1/* 2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8/dts-v1/; 9 10#include "dra72x.dtsi" 11#include <dt-bindings/gpio/gpio.h> 12 13/ { 14 model = "TI DRA722"; 15 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; 16 17 chosen { 18 stdout-path = &uart1; 19 tick-timer = &timer2; 20 }; 21 22 memory { 23 device_type = "memory"; 24 reg = <0x80000000 0x40000000>; /* 1024 MB */ 25 }; 26 27 aliases { 28 display0 = &hdmi0; 29 }; 30 31 evm_3v3: fixedregulator-evm_3v3 { 32 compatible = "regulator-fixed"; 33 regulator-name = "evm_3v3"; 34 regulator-min-microvolt = <3300000>; 35 regulator-max-microvolt = <3300000>; 36 }; 37 38 extcon_usb1: extcon_usb1 { 39 compatible = "linux,extcon-usb-gpio"; 40 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; 41 }; 42 43 extcon_usb2: extcon_usb2 { 44 compatible = "linux,extcon-usb-gpio"; 45 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; 46 }; 47 48 hdmi0: connector { 49 compatible = "hdmi-connector"; 50 label = "hdmi"; 51 52 type = "a"; 53 54 port { 55 hdmi_connector_in: endpoint { 56 remote-endpoint = <&tpd12s015_out>; 57 }; 58 }; 59 }; 60 61 tpd12s015: encoder { 62 compatible = "ti,tpd12s015"; 63 64 pinctrl-names = "default"; 65 pinctrl-0 = <&tpd12s015_pins>; 66 67 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ 68 <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ 69 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ 70 71 ports { 72 #address-cells = <1>; 73 #size-cells = <0>; 74 75 port@0 { 76 reg = <0>; 77 78 tpd12s015_in: endpoint { 79 remote-endpoint = <&hdmi_out>; 80 }; 81 }; 82 83 port@1 { 84 reg = <1>; 85 86 tpd12s015_out: endpoint { 87 remote-endpoint = <&hdmi_connector_in>; 88 }; 89 }; 90 }; 91 }; 92}; 93 94&dra7_pmx_core { 95 i2c1_pins: pinmux_i2c1_pins { 96 pinctrl-single,pins = < 97 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ 98 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ 99 >; 100 }; 101 102 i2c5_pins: pinmux_i2c5_pins { 103 pinctrl-single,pins = < 104 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ 105 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ 106 >; 107 }; 108 109 nand_default: nand_default { 110 pinctrl-single,pins = < 111 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ 112 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ 113 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ 114 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ 115 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ 116 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ 117 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ 118 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ 119 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ 120 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ 121 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ 122 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ 123 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ 124 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ 125 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ 126 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ 127 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ 128 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ 129 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ 130 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ 131 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ 132 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ 133 >; 134 }; 135 136 usb1_pins: pinmux_usb1_pins { 137 pinctrl-single,pins = < 138 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ 139 >; 140 }; 141 142 usb2_pins: pinmux_usb2_pins { 143 pinctrl-single,pins = < 144 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ 145 >; 146 }; 147 148 tps65917_pins_default: tps65917_pins_default { 149 pinctrl-single,pins = < 150 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ 151 >; 152 }; 153 154 mmc1_pins_default: mmc1_pins_default { 155 pinctrl-single,pins = < 156 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ 157 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ 158 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ 159 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ 160 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ 161 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ 