xref: /openbmc/u-boot/arch/arm/dts/hi3798cv200.dtsi (revision ae485b54)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * DTS File for HiSilicon Hi3798cv200 SoC.
4 *
5 * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
6 */
7
8#include <dt-bindings/clock/histb-clock.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/reset/ti-syscon.h>
11
12/ {
13	compatible = "hisilicon,hi3798cv200";
14	interrupt-parent = <&gic>;
15	#address-cells = <2>;
16	#size-cells = <2>;
17
18	psci {
19		compatible = "arm,psci-0.2";
20		method = "smc";
21	};
22
23	cpus {
24		#address-cells = <2>;
25		#size-cells = <0>;
26
27		cpu@0 {
28			compatible = "arm,cortex-a53";
29			device_type = "cpu";
30			reg = <0x0 0x0>;
31			enable-method = "psci";
32		};
33
34		cpu@1 {
35			compatible = "arm,cortex-a53";
36			device_type = "cpu";
37			reg = <0x0 0x1>;
38			enable-method = "psci";
39		};
40
41		cpu@2 {
42			compatible = "arm,cortex-a53";
43			device_type = "cpu";
44			reg = <0x0 0x2>;
45			enable-method = "psci";
46		};
47
48		cpu@3 {
49			compatible = "arm,cortex-a53";
50			device_type = "cpu";
51			reg = <0x0 0x3>;
52			enable-method = "psci";
53		};
54	};
55
56	gic: interrupt-controller@f1001000 {
57		compatible = "arm,gic-400";
58		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
59		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
60		#address-cells = <0>;
61		#interrupt-cells = <3>;
62		interrupt-controller;
63	};
64
65	timer {
66		compatible = "arm,armv8-timer";
67		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
68			      IRQ_TYPE_LEVEL_LOW)>,
69			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
70			      IRQ_TYPE_LEVEL_LOW)>,
71			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
72			      IRQ_TYPE_LEVEL_LOW)>,
73			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
74			      IRQ_TYPE_LEVEL_LOW)>;
75	};
76
77	soc: soc@f0000000 {
78		compatible = "simple-bus";
79		#address-cells = <1>;
80		#size-cells = <1>;
81		ranges = <0x0 0x0 0xf0000000 0x10000000>;
82
83		crg: clock-reset-controller@8a22000 {
84			compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
85			reg = <0x8a22000 0x1000>;
86			#clock-cells = <1>;
87			#reset-cells = <2>;
88
89			gmacphyrst: reset-controller {
90				compatible = "ti,syscon-reset";
91				#reset-cells = <1>;
92				ti,reset-bits =
93					<0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
94					 DEASSERT_SET|STATUS_NONE)>,
95					<0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
96					 DEASSERT_SET|STATUS_NONE)>;
97			};
98		};
99
100		sysctrl: system-controller@8000000 {
101			compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
102			reg = <0x8000000 0x1000>;
103			#clock-cells = <1>;
104			#reset-cells = <2>;
105		};
106
107		uart0: serial@8b00000 {
108			compatible = "arm,pl011", "arm,primecell";
109			reg = <0x8b00000 0x1000>;
110			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
111			clocks = <&sysctrl HISTB_UART0_CLK>;
112			clock-names = "apb_pclk";
113			status = "disabled";
114		};
115
116		uart2: serial@8b02000 {
117			compatible = "arm,pl011", "arm,primecell";
118			reg = <0x8b02000 0x1000>;
119			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
120			clocks = <&crg HISTB_UART2_CLK>;
121			clock-names = "apb_pclk";
122			status = "disabled";
123		};
124
125		i2c0: i2c@8b10000 {
126			compatible = "hisilicon,hix5hd2-i2c";
127			reg = <0x8b10000 0x1000>;
128			#address-cells = <1>;
129			#size-cells = <0>;
130			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
131			clock-frequency = <400000>;
132			clocks = <&crg HISTB_I2C0_CLK>;
133			status = "disabled";
134		};
135
136		i2c1: i2c@8b11000 {
137			compatible = "hisilicon,hix5hd2-i2c";
138			reg = <0x8b11000 0x1000>;
139			#address-cells = <1>;
140			#size-cells = <0>;
141			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
142			clock-frequency = <400000>;
143			clocks = <&crg HISTB_I2C1_CLK>;
144			status = "disabled";
