1/* 2 * Copyright (C) 2016 Marvell Technology Group Ltd. 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPLv2 or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This library is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This library is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/* 44 * Device Tree file for Marvell Armada 7040 Development board platform 45 * Boot device: SPI NOR, 0x32 (SW3) 46 */ 47 48#include "armada-7040.dtsi" 49 50/ { 51 model = "Marvell Armada 7040 DB board"; 52 compatible = "marvell,armada7040-db", "marvell,armada7040", 53 "marvell,armada-ap806-quad", "marvell,armada-ap806"; 54 55 chosen { 56 stdout-path = "serial0:115200n8"; 57 }; 58 59 aliases { 60 i2c0 = &cpm_i2c0; 61 spi0 = &cpm_spi1; 62 }; 63 64 memory@00000000 { 65 device_type = "memory"; 66 reg = <0x0 0x0 0x0 0x80000000>; 67 }; 68}; 69 70&ap_pinctl { 71 /* MPP Bus: 72 * SDIO [0-5] 73 * UART0 [11,19] 74 */ 75 /* 0 1 2 3 4 5 6 7 8 9 */ 76 pin-func = < 1 1 1 1 1 1 0 0 0 0 77 0 3 0 0 0 0 0 0 0 3 >; 78}; 79 80&uart0 { 81 status = "okay"; 82}; 83 84 85&cpm_pcie2 { 86 status = "okay"; 87}; 88 89&cpm_i2c0 { 90 pinctrl-names = "default"; 91 pinctrl-0 = <&cpm_i2c0_pins>; 92 status = "okay"; 93 clock-frequency = <100000>; 94}; 95 96&cpm_pinctl { 97 /* MPP Bus: 98 * TDM [0-11] 99 * SPI [13-16] 100 * SATA1 [28] 101 * UART0 [29-30] 102 * SMI [32,34] 103 * XSMI [35-36] 104 * I2C [37-38] 105 * RGMII1[44-55] 106 * SD [56-62] 107 */ 108 /* 0 1 2 3 4 5 6 7 8 9 */ 109 pin-func = < 4 4 4 4 4 4 4 4 4 4 110 4 4 0 3 3 3 3 0 0 0 111 0 0 0 0 0 0 0 0 9 0xA 112 0xA 0 7 0 7 7 7 2 2 0 113 0 0 0 0 1 1 1 1 1 1 114 1 1 1 1 1 1 0xE 0xE 0xE 0xE 115 0xE 0xE 0xE >; 116}; 117 118&cpm_spi1 { 119 pinctrl-names = "default"; 120 pinctrl-0 = <&cpm_spi0_pins>; 121 status = "okay"; 122 123 spi-flash@0 { 124 #address-cells = <0x1>; 125 #size-cells = <0x1>; 126 compatible = "jedec,spi-nor"; 127 reg = <0x0>; 128 spi-max-frequency = <20000000>; 129 130 partitions { 131 compatible = "fixed-partitions"; 132 #address-cells = <1>; 133 #size-cells = <1>; 134 135 partition@0 { 136 label = "U-Boot"; 137 reg = <0x0 0x200000>; 138 }; 139 140 partition@400000 { 141 label = "Filesystem"; 142 reg = <0x200000 0xe00000>; 143 }; 144 }; 145 }; 146}; 147 148&cpm_sata0 { 149 status = "okay"; 150}; 151 152&cpm_usb3_0 { 153 status = "okay"; 154}; 155 156&cpm_usb3_1 { 157 status = "okay"; 158}; 159 160&cpm_comphy { 161 phy0 { 162 phy-type = <PHY_TYPE_SGMII1>; 163 phy-speed = <PHY_SPEED_1_25G>; 164 }; 165 166 phy1 { 167 phy-type = <PHY_TYPE_USB3_HOST0>; 168 phy-speed = <PHY_SPEED_5G>; 169 }; 170 171 phy2 { 172 phy-type = <PHY_TYPE_SGMII0>; 173 phy-speed = <PHY_SPEED_1_25G>; 174 }; 175 176 phy3 { 177 phy-type = <PHY_TYPE_SATA1>; 178 phy-speed = <PHY_SPEED_5G>; 179 }; 180 181 phy4 { 182 phy-type = <PHY_TYPE_USB3_HOST1>; 183 phy-speed = <PHY_SPEED_5G>; 184 }; 185 186 phy5 { 187 phy-type = <PHY_TYPE_PEX2>; 188 phy-speed = <PHY_SPEED_5G>; 189 }; 190}; 191 192&cpm_utmi0 { 193 status = "okay"; 194}; 195 196&cpm_utmi1 { 197 status = "okay"; 198}; 199 200&ap_sdhci0 { 201 status = "okay"; 202 bus-width = <4>; 203 no-1-8-v; 204 non-removable; 205}; 206 207&cpm_sdhci0 { 208 status = "okay"; 209 bus-width = <4>; 210 no-1-8-v; 211 non-removable; 212}; 213 214&cpm_mdio { 215 phy0: ethernet-phy@0 { 216 reg = <0>; 217 }; 218 phy1: ethernet-phy@1 { 219 reg = <1>; 220 }; 221}; 222 223&cpm_ethernet { 224 status = "okay"; 225}; 226 227&cpm_eth1 { 228 status = "okay"; 229 phy = <&phy0>; 230 phy-mode = "sgmii"; 231}; 232 233&cpm_eth2 { 234 status = "okay"; 235 phy = <&phy1>; 236 phy-mode = "rgmii-id"; 237}; 238