xref: /openbmc/u-boot/arch/arm/dts/fsl-ls1012a.dtsi (revision 5c8fd32b)
1// SPDX-License-Identifier: GPL-2.0+ OR X11
2/*
3 * Copyright 2016 Freescale Semiconductor
4 */
5
6/include/ "skeleton64.dtsi"
7
8/ {
9	compatible = "fsl,ls1012a";
10	interrupt-parent = <&gic>;
11
12	sysclk: sysclk {
13		compatible = "fixed-clock";
14		#clock-cells = <0>;
15		clock-frequency = <100000000>;
16		clock-output-names = "sysclk";
17	};
18
19	gic: interrupt-controller@1400000 {
20		compatible = "arm,gic-400";
21		#interrupt-cells = <3>;
22		interrupt-controller;
23		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
24		      <0x0 0x1402000 0 0x2000>, /* GICC */
25		      <0x0 0x1404000 0 0x2000>, /* GICH */
26		      <0x0 0x1406000 0 0x2000>; /* GICV */
27		interrupts = <1 9 0xf08>;
28	};
29
30	soc {
31		compatible = "simple-bus";
32		#address-cells = <2>;
33		#size-cells = <2>;
34		ranges;
35
36		clockgen: clocking@1ee1000 {
37			compatible = "fsl,ls1012a-clockgen";
38			reg = <0x0 0x1ee1000 0x0 0x1000>;
39			#clock-cells = <2>;
40			clocks = <&sysclk>;
41		};
42
43		dspi0: dspi@2100000 {
44			compatible = "fsl,vf610-dspi";
45			#address-cells = <1>;
46			#size-cells = <0>;
47			reg = <0x0 0x2100000 0x0 0x10000>;
48			interrupts = <0 64 0x4>;
49			clock-names = "dspi";
50			clocks = <&clockgen 4 0>;
51			num-cs = <6>;
52			big-endian;
53			status = "disabled";
54		};
55
56		esdhc0: esdhc@1560000 {
57			compatible = "fsl,esdhc";
58			reg = <0x0 0x1560000 0x0 0x10000>;
59			interrupts = <0 62 0x4>;
60			big-endian;
61			bus-width = <4>;
62		};
63
64		esdhc1: esdhc@1580000 {
65			compatible = "fsl,esdhc";
66			reg = <0x0 0x1580000 0x0 0x10000>;
67			interrupts = <0 65 0x4>;
68			big-endian;
69			non-removable;
70			bus-width = <4>;
71		};
72
73		i2c0: i2c@2180000 {
74			compatible = "fsl,vf610-i2c";
75			#address-cells = <1>;
76			#size-cells = <0>;
77			reg = <0x0 0x2180000 0x0 0x10000>;
78			interrupts = <0 56 0x4>;
79			clock-names = "i2c";
80			clocks = <&clockgen 4 0>;
81			status = "disabled";
82		};
83
84		i2c1: i2c@2190000 {
85			compatible = "fsl,vf610-i2c";
86			#address-cells = <1>;
87			#size-cells = <0>;
88			reg = <0x0 0x2190000 0x0 0x10000>;
89			interrupts = <0 57 0x4>;
90			clock-names = "i2c";
91			clocks = <&clockgen 4 0>;
92			status = "disabled";
93		};
94
95		duart0: serial@21c0500 {
96			compatible = "fsl,ns16550", "ns16550a";
97			reg = <0x00 0x21c0500 0x0 0x100>;
98			interrupts = <0 54 0x4>;
99			clocks = <&clockgen 4 0>;
100		};
101
102		duart1: serial@21c0600 {
103			compatible = "fsl,ns16550", "ns16550a";
104			reg = <0x00 0x21c0600 0x0 0x100>;
105			interrupts = <0 54 0x4>;
106			clocks = <&clockgen 4 0>;
107		};
108
109		qspi: quadspi@1550000 {
110			compatible = "fsl,vf610-qspi";
111			#address-cells = <1>;
112			#size-cells = <0>;
113			reg = <0x0 0x1550000 0x0 0x10000>,
114				<0x0 0x40000000 0x0 0x4000000>;
115			reg-names = "QuadSPI", "QuadSPI-memory";
116			num-cs = <1>;
117			big-endian;
118			status = "disabled";
119		};
120
121		pcie@3400000 {
122			compatible = "fsl,ls-pcie", "snps,dw-pcie";
123			reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
124			       0x00 0x03480000 0x0 0x40000   /* lut registers */
125			       0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
126			       0x40 0x00000000 0x0 0x20000>; /* configuration space */
127			reg-names = "dbi", "lut", "ctrl", "config";
128			big-endian;
129			#address-cells = <3>;
130			#size-cells = <2>;
131			device_type = "pci";
132			bus-range = <0x0 0xff>;
133			ranges = <0x81000000 0x0 0x00000000 0x40 0x00020000 0x0 0x00010000   /* downstream I/O */
134				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
135		};
136
137		sata: sata@3200000 {
138			compatible = "fsl,ls1012a-ahci";
139			reg = <0x0 0x3200000 0x0 0x10000>;
140			interrupts = <0 69 4>;
141			clocks = <&clockgen 4 0>;
142			status = "disabled";
143		};
144
145		usb0: usb2@8600000 {
146			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
147			reg = <0x0 0x8600000 0x0 0x1000>;
148			interrupts = <0 139 0x4>;
149			dr_mode = "host";
150			fsl,usb-erratum-a005697;
151		};
152
153		usb1: usb3@2f00000 {
154			compatible = "fsl,layerscape-dwc3";
155			reg = <0x0 0x2f00000 0x0 0x10000>;
156			interrupts = <0 61 0x4>;
157			dr_mode = "host";
158		};
159	};
160};
161