162 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ 163 >; 164 }; 165 166 mmc2_pins_default: mmc2_pins_default { 167 pinctrl-single,pins = < 168 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ 169 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ 170 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ 171 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ 172 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ 173 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ 174 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ 175 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ 176 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ 177 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ 178 >; 179 }; 180 181 dcan1_pins_default: dcan1_pins_default { 182 pinctrl-single,pins = < 183 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ 184 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ 185 >; 186 }; 187 188 dcan1_pins_sleep: dcan1_pins_sleep { 189 pinctrl-single,pins = < 190 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ 191 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ 192 >; 193 }; 194 195 qspi1_pins: pinmux_qspi1_pins { 196 pinctrl-single,pins = < 197 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ 198 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ 199 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ 200 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ 201 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ 202 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ 203 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ 204 >; 205 }; 206 207 hdmi_pins: pinmux_hdmi_pins { 208 pinctrl-single,pins = < 209 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ 210 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ 211 >; 212 }; 213 214 tpd12s015_pins: pinmux_tpd12s015_pins { 215 pinctrl-single,pins = < 216 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ 217 >; 218 }; 219}; 220 221&i2c1 { 222 status = "okay"; 223 pinctrl-names = "default"; 224 pinctrl-0 = <&i2c1_pins>; 225 clock-frequency = <400000>; 226 227 tps65917: tps65917@58 { 228 compatible = "ti,tps65917"; 229 reg = <0x58>; 230 231 pinctrl-names = "default"; 232 pinctrl-0 = <&tps65917_pins_default>; 233 234 interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ 235 interrupt-controller; 236 #interrupt-cells = <2>; 237 238 ti,system-power-controller; 239 240 tps65917_pmic { 241 compatible = "ti,tps65917-pmic"; 242 243 regulators { 244 smps1_reg: smps1 { 245 /* VDD_MPU */ 246 regulator-name = "smps1"; 247 regulator-min-microvolt = <850000>; 248 regulator-max-microvolt = <1250000>; 249 regulator-always-on; 250 regulator-boot-on; 251 }; 252 253 smps2_reg: smps2 { 254 /* VDD_CORE */ 255 regulator-name = "smps2"; 256 regulator-min-microvolt = <850000>; 257 regulator-max-microvolt = <1060000>; 258 regulator-boot-on; 259 regulator-always-on; 260 }; 261 262 smps3_reg: smps3 { 263 /* VDD_GPU IVA DSPEVE */ 264 regulator-name = "smps3"; 265 regulator-min-microvolt = <850000>; 266 regulator-max-microvolt = <1250000>; 267 regulator-boot-on; 268 regulator-always-on; 269 }; 270 271 smps4_reg: smps4 { 272 /* VDDS1V8 */ 273 regulator-name = "smps4"; 274 regulator-min-microvolt = <1800000>; 275 regulator-max-microvolt = <1800000>; 276 regulator-always-on; 277 regulator-boot-on; 278 }; 279 280 smps5_reg: smps5 { 281 /* VDD_DDR */ 282 regulator-name = "smps5"; 283 regulator-min-microvolt = <1350000>; 284 regulator-max-microvolt = <1350000>; 285 regulator-boot-on; 286 regulator-always-on; 287 }; 288 289 ldo1_reg: ldo1 { 290 /* LDO1_OUT --> SDIO */ 291 regulator-name = "ldo1"; 292 regulator-min-microvolt = <1800000>; 293 regulator-max-microvolt = <3300000>; 294 regulator-boot-on; 295 }; 296 297 ldo2_reg: ldo2 { 298 /* LDO2_OUT --> TP1017 (UNUSED) */ 299 regulator-name = "ldo2"; 300 regulator-min-microvolt = <1800000>; 301 regulator-max-microvolt = <3300000>; 302 }; 303 304 ldo3_reg: ldo3 { 305 /* VDDA_1V8_PHY */ 306 regulator-name = "ldo3"; 307 regulator-min-microvolt = <1800000>; 308 regulator-max-microvolt = <1800000>; 309 regulator-boot-on; 310 regulator-always-on; 311 }; 312 313 ldo5_reg: ldo5 { 314 /* VDDA_1V8_PLL */ 315 regulator-name = "ldo5"; 316 regulator-min-microvolt = <1800000>; 317 regulator-max-microvolt = <1800000>; 318 regulator-always-on; 319 regulator-boot-on; 320 }; 321 322 ldo4_reg: ldo4 { 323 /* VDDA_3V_USB: VDDA_USBHS33 */ 324 regulator-name = "ldo4"; 325 regulator-min-microvolt = <3300000>; 326 regulator-max-microvolt = <3300000>; 327 regulator-boot-on; 328 }; 329 }; 330 }; 331 332 tps65917_power_button { 333 compatible = "ti,palmas-pwrbutton"; 334 interrupt-parent = <&tps65917>; 335 interrupts = <1 IRQ_TYPE_NONE>; 336 wakeup-source; 337 ti,palmas-long-press-seconds = <6>; 338 }; 339 }; 340 341 pcf_gpio_21: gpio@21 { 342 compatible = "ti,pcf8575"; 343 reg = <0x21>; 344 lines-initial-states = <0x1408>; 345 gpio-controller; 346 #gpio-cells = <2>; 347 interrupt-parent = <&gpio6>; 348 interrupts = <11 IRQ_TYPE_EDGE_FALLING>; 349 interrupt-controller; 350 #interrupt-cells = <2>; 351 }; 352}; 353 354&i2c5 { 355 status = "okay"; 356 pinctrl-names = "default"; 357 pinctrl-0 = <&i2c5_pins>; 358 clock-frequency = <400000>; 359 360 pcf_hdmi: pcf8575@26 { 361 compatible = "nxp,pcf8575"; 362 reg = <0x26>; 363 gpio-controller; 364 #gpio-cells = <2>; 365 /* 366 * initial state is used here to keep the mdio interface 367 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and 368 * VIN2_S0 driven high otherwise Ethernet stops working 369 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 370 */ 371 lines-initial-states = <0x0f2b>; 372 }; 373}; 374 375&uart1 { 376 status = "okay"; 377}; 378 379&elm { 380 status = "okay"; 381}; 382 383&gpmc { 384 status = "okay"; 385 pinctrl-names = "default"; 386 pinctrl-0 = <&nand_default>; 387 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ 388 nand@0,0 { 389 /* To use NAND, DIP switch SW5 must be set like so: 390 * SW5.1 (NAND_SELn) = ON (LOW) 391 * SW5.9 (GPMC_WPN) = OFF (HIGH) 392 */ 393 reg = <0 0 4>; /* device IO registers */ 394 ti,nand-ecc-opt = "bch8"; 395 ti,elm-id = <&elm>; 396 nand-bus-width = <16>; 397 gpmc,device-width = <2>; 398 gpmc,sync-clk-ps = <0>; 399 gpmc,cs-on-ns = <0>; 400 gpmc,cs-rd-off-ns = <80>; 401 gpmc,cs-wr-off-ns = <80>; 402 gpmc,adv-on-ns = <0>; 403 gpmc,adv-rd-off-ns = <60>; 404 gpmc,adv-wr-off-ns = <60>; 405 gpmc,we-on-ns = <10>; 406 gpmc,we-off-ns = <50>; 407 gpmc,oe-on-ns = <4>; 408 gpmc,oe-off-ns = <40>; 409 gpmc,access-ns = <40>; 410 gpmc,wr-access-ns = <80>; 411 gpmc,rd-cycle-ns = <80>; 412 gpmc,wr-cycle-ns = <80>; 413 gpmc,bus-turnaround-ns = <0>; 414 gpmc,cycle2cycle-delay-ns = <0>; 415 gpmc,clk-activation-ns = <0>; 416 gpmc,wait-monitoring-ns = <0>; 417 gpmc,wr-data-mux-bus-ns = <0>; 418 /* MTD partition table */ 419 /* All SPL-* partitions are sized to minimal length 420 * which can be independently programmable. For 421 * NAND flash this is equal to size of erase-block */ 422 #address-cells = <1>; 423 #size-cells = <1>; 424 partition@0 { 425 label = "NAND.SPL"; 426 reg = <0x00000000 0x000020000>; 427 }; 428 partition@1 { 429 label = "NAND.SPL.backup1"; 430 reg = <0x00020000 0x00020000>; 431 }; 432 partition@2 { 433 label = "NAND.SPL.backup2"; 434 reg = <0x00040000 0x00020000>; 435 }; 436 partition@3 { 437 label = "NAND.SPL.backup3"; 438 reg = <0x00060000 0x00020000>; 439 }; 440 partition@4 { 441 label = "NAND.u-boot-spl-os"; 442 reg = <0x00080000 0x00040000>; 443 }; 444 partition@5 { 445 label = "NAND.u-boot"; 446 reg = <0x000c0000 0x00100000>; 447 }; 448 partition@6 { 449 label = "NAND.u-boot-env"; 450 reg = <0x001c0000 0x00020000>; 451 }; 452 partition@7 { 453 label = "NAND.u-boot-env.backup1"; 454 reg = <0x001e0000 0x00020000>; 455 }; 456 partition@8 { 457 label = "NAND.kernel"; 458 reg = <0x00200000 0x00800000>; 459 }; 460 partition@9 { 461 label = "NAND.file-system"; 462 reg = <0x00a00000 0x0f600000>; 463 }; 464 }; 465}; 466 467&usb2_phy1 { 468 phy-supply = <&ldo4_reg>; 469}; 470 471&usb2_phy2 { 472 phy-supply = <&ldo4_reg>; 473}; 474 475&omap_dwc3_1 { 476 extcon = <&extcon_usb1>; 477}; 478 479&omap_dwc3_2 { 480 extcon = <&extcon_usb2>; 481}; 482 483&usb1 { 484 dr_mode = "peripheral"; 485 pinctrl-names = "default"; 486 pinctrl-0 = <&usb1_pins>; 487}; 488 489&usb2 { 490 dr_mode = "host"; 491 pinctrl-names = "default"; 492 pinctrl-0 = <&usb2_pins>; 493}; 494 495&mmc1 { 496 status = "okay"; 497 pinctrl-names = "default"; 498 pinctrl-0 = <&mmc1_pins_default>; 499 500 vmmc-supply = <&ldo1_reg>; 501 bus-width = <4>; 502 /* 503 * SDCD signal is not