145		};
146
147		i2c2: i2c@8b12000 {
148			compatible = "hisilicon,hix5hd2-i2c";
149			reg = <0x8b12000 0x1000>;
150			#address-cells = <1>;
151			#size-cells = <0>;
152			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
153			clock-frequency = <400000>;
154			clocks = <&crg HISTB_I2C2_CLK>;
155			status = "disabled";
156		};
157
158		i2c3: i2c@8b13000 {
159			compatible = "hisilicon,hix5hd2-i2c";
160			reg = <0x8b13000 0x1000>;
161			#address-cells = <1>;
162			#size-cells = <0>;
163			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
164			clock-frequency = <400000>;
165			clocks = <&crg HISTB_I2C3_CLK>;
166			status = "disabled";
167		};
168
169		i2c4: i2c@8b14000 {
170			compatible = "hisilicon,hix5hd2-i2c";
171			reg = <0x8b14000 0x1000>;
172			#address-cells = <1>;
173			#size-cells = <0>;
174			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
175			clock-frequency = <400000>;
176			clocks = <&crg HISTB_I2C4_CLK>;
177			status = "disabled";
178		};
179
180		spi0: spi@8b1a000 {
181			compatible = "arm,pl022", "arm,primecell";
182			reg = <0x8b1a000 0x1000>;
183			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
184			num-cs = <1>;
185			cs-gpios = <&gpio7 1 0>;
186			clocks = <&crg HISTB_SPI0_CLK>;
187			clock-names = "apb_pclk";
188			#address-cells = <1>;
189			#size-cells = <0>;
190			status = "disabled";
191		};
192
193		emmc: mmc@9830000 {
194			compatible = "snps,dw-mshc";
195			reg = <0x9830000 0x10000>;
196			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
197			clocks = <&crg HISTB_MMC_CIU_CLK>,
198				 <&crg HISTB_MMC_BIU_CLK>;
199			clock-names = "ciu", "biu";
200		};
201
202		gpio0: gpio@8b20000 {
203			compatible = "arm,pl061", "arm,primecell";
204			reg = <0x8b20000 0x1000>;
205			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
206			gpio-controller;
207			#gpio-cells = <2>;
208			interrupt-controller;
209			#interrupt-cells = <2>;
210			clocks = <&crg HISTB_APB_CLK>;
211			clock-names = "apb_pclk";
212			status = "disabled";
213		};
214
215		gpio1: gpio@8b21000 {
216			compatible = "arm,pl061", "arm,primecell";
217			reg = <0x8b21000 0x1000>;
218			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
219			gpio-controller;
220			#gpio-cells = <2>;
221			interrupt-controller;
222			#interrupt-cells = <2>;
223			clocks = <&crg HISTB_APB_CLK>;
224			clock-names = "apb_pclk";
225			status = "disabled";
226		};
227
228		gpio2: gpio@8b22000 {
229			compatible = "arm,pl061", "arm,primecell";
230			reg = <0x8b22000 0x1000>;
231			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
232			gpio-controller;
233			#gpio-cells = <2>;
234			interrupt-controller;
235			#interrupt-cells = <2>;
236			clocks = <&crg HISTB_APB_CLK>;
237			clock-names = "apb_pclk";
238			status = "disabled";
239		};
240
241		gpio3: gpio@8b23000 {
242			compatible = "arm,pl061", "arm,primecell";
243			reg = <0x8b23000 0x1000>;
244			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
245			gpio-controller;
246			#gpio-cells = <2>;
247			interrupt-controller;
248			#interrupt-cells = <2>;
249			clocks = <&crg HISTB_APB_CLK>;
250			clock-names = "apb_pclk";
251			status = "disabled";
252		};
253
254		gpio4: gpio@8b24000 {
255			compatible = "arm,pl061", "arm,primecell";
256			reg = <0x8b24000 0x1000>;
257			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
258			gpio-controller;
259			#gpio-cells = <2>;
260			interrupt-controller;
261			#interrupt-cells = <2>;
262			clocks = <&crg HISTB_APB_CLK>;
263			clock-names = "apb_pclk";
264			status = "disabled";
265		};
266
267		gpio5: gpio@8004000 {
268			compatible = "arm,pl061", "arm,primecell";
269			reg = <0x8004000 0x1000>;
270			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
271			gpio-controller;
272			#gpio-cells = <2>;
273			interrupt-controller;
274			#interrupt-cells = <2>;
275			clocks = <&crg HISTB_APB_CLK>;
276			clock-names = "apb_pclk";
277			status = "disabled";
278		};
