1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2017-2018 NXP
4 */
5
6/dts-v1/;
7
8#include "fsl-imx8qxp.dtsi"
9
10/ {
11	model = "Freescale i.MX8QXP MEK";
12	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
13
14	chosen {
15		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
16		stdout-path = &lpuart0;
17	};
18
19	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
20		compatible = "regulator-fixed";
21		regulator-name = "SD1_SPWR";
22		regulator-min-microvolt = <3000000>;
23		regulator-max-microvolt = <3000000>;
24		gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
25		off-on-delay = <3480>;
26		enable-active-high;
27	};
28};
29
30&iomuxc {
31	pinctrl-names = "default";
32	pinctrl-0 = <&pinctrl_hog>;
33
34	imx8qxp-mek {
35		pinctrl_hog: hoggrp {
36			fsl,pins = <
37				SC_P_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x0600004c
38				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0
39			>;
40		};
41
42		pinctrl_ioexp_rst: ioexp-rst-grp {
43			fsl,pins = <
44				SC_P_SPI2_SDO_LSIO_GPIO1_IO01	0x06000021
45			>;
46		};
47
48		pinctrl_fec1: fec1grp {
49			fsl,pins = <
50				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000048
51				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000048
52				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000048
53				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x06000048
54				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x06000048
55				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x06000048
56				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x06000048
57				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x06000048
58				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x06000048
59				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000048
60				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x06000048
61				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x06000048
62				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x06000048
63				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x06000048
64			>;
65		};
66
67		pinctrl_fec2: fec2grp {
68			fsl,pins = <
69				SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x06000048
70				SC_P_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x06000048
71				SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0	0x06000048
72				SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1	0x06000048
73				SC_P_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x06000048
74				SC_P_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x06000048
75				SC_P_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x06000048
76				SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x06000048
77				SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x06000048
78				SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1	0x06000048
79				SC_P_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2	0x06000048
80				SC_P_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x06000048
81			>;
82		};
83
84		pinctrl_lpi2c1: lpi2c1grp {
85			fsl,pins = <
86				SC_P_USB_SS3_TC1_ADMA_I2C1_SCL	0x06000021
87				SC_P_USB_SS3_TC3_ADMA_I2C1_SDA	0x06000021
88			>;
89		};
90
91		pinctrl_lpuart0: lpuart0grp {
92			fsl,pins = <
93				SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
94				SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
95			>;
96		};
97
98		pinctrl_usdhc1: usdhc1grp {
99			fsl,pins = <
100				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
101				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
102				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
103				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
104				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
105				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
106				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
107				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
108				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
109				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
110				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
111			>;
112		};
113
114		pinctrl_usdhc2_gpio: usdhc2gpiogrp {
115			fsl,pins = <
116				SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000021
117				SC_P_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021
118				SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22	0x00000021
119			>;
120		};
121
122		pinctrl_usdhc2: usdhc2grp {
123			fsl,pins = <
124				SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
125				SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
126				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
127				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
128				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
129				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
130				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
131			>;
132		};
133	};
134};
135
136&A35_0 {
137	u-boot,dm-pre-reloc;
138};
139
140&lpuart0 {
141	pinctrl-names = "default";
142	pinctrl-0 = <&pinctrl_lpuart0>;
143	status = "okay";
144};
145
146&i2c1 {
147	clock-frequency = <100000>;
148	pinctrl-names = "default";
149	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
150	status = "okay";
151
152	i2cswitch@71 {
153		compatible = "nxp,pca9646";
154		reg = <0x71>;
155		#address-cells = <1>;
156		#size-cells = <0>;
157		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
158
159		bb_i2c1: i2c@0 {
160			#address-cells = <1>;
161			#size-cells = <0>;
162			reg = <0x0>;
163		};
164
165		mfi_i2c1: i2c@1 {
166			#address-cells = <1>;
167			#size-cells = <0>;
168			reg = <0x1>;
169		};
170
171		i2cexp1_i2c1: i2c@2 {
172			#address-cells = <1>;
173			#size-cells = <0>;
174			reg = <0x2>;
175		};
176
177		i2cexp2_i2c1: i2c@3 {
178			#address-cells = <1>;
179			#size-cells = <0>;
180			reg = <0x3>;
181
182			pca9557_a: gpio@1a {
183				compatible = "nxp,pca9557";
184				reg = <0x1a>;
185				gpio-controller;
186				#gpio-cells = <2>;
187			};
188			pca9557_b: gpio@1d {
189				compatible = "nxp,pca9557";
190				reg = <0x1d>;
191				gpio-controller;
192				#gpio-cells = <2>;
193			};
194		};
195	};
196};
197
198&usdhc1 {
199	pinctrl-names = "default";
200	pinctrl-0 = <&pinctrl_usdhc1>;
201	bus-width = <8>;
202	non-removable;
203	status = "okay";
204};
205
206&usdhc2 {
207	pinctrl-names = "default";
208	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
209	bus-width = <4>;
210	cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
211	wp-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
212	vmmc-supply = <&reg_usdhc2_vmmc>;
213	status = "okay";
214};
215
216&fec1 {
217	pinctrl-names = "default";
218	pinctrl-0 = <&pinctrl_fec1>;
219	phy-mode = "rgmii";
220	phy-handle = <&ethphy0>;
221	fsl,ar8031-phy-fixup;
222	fsl,magic-packet;
223	status = "okay";
224	phy-reset-gpios = <&pca9557_a 4 GPIO_ACTIVE_LOW>;
225	phy-reset-duration = <10>;
226
227	mdio {
228		#address-cells = <1>;
229		#size-cells = <0>;
230
231		ethphy0: ethernet-phy@0 {
232			compatible = "ethernet-phy-ieee802.3-c22";
233			reg = <0>;
234		};
235		ethphy1: ethernet-phy@1 {
236			compatible = "ethernet-phy-ieee802.3-c22";
237			reg = <1>;
238		};
239	};
240};
241