being used here - using the fact that GPIO mode 504 * is a viable alternative 505 */ 506 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; 507}; 508 509&mmc2 { 510 /* SW5-3 in ON position */ 511 status = "okay"; 512 pinctrl-names = "default"; 513 pinctrl-0 = <&mmc2_pins_default>; 514 515 vmmc-supply = <&evm_3v3>; 516 bus-width = <8>; 517 ti,non-removable; 518}; 519 520&dra7_pmx_core { 521 cpsw_default: cpsw_default { 522 pinctrl-single,pins = < 523 /* Slave 2 */ 524 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ 525 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ 526 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ 527 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ 528 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ 529 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ 530 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ 531 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ 532 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ 533 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ 534 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ 535 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ 536 >; 537 538 }; 539 540 cpsw_sleep: cpsw_sleep { 541 pinctrl-single,pins = < 542 /* Slave 2 */ 543 0x198 (MUX_MODE15) 544 0x19c (MUX_MODE15) 545 0x1a0 (MUX_MODE15) 546 0x1a4 (MUX_MODE15) 547 0x1a8 (MUX_MODE15) 548 0x1ac (MUX_MODE15) 549 0x1b0 (MUX_MODE15) 550 0x1b4 (MUX_MODE15) 551 0x1b8 (MUX_MODE15) 552 0x1bc (MUX_MODE15) 553 0x1c0 (MUX_MODE15) 554 0x1c4 (MUX_MODE15) 555 >; 556 }; 557 558 davinci_mdio_default: davinci_mdio_default { 559 pinctrl-single,pins = < 560 /* MDIO */ 561 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ 562 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 563 >; 564 }; 565 566 davinci_mdio_sleep: davinci_mdio_sleep { 567 pinctrl-single,pins = < 568 0x23c (MUX_MODE15) 569 0x240 (MUX_MODE15) 570 >; 571 }; 572}; 573 574&mac { 575 status = "okay"; 576 pinctrl-names = "default", "sleep"; 577 pinctrl-0 = <&cpsw_default>; 578 pinctrl-1 = <&cpsw_sleep>; 579}; 580 581&cpsw_emac1 { 582 phy_id = <&davinci_mdio>, <3>; 583 phy-mode = "rgmii"; 584}; 585 586&davinci_mdio { 587 pinctrl-names = "default", "sleep"; 588 pinctrl-0 = <&davinci_mdio_default>; 589 pinctrl-1 = <&davinci_mdio_sleep>; 590 active_slave = <1>; 591}; 592 593&dcan1 { 594 status = "ok"; 595 pinctrl-names = "default", "sleep", "active"; 596 pinctrl-0 = <&dcan1_pins_sleep>; 597 pinctrl-1 = <&dcan1_pins_sleep>; 598 pinctrl-2 = <&dcan1_pins_default>; 599}; 600 601&qspi { 602 status = "okay"; 603 pinctrl-names = "default"; 604 pinctrl-0 = <&qspi1_pins>; 605 606 spi-max-frequency = <48000000>; 607 m25p80@0 { 608 compatible = "s25fl256s1","spi-flash"; 609 spi-max-frequency = <48000000>; 610 reg = <0>; 611 spi-tx-bus-width = <1>; 612 spi-rx-bus-width = <4>; 613 spi-cpol; 614 spi-cpha; 615 #address-cells = <1>; 616 #size-cells = <1>; 617 618 /* MTD partition table. 619 * The ROM checks the first four physical blocks 620 * for a valid file to boot and the flash here is 621 * 64KiB block size. 622 */ 623 partition@0 { 624 label = "QSPI.SPL"; 625 reg = <0x00000000 0x000010000>; 626 }; 627 partition@1 { 628 label = "QSPI.SPL.backup1"; 629 reg = <0x00010000 0x00010000>; 630 }; 631 partition@2 { 632 label = "QSPI.SPL.backup2"; 633 reg = <0x00020000 0x00010000>; 634 }; 635 partition@3 { 636 label = "QSPI.SPL.backup3"; 637 reg = <0x00030000 0x00010000>; 638 }; 639 partition@4 { 640 label = "QSPI.u-boot"; 641 reg = <0x00040000 0x00100000>; 642 }; 643 partition@5 { 644 label = "QSPI.u-boot-spl-os"; 645 reg = <0x00140000 0x00080000>; 646 }; 647 partition@6 { 648 label = "QSPI.u-boot-env"; 649 reg = <0x001c0000 0x00010000>; 650 }; 651 partition@7 { 652 label = "QSPI.u-boot-env.backup1"; 653 reg = <0x001d0000 0x0010000>; 654 }; 655 partition@8 { 656 label = "QSPI.kernel"; 657 reg = <0x001e0000 0x0800000>; 658 }; 659 partition@9 { 660 label = "QSPI.file-system"; 661 reg = <0x009e0000 0x01620000>; 662 }; 663 }; 664}; 665 666&dss { 667 status = "ok"; 668 669 vdda_video-supply = <&ldo5_reg>; 670}; 671 672&hdmi { 673 status = "ok"; 674 vdda-supply = <&ldo3_reg>; 675 676 pinctrl-names = "default"; 677 pinctrl-0 = <&hdmi_pins>; 678 679 port { 680 hdmi_out: endpoint { 681 remote-endpoint = <&tpd12s015_in>; 682 }; 683 }; 684}; 685