1/* 2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8/dts-v1/; 9 10#include "dra74x.dtsi" 11#include <dt-bindings/gpio/gpio.h> 12 13/ { 14 model = "TI DRA742"; 15 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; 16 17 chosen { 18 stdout-path = &uart1; 19 tick-timer = &timer2; 20 }; 21 22 memory { 23 device_type = "memory"; 24 reg = <0x80000000 0x60000000>; /* 1536 MB */ 25 }; 26 27 mmc2_3v3: fixedregulator-mmc2 { 28 compatible = "regulator-fixed"; 29 regulator-name = "mmc2_3v3"; 30 regulator-min-microvolt = <3300000>; 31 regulator-max-microvolt = <3300000>; 32 }; 33 34 extcon_usb1: extcon_usb1 { 35 compatible = "linux,extcon-usb-gpio"; 36 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; 37 }; 38 39 extcon_usb2: extcon_usb2 { 40 compatible = "linux,extcon-usb-gpio"; 41 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; 42 }; 43 44 vtt_fixed: fixedregulator-vtt { 45 compatible = "regulator-fixed"; 46 regulator-name = "vtt_fixed"; 47 regulator-min-microvolt = <1350000>; 48 regulator-max-microvolt = <1350000>; 49 regulator-always-on; 50 regulator-boot-on; 51 enable-active-high; 52 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; 53 }; 54}; 55 56&dra7_pmx_core { 57 pinctrl-names = "default"; 58 pinctrl-0 = <&vtt_pin>; 59 60 vtt_pin: pinmux_vtt_pin { 61 pinctrl-single,pins = < 62 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ 63 >; 64 }; 65 66 i2c1_pins: pinmux_i2c1_pins { 67 pinctrl-single,pins = < 68 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ 69 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ 70 >; 71 }; 72 73 i2c2_pins: pinmux_i2c2_pins { 74 pinctrl-single,pins = < 75 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ 76 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ 77 >; 78 }; 79 80 i2c3_pins: pinmux_i2c3_pins { 81 pinctrl-single,pins = < 82 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ 83 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ 84 >; 85 }; 86 87 mcspi1_pins: pinmux_mcspi1_pins { 88 pinctrl-single,pins = < 89 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */ 90 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */ 91 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */ 92 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ 93 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ 94 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ 95 >; 96 }; 97 98 mcspi2_pins: pinmux_mcspi2_pins { 99 pinctrl-single,pins = < 100 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */ 101 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ 102 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ 103 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ 104 >; 105 }; 106 107 uart1_pins: pinmux_uart1_pins { 108 pinctrl-single,pins = < 109 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ 110 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ 111 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ 112 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ 113 >; 114 }; 115 116 uart2_pins: pinmux_uart2_pins { 117 pinctrl-single,pins = < 118 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */ 119 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */ 120 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ 121 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ 122 >; 123 }; 124 125 uart3_pins: pinmux_uart3_pins { 126 pinctrl-single,pins = < 127 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ 128 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ 129 >; 130 }; 131 132 qspi1_pins: pinmux_qspi1_pins { 133 pinctrl-single,pins = < 134 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ 135 