>;
16	};
17
18	spi4 {
19		compatible = "spi-gpio";
20		pinctrl-names = "default";
21		pinctrl-0 = <&pinctrl_spi1>;
22		status = "okay";
23		gpio-sck = <&gpio1 13 0>;
24		gpio-mosi = <&gpio1 9 0>;
25		cs-gpios = <&gpio1 12 0>;
26		num-chipselects = <1>;
27		#address-cells = <1>;
28		#size-cells = <0>;
29
30		gpio_spi: gpio_spi@0 {
31			compatible = "fairchild,74hc595";
32			gpio-controller;
33			#gpio-cells = <2>;
34			reg = <0>;
35			registers-number = <1>;
36			registers-default = /bits/ 8 <0x74>; /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/
37			spi-max-frequency = <100000>;
38		};
39	};
40
41	regulators {
42		compatible = "simple-bus";
43		#address-cells = <1>;
44		#size-cells = <0>;
45
46		reg_usb_otg1_vbus: regulator@0 {
47			compatible = "regulator-fixed";
48			reg = <0>;
49			regulator-name = "usb_otg1_vbus";
50			regulator-min-microvolt = <5000000>;
51			regulator-max-microvolt = <5000000>;
52			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
53			enable-active-high;
54		};
55
56		reg_usb_otg2_vbus: regulator@1 {
57			compatible = "regulator-fixed";
58			reg = <1>;
59			regulator-name = "usb_otg2_vbus";
60			regulator-min-microvolt = <5000000>;
61			regulator-max-microvolt = <5000000>;
62			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
63			enable-active-high;
64		};
65
66		reg_sd1_vmmc: regulator@3 {
67			compatible = "regulator-fixed";
68			regulator-name = "VDD_SD1";
69			regulator-min-microvolt = <3300000>;
70			regulator-max-microvolt = <3300000>;
71			gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
72			startup-delay-us = <200000>;
73			enable-active-high;
74		};
75	};
76};
77
78&iomuxc {
79	imx7d-sdb {
80		pinctrl_spi1: spi1grp {
81			fsl,pins = <
82				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
83				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
84				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
85			>;
86		};
87
88		pinctrl_i2c1: i2c1grp {
89			fsl,pins = <
90				MX7D_PAD_I2C1_SDA__I2C1_SDA	0x4000007f
91				MX7D_PAD_I2C1_SCL__I2C1_SCL	0x4000007f
92			>;
93		};
94
95		pinctrl_i2c2: i2c2grp {
96			fsl,pins = <
97				MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
98				MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
99			>;
100		};
101
102		pinctrl_i2c3: i2c3grp {
103			fsl,pins = <
104				MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
105				MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
106			>;
107		};
108
109		pinctrl_i2c4: i2c4grp {
110			fsl,pins = <
111				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA	0x4000007f
112				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL	0x4000007f
113			>;
114		};
115
116		pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
117			fsl,pins = <
118				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
119				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
120				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
121				MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
122			>;
123		};
124
125		pinctrl_usdhc1: usdhc1grp {
126			fsl,pins = <
127				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
128				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
129				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
130				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
131				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
132				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
133			>;
134		};
135
136		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
137			fsl,pins = <
138				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
139				MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
140				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
141				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
142				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
143				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
144			>;
145		};
146
147		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
148			fsl,pins = <
149				MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
150				MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
151				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
152				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
153				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
154				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
155			>;
156		};
157
158		pinctrl_usdhc2: usdhc2grp {
159			fsl,pins = <
160				MX7D_PAD_SD2_CMD__SD2_CMD       0x59
161				MX7D_PAD_SD2_CLK__SD2_CLK       0x19
162				MX7D_PAD_SD2_DATA0__SD2_DATA0   0x59
163				MX7D_PAD_SD2_DATA1__SD2_DATA1   0x59
164				MX7D_PAD_SD2_DATA2__SD2_DATA2   0x59
165				MX7D_PAD_SD2_DATA3__SD2_DATA3   0x59
166				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x19 /* WL_REG_ON */
167				MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x19 /* WL_HOST_WAKE */
168			>;
169		};
170
171		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
172			fsl,pins = <
173				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
174				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
175				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
176				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
177				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
178				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
179			>;
180		};
181
182		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
183			fsl,pins = <
184				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
185				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
186				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
187				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
188				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
189				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
190			>;
191		};
192
193		pinctrl_usdhc3: usdhc3grp {
194			fsl,pins = <
195				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
196				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
197				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