279
280		gpio6: gpio@8b26000 {
281			compatible = "arm,pl061", "arm,primecell";
282			reg = <0x8b26000 0x1000>;
283			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
284			gpio-controller;
285			#gpio-cells = <2>;
286			interrupt-controller;
287			#interrupt-cells = <2>;
288			clocks = <&crg HISTB_APB_CLK>;
289			clock-names = "apb_pclk";
290			status = "disabled";
291		};
292
293		gpio7: gpio@8b27000 {
294			compatible = "arm,pl061", "arm,primecell";
295			reg = <0x8b27000 0x1000>;
296			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
297			gpio-controller;
298			#gpio-cells = <2>;
299			interrupt-controller;
300			#interrupt-cells = <2>;
301			clocks = <&crg HISTB_APB_CLK>;
302			clock-names = "apb_pclk";
303			status = "disabled";
304		};
305
306		gpio8: gpio@8b28000 {
307			compatible = "arm,pl061", "arm,primecell";
308			reg = <0x8b28000 0x1000>;
309			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
310			gpio-controller;
311			#gpio-cells = <2>;
312			interrupt-controller;
313			#interrupt-cells = <2>;
314			clocks = <&crg HISTB_APB_CLK>;
315			clock-names = "apb_pclk";
316			status = "disabled";
317		};
318
319		gpio9: gpio@8b29000 {
320			compatible = "arm,pl061", "arm,primecell";
321			reg = <0x8b29000 0x1000>;
322			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
323			gpio-controller;
324			#gpio-cells = <2>;
325			interrupt-controller;
326			#interrupt-cells = <2>;
327			clocks = <&crg HISTB_APB_CLK>;
328			clock-names = "apb_pclk";
329			status = "disabled";
330		};
331
332		gpio10: gpio@8b2a000 {
333			compatible = "arm,pl061", "arm,primecell";
334			reg = <0x8b2a000 0x1000>;
335			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
336			gpio-controller;
337			#gpio-cells = <2>;
338			interrupt-controller;
339			#interrupt-cells = <2>;
340			clocks = <&crg HISTB_APB_CLK>;
341			clock-names = "apb_pclk";
342			status = "disabled";
343		};
344
345		gpio11: gpio@8b2b000 {
346			compatible = "arm,pl061", "arm,primecell";
347			reg = <0x8b2b000 0x1000>;
348			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
349			gpio-controller;
350			#gpio-cells = <2>;
351			interrupt-controller;
352			#interrupt-cells = <2>;
353			clocks = <&crg HISTB_APB_CLK>;
354			clock-names = "apb_pclk";
355			status = "disabled";
356		};
357
358		gpio12: gpio@8b2c000 {
359			compatible = "arm,pl061", "arm,primecell";
360			reg = <0x8b2c000 0x1000>;
361			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
362			gpio-controller;
363			#gpio-cells = <2>;
364			interrupt-controller;
365			#interrupt-cells = <2>;
366			clocks = <&crg HISTB_APB_CLK>;
367			clock-names = "apb_pclk";
368			status = "disabled";
369		};
370
371		gmac0: ethernet@9840000 {
372			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
373			reg = <0x9840000 0x1000>,
374			      <0x984300c 0x4>;
375			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
376			clocks = <&crg HISTB_ETH0_MAC_CLK>,
377				 <&crg HISTB_ETH0_MACIF_CLK>;
378			clock-names = "mac_core", "mac_ifc";
379			resets = <&crg 0xcc 8>,
380				 <&crg 0xcc 10>,
381				 <&gmacphyrst 0>;
382			reset-names = "mac_core", "mac_ifc", "phy";
383			status = "disabled";
384		};
385
386		gmac1: ethernet@9841000 {
387			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
388			reg = <0x9841000 0x1000>,
389			      <0x9843010 0x4>;
390			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
391			clocks = <&crg HISTB_ETH1_MAC_CLK>,
392				 <&crg HISTB_ETH1_MACIF_CLK>;
393			clock-names = "mac_core", "mac_ifc";
394			resets = <&crg 0xcc 9>,
395				 <&crg 0xcc 11>,
396				 <&gmacphyrst 1>;
397			reset-names = "mac_core", "mac_ifc", "phy";
398			status = "disabled";
399		};
400
401		ir: ir@8001000 {
402			compatible = "hisilicon,hix5hd2-ir";
403			reg = <0x8001000 0x1000>;
404			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
405			clocks = <&sysctrl HISTB_IR_CLK>;
406			status = "disabled";
407		};
408	};
409};
410