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ 136 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ 137 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ 138 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ 139 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ 140 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ 141 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ 142 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ 143 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ 144 >; 145 }; 146 147 usb1_pins: pinmux_usb1_pins { 148 pinctrl-single,pins = < 149 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ 150 >; 151 }; 152 153 usb2_pins: pinmux_usb2_pins { 154 pinctrl-single,pins = < 155 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ 156 >; 157 }; 158 159 nand_flash_x16: nand_flash_x16 { 160 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch 161 * So NAND flash requires following switch settings: 162 * SW5.9 (GPMC_WPN) = LOW 163 * SW5.1 (NAND_BOOTn) = HIGH */ 164 pinctrl-single,pins = < 165 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ 166 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ 167 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ 168 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ 169 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ 170 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ 171 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ 172 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ 173 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ 174 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ 175 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ 176 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ 177 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ 178 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ 179 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ 180 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ 181 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ 182 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ 183 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ 184 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ 185 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ 186 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ 187 >; 188 }; 189 190 cpsw_default: cpsw_default { 191 pinctrl-single,pins = < 192 /* Slave 1 */ 193 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ 194 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ 195 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ 196 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ 197 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ 198 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ 199 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ 200 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ 201 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ 202 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ 203 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ 204 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ 205 206 /* Slave 2 */ 207 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ 208 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ 209 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ 210 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ 211 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ 212 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ 213 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ 214 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ 215 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ 216 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ 217 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ 218 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ 219 >; 220 221 }; 222 223 cpsw_sleep: cpsw_sleep { 224 pinctrl-single,pins = < 225 /* Slave 1 */ 226 0x250 (MUX_MODE15) 227 0x254 (MUX_MODE15) 228 0x258 (MUX_MODE15) 229 0x25c (MUX_MODE15) 230 0x260 (MUX_MODE15) 231 0x264 (MUX_MODE15) 232 0x268 (MUX_MODE15) 233 0x26c (MUX_MODE15) 234 0x270 (MUX_MODE15) 235 0x274 (MUX_MODE15) 236 0x278 (MUX_MODE15) 237 0x27c (MUX_MODE15) 238 239 /* Slave 2 */ 240 0x198 (MUX_MODE15) 241 0x19c (MUX_MODE15) 242 0x1a0 (MUX_MODE15) 243 0x1a4 (MUX_MODE15) 244 0x1a8 (MUX_MODE15) 245 0x1ac (MUX_MODE15) 246 0x1b0 (MUX_MODE15) 247 0x1b4 (MUX_MODE15) 248 0x1b8 (MUX_MODE15) 249 0x1bc (MUX_MODE15) 250 0x1c0 (MUX_MODE15) 251 0x1c4 (MUX_MODE15) 252 >; 253 }; 254 255 davinci_mdio_default: davinci_mdio_default { 256 pinctrl-single,pins = < 257 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ 258 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 259 >; 260 }; 261 262 davinci_mdio_sleep: davinci_mdio_sleep { 263 pinctrl-single,pins = < 264 0x23c (MUX_MODE15) 265 0x240 (MUX_MODE15) 266 >; 267 }; 268 269 dcan1_pins_default: dcan1_pins_default { 270 pinctrl-single,pins = < 271 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ 272 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ 273 >; 274 }; 275 276 dcan1_pins_sleep: dcan1_pins_sleep { 277 pinctrl-single,pins = < 278 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ 279 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ 280 >; 281 }; 282}; 283 284&i2c1 { 285 status = "okay"; 286 pinctrl-names = "default"; 287 pinctrl-0 = <&i2c1_pins>; 288 clock-frequency = <400000>; 289 290 tps659038: tps659038@58 { 291 compatible = "ti,tps659038"; 292 reg = <0x58>; 293 294 tps659038_pmic { 295 compatible = "ti,tps659038-pmic"; 296 297 regulators { 298 smps123_reg: smps123 { 299 /* VDD_MPU */ 300 regulator-name = "smps123"; 301 regulator-min-microvolt = < 850000>; 302 regulator-max-microvolt = <1250000>; 303 regulator-always-on; 304 regulator-boot-on; 305 }; 306 307 smps45_reg: smps45 { 308 /* VDD_DSPEVE */ 309 regulator-name = "smps45"; 310 regulator-min-microvolt = < 850000>; 311 regulator-max-microvolt = <1150000>; 312 regulator-always-on; 313 regulator-boot-on; 314 }; 315 316 smps6_reg: smps6 { 317 /* VDD_GPU - over VDD_SMPS6 */ 318 regulator-name = "smps6"; 319 regulator-min-microvolt = <850000>; 320 regulator-max-microvolt = <1250000>; 321 regulator-always-on; 322 regulator-boot-on; 323 }; 324 325 smps7_reg: smps7 { 326 /* CORE_VDD */ 327 regulator-name = "smps7"; 328 regulator-min-microvolt = <850000>; 329 regulator-max-microvolt = <1060000>; 330 regulator-always-on; 331 regulator-boot-on; 332 }; 333 334 smps8_reg: smps8 { 335 /* VDD_IVAHD */ 336 regulator-name = "smps8"; 337 regulator-min-microvolt = < 850000>; 338 regulator-max-microvolt = <1250000>; 339 regulator-always-on; 340 regulator-boot-on; 341 }; 342 343 smps9_reg: smps9 { 344 /* VDDS1V8 */ 345 regulator-name = "smps9"; 346 regulator-min-microvolt = <1800000>; 347 regulator-max-microvolt = <1800000>; 348 regulator-always-on; 349 regulator-boot-on; 350 }; 351 352 ldo1_reg: ldo1 { 353 /* LDO1_OUT --> SDIO */ 354 regulator-name = "ldo1"; 355 regulator-min-microvolt = <1800000>; 356 regulator-max-microvolt = <3300000>; 357 regulator-boot-on; 358 }; 359 360 ldo2_reg: ldo2 { 361 /* VDD_RTCIO */ 362 /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ 363 regulator-name = "ldo2"; 364 regulator-min-microvolt = <3300000>; 365 regulator-max-microvolt = <3300000>; 366 regulator-always-on; 367 regulator-boot-on; 368 }; 369 