xref: /openbmc/u-boot/arch/arm/dts/imx6ul-geam.dts (revision 95963679)
1/*
2 * Copyright (C) 2016 Amarula Solutions B.V.
3 * Copyright (C) 2016 Engicam S.r.l.
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 *  a) This file is free software; you can redistribute it and/or
11 *     modify it under the terms of the GNU General Public License
12 *     version 2 as published by the Free Software Foundation.
13 *
14 *     This file is distributed in the hope that it will be useful
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44
45#include <dt-bindings/gpio/gpio.h>
46#include <dt-bindings/input/input.h>
47#include "imx6ul.dtsi"
48
49/ {
50	model = "Engicam GEAM6UL";
51	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
52
53	memory {
54		reg = <0x80000000 0x08000000>;
55	};
56
57	chosen {
58		stdout-path = &uart1;
59	};
60};
61
62&fec1 {
63	pinctrl-names = "default";
64	pinctrl-0 = <&pinctrl_enet1>;
65	phy-mode = "rmii";
66	status = "okay";
67};
68
69&i2c1 {
70	clock-frequency = <100000>;
71	pinctrl-names = "default";
72	pinctrl-0 = <&pinctrl_i2c1>;
73	status = "okay";
74};
75
76&i2c2 {
77	clock_frequency = <100000>;
78	pinctrl-names = "default";
79	pinctrl-0 = <&pinctrl_i2c2>;
80	status = "okay";
81};
82
83&uart1 {
84	pinctrl-names = "default";
85	pinctrl-0 = <&pinctrl_uart1>;
86	status = "okay";
87};
88
89&usdhc1 {
90	pinctrl-names = "default", "state_100mhz", "state_200mhz";
91	pinctrl-0 = <&pinctrl_usdhc1>;
92	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
93	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
94	bus-width = <4>;
95	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
96	no-1-8-v;
97	status = "okay";
98};
99
100&iomuxc {
101	pinctrl_enet1: enet1grp {
102		fsl,pins = <
103			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
104			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
105			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
106			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
107			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
108			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
109			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
110			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
111			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
112		>;
113	};
114
115	pinctrl_i2c1: i2c1grp {
116		fsl,pins = <
117			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
118			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
119		>;
120	};
121
122	pinctrl_i2c2: i2c2grp {
123			fsl,pins = <
124			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
125			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
126		>;
127	};
128
129	pinctrl_uart1: uart1grp {
130		fsl,pins = <
131			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
132			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
133		>;
134	};
135
136	pinctrl_usdhc1: usdhc1grp {
137		fsl,pins = <
138			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
139			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
140			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
141			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
142			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
143			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
144		>;
145	};
146
147	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
148		fsl,pins = <
149			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
150			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
151			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
152			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
153			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
154			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
155		>;
156	};
157
158	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
159		fsl,pins = <
160			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
161			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
162			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
163			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
164			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
165			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
166		>;
167	};
168};
169