198				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
199				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
200				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
201				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
202				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
203				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
204				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
205				MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
206			>;
207		};
208
209		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
210			fsl,pins = <
211				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
212				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
213				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
214				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
215				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
216				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
217				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
218				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
219				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
220				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
221				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
222			>;
223		};
224
225		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
226			fsl,pins = <
227				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
228				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
229				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
230				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
231				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
232				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
233				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
234				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
235				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
236				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
237				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
238			>;
239		};
240	};
241};
242
243&i2c1 {
244	clock-frequency = <100000>;
245	pinctrl-names = "default";
246	pinctrl-0 = <&pinctrl_i2c1>;
247	status = "okay";
248
249	pmic: pfuze3000@08 {
250		compatible = "fsl,pfuze3000";
251		reg = <0x08>;
252
253		regulators {
254			sw1a_reg: sw1a {
255				regulator-min-microvolt = <700000>;
256				regulator-max-microvolt = <3300000>;
257				regulator-boot-on;
258				regulator-always-on;
259				regulator-ramp-delay = <6250>;
260			};
261
262			/* use sw1c_reg to align with pfuze100/pfuze200 */
263			sw1c_reg: sw1b {
264				regulator-min-microvolt = <700000>;
265				regulator-max-microvolt = <1475000>;
266				regulator-boot-on;
267				regulator-always-on;
268				regulator-ramp-delay = <6250>;
269			};
270
271			sw2_reg: sw2 {
272				regulator-min-microvolt = <1500000>;
273				regulator-max-microvolt = <1850000>;
274				regulator-boot-on;
275				regulator-always-on;
276			};
277
278			sw3a_reg: sw3 {
279				regulator-min-microvolt = <900000>;
280				regulator-max-microvolt = <1650000>;
281				regulator-boot-on;
282				regulator-always-on;
283			};
284
285			swbst_reg: swbst {
286				regulator-min-microvolt = <5000000>;
287				regulator-max-microvolt = <5150000>;
288			};
289
290			snvs_reg: vsnvs {
291				regulator-min-microvolt = <1000000>;
292				regulator-max-microvolt = <3000000>;
293				regulator-boot-on;
294				regulator-always-on;
295			};
296
297			vref_reg: vrefddr {
298				regulator-boot-on;
299				regulator-always-on;
300			};
301
302			vgen1_reg: vldo1 {
303				regulator-min-microvolt = <1800000>;
304				regulator-max-microvolt = <3300000>;
305				regulator-always-on;
306			};
307
308			vgen2_reg: vldo2 {
309				regulator-min-microvolt = <800000>;
310				regulator-max-microvolt = <1550000>;
311				regulator-always-on;
312			};
313
314			vgen3_reg: vccsd {
315				regulator-min-microvolt = <2850000>;
316				regulator-max-microvolt = <3300000>;
317				regulator-always-on;
318			};
319
320			vgen4_reg: v33 {
321				regulator-min-microvolt = <2850000>;
322				regulator-max-microvolt = <3300000>;
323				regulator-always-on;
324			};
325
326			vgen5_reg: vldo3 {
327				regulator-min-microvolt = <1800000>;
328				regulator-max-microvolt = <3300000>;
329				regulator-always-on;
330			};
331
332			vgen6_reg: vldo4 {
333				regulator-min-microvolt = <1800000>;
334				regulator-max-microvolt = <3300000>;
335				regulator-always-on;
336			};
337		};
338	};
339};
340
341&i2c2 {
342	clock-frequency = <100000>;
343	pinctrl-names = "default";
344	pinctrl-0 = <&pinctrl_i2c2>;
345	status = "okay";
346};
347
348&i2c3 {
349	clock-frequency = <100000>;
350	pinctrl-names = "default";
351	pinctrl-0 = <&pinctrl_i2c3>;
352	status = "okay";
353};
354
355&i2c4 {
356	clock-frequency = <100000>;
357	pinctrl-names = "default";
358	pinctrl-0 = <&pinctrl_i2c4>;
359	status = "okay";
360};
361
362&usdhc1 {
363	pinctrl-names = "default", "state_100mhz", "state_200mhz";
364	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
365	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
366	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
367	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
368	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
369	vmmc-supply = <&reg_sd1_vmmc>;
370	fsl,tuning-start-tap = <20>;
371	fsl,tuning-step= <2>;
372	status = "okay";
373};
374
375&usdhc2 {
376	pinctrl-names = "default", "state_100mhz", "state_200mhz";
377	pinctrl-0 = <&pinctrl_usdhc2>;
378	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
379	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
380	non-removable;
381	fsl,tuning-start-tap = <20>;
382	fsl,tuning-step= <2>;
383	status = "okay";
384};
385
386&usdhc3 {
387	pinctrl-names = "default", "state_100mhz", "state_200mhz";
388	pinctrl-0 = <&pinctrl_usdhc3>;
389	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
390	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
391	bus-width = <8>;
392	non-removable;
393	fsl,tuning-start-tap = <20>;
394	fsl,tuning-step= <2>;
395	status = "okay";
396};
397