370 ldo3_reg: ldo3 { 371 /* VDDA_1V8_PHY */ 372 regulator-name = "ldo3"; 373 regulator-min-microvolt = <1800000>; 374 regulator-max-microvolt = <1800000>; 375 regulator-always-on; 376 regulator-boot-on; 377 }; 378 379 ldo9_reg: ldo9 { 380 /* VDD_RTC */ 381 regulator-name = "ldo9"; 382 regulator-min-microvolt = <1050000>; 383 regulator-max-microvolt = <1050000>; 384 regulator-always-on; 385 regulator-boot-on; 386 }; 387 388 ldoln_reg: ldoln { 389 /* VDDA_1V8_PLL */ 390 regulator-name = "ldoln"; 391 regulator-min-microvolt = <1800000>; 392 regulator-max-microvolt = <1800000>; 393 regulator-always-on; 394 regulator-boot-on; 395 }; 396 397 ldousb_reg: ldousb { 398 /* VDDA_3V_USB: VDDA_USBHS33 */ 399 regulator-name = "ldousb"; 400 regulator-min-microvolt = <3300000>; 401 regulator-max-microvolt = <3300000>; 402 regulator-boot-on; 403 }; 404 }; 405 }; 406 }; 407 408 pcf_gpio_21: gpio@21 { 409 compatible = "ti,pcf8575"; 410 reg = <0x21>; 411 lines-initial-states = <0x1408>; 412 gpio-controller; 413 #gpio-cells = <2>; 414 interrupt-parent = <&gpio6>; 415 interrupts = <11 IRQ_TYPE_EDGE_FALLING>; 416 interrupt-controller; 417 #interrupt-cells = <2>; 418 }; 419 420}; 421 422&i2c2 { 423 status = "okay"; 424 pinctrl-names = "default"; 425 pinctrl-0 = <&i2c2_pins>; 426 clock-frequency = <400000>; 427}; 428 429&i2c3 { 430 status = "okay"; 431 pinctrl-names = "default"; 432 pinctrl-0 = <&i2c3_pins>; 433 clock-frequency = <400000>; 434}; 435 436&mcspi1 { 437 status = "okay"; 438 pinctrl-names = "default"; 439 pinctrl-0 = <&mcspi1_pins>; 440}; 441 442&mcspi2 { 443 status = "okay"; 444 pinctrl-names = "default"; 445 pinctrl-0 = <&mcspi2_pins>; 446}; 447 448&uart1 { 449 status = "okay"; 450 pinctrl-names = "default"; 451 pinctrl-0 = <&uart1_pins>; 452 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, 453 <&dra7_pmx_core 0x3e0>; 454}; 455 456&uart2 { 457 status = "okay"; 458 pinctrl-names = "default"; 459 pinctrl-0 = <&uart2_pins>; 460}; 461 462&uart3 { 463 status = "okay"; 464 pinctrl-names = "default"; 465 pinctrl-0 = <&uart3_pins>; 466}; 467 468&mmc1 { 469 status = "okay"; 470 vmmc-supply = <&ldo1_reg>; 471 bus-width = <4>; 472 /* 473 * SDCD signal is not being used here - using the fact that GPIO mode 474 * is always hardwired. 475 */ 476 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; 477}; 478 479&mmc2 { 480 status = "okay"; 481 vmmc-supply = <&mmc2_3v3>; 482 bus-width = <8>; 483}; 484 485&cpu0 { 486 cpu0-supply = <&smps123_reg>; 487}; 488 489&qspi { 490 status = "okay"; 491 pinctrl-names = "default"; 492 pinctrl-0 = <&qspi1_pins>; 493 494 spi-max-frequency = <48000000>; 495 m25p80@0 { 496 compatible = "s25fl256s1","spi-flash"; 497 spi-max-frequency = <48000000>; 498 reg = <0>; 499 spi-tx-bus-width = <1>; 500 spi-rx-bus-width = <4>; 501 spi-cpol; 502 spi-cpha; 503 #address-cells = <1>; 504 #size-cells = <1>; 505 506 /* MTD partition table. 507 * The ROM checks the first four physical blocks 508 * for a valid file to boot and the flash here is 509 * 64KiB block size. 510 */ 511 partition@0 { 512 label = "QSPI.SPL"; 513 reg = <0x00000000 0x000010000>; 514 }; 515 partition@1 { 516 label = "QSPI.SPL.backup1"; 517 reg = <0x00010000 0x00010000>; 518 }; 519 partition@2 { 520 label = "QSPI.SPL.backup2"; 521 reg = <0x00020000 0x00010000>; 522 }; 523 partition@3 { 524 label = "QSPI.SPL.backup3"; 525 reg = <0x00030000 0x00010000>; 526 }; 527 partition@4 { 528 label = "QSPI.u-boot"; 529 reg = <0x00040000 0x00100000>; 530 }; 531 partition@5 { 532 label = "QSPI.u-boot-spl-os"; 533 reg = <0x00140000 0x00080000>; 534 }; 535 partition@6 { 536 label = "QSPI.u-boot-env"; 537 reg = <0x001c0000 0x00010000>; 538 }; 539 partition@7 { 540 label = "QSPI.u-boot-env.backup1"; 541 reg = <0x001d0000 0x0010000>; 542 }; 543 partition@8 { 544 label = "QSPI.kernel"; 545 reg = <0x001e0000 0x0800000>; 546 }; 547 partition@9 { 548 label = "QSPI.file-system"; 549 reg = <0x009e0000 0x01620000>; 550 }; 551 }; 552}; 553 554&omap_dwc3_1 { 555 extcon = <&extcon_usb1>; 556}; 557 558&omap_dwc3_2 { 559 extcon = <&extcon_usb2>; 560}; 561 562&usb1 { 563 dr_mode = "peripheral"; 564 pinctrl-names = "default"; 565 pinctrl-0 = <&usb1_pins>; 566}; 567 568&usb2 { 569 dr_mode = "host"; 570 pinctrl-names = "default"; 571 pinctrl-0 = <&usb2_pins>; 572}; 573 574&elm { 575 status = "okay"; 576}; 577 578&gpmc { 579 status = "okay"; 580 pinctrl-names = "default"; 581 pinctrl-0 = <&nand_flash_x16>; 582 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ 583 nand@0,0 { 584 reg = <0 0 4>; /* device IO registers */ 585 ti,nand-ecc-opt = "bch8"; 586 ti,elm-id = <&elm>; 587 nand-bus-width = <16>; 588 gpmc,device-width = <2>; 589 gpmc,sync-clk-ps = <0>; 590 gpmc,cs-on-ns = <0>; 591 gpmc,cs-rd-off-ns = <80>; 592 gpmc,cs-wr-off-ns = <80>; 593 gpmc,adv-on-ns = <0>; 594 gpmc,adv-rd-off-ns = <60>; 595 gpmc,adv-wr-off-ns = <60>; 596 gpmc,we-on-ns = <10>; 597 gpmc,we-off-ns = <50>; 598 gpmc,oe-on-ns = <4>; 599 gpmc,oe-off-ns = <40>; 600 gpmc,access-ns = <40>; 601 gpmc,wr-access-ns = <80>; 602 gpmc,rd-cycle-ns = <80>; 603 gpmc,wr-cycle-ns = <80>; 604 gpmc,bus-turnaround-ns = <0>; 605 gpmc,cycle2cycle-delay-ns = <0>; 606 gpmc,clk-activation-ns = <0>; 607 gpmc,wait-monitoring-ns = <0>; 608 gpmc,wr-data-mux-bus-ns = <0>; 609 /* MTD partition table */ 610 /* All SPL-* partitions are sized to minimal length 611 * which can be independently programmable. For 612 * NAND flash this is equal to size of erase-block */ 613 #address-cells = <1>; 614 #size-cells = <1>; 615 partition@0 { 616 label = "NAND.SPL"; 617 reg = <0x00000000 0x000020000>; 618 }; 619 partition@1 { 620 label = "NAND.SPL.backup1"; 621 reg = <0x00020000 0x00020000>; 622 }; 623 partition@2 { 624 label = "NAND.SPL.backup2"; 625 reg = <0x00040000 0x00020000>; 626 }; 627 partition@3 { 628 label = "NAND.SPL.backup3"; 629 reg = <0x00060000 0x00020000>; 630 }; 631 partition@4 { 632 label = "NAND.u-boot-spl-os"; 633 reg = <0x00080000 0x00040000>; 634 }; 635 partition@5 { 636 label = "NAND.u-boot"; 637 reg = <0x000c0000 0x00100000>; 638 }; 639 partition@6 { 640 label = "NAND.u-boot-env"; 641 reg = <0x001c0000 0x00020000>; 642 }; 643 partition@7 { 644 label = "NAND.u-boot-env.backup1"; 645 reg = <0x001e0000 0x00020000>; 646 }; 647 partition@8 { 648 label = "NAND.kernel"; 649 reg = <0x00200000 0x00800000>; 650 }; 651 partition@9 { 652 label = "NAND.file-system"; 653 reg = <0x00a00000 0x0f600000>; 654 }; 655 }; 656}; 657 658&usb2_phy1 { 659 phy-supply = <&ldousb_reg>; 660}; 661 662&usb2_phy2 { 663 phy-supply = <&ldousb_reg>; 664}; 665 666&gpio7 { 667 ti,no-reset-on-init; 668 ti,no-idle-on-init; 669}; 670 671&mac { 672 status = "okay"; 673 pinctrl-names = "default", "sleep"; 674 pinctrl-0 = <&cpsw_default>; 675 pinctrl-1 = <&cpsw_sleep>; 676 dual_emac; 677}; 678 679&cpsw_emac0 { 680 phy_id = <&davinci_mdio>, <2>; 681 phy-mode = "rgmii"; 682 dual_emac_res_vlan = <1>; 683}; 684 685&cpsw_emac1 { 686 phy_id = <&davinci_mdio>, <3>; 687 phy-mode = "rgmii"; 688 dual_emac_res_vlan = <2>; 689}; 690 691&davinci_mdio { 692 pinctrl-names = "default", "sleep"; 693 pinctrl-0 = <&davinci_mdio_default>; 694 pinctrl-1 = <&davinci_mdio_sleep>; 695}; 696 697&dcan1 { 698 status = "ok"; 699 pinctrl-names = "default", "sleep", "active"; 700 pinctrl-0 = <&dcan1_pins_sleep>; 701 pinctrl-1 = <&dcan1_pins_sleep>; 702 pinctrl-2 = <&dcan1_pins_default>; 703}; 704