1/*
2 * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
3 *
4 *  Copyright (C) 2015 Russell King
5 *
6 * This board is in development; the contents of this file work with
7 * the A1 rev 2.0 of the board, which does not represent final
8 * production board.  Things will change, don't expect this file to
9 * remain compatible info the future.
10 *
11 * This file is dual-licensed: you can use it either under the terms
12 * of the GPL or the X11 license, at your option. Note that this dual
13 * licensing only applies to this file, and not this project as a
14 * whole.
15 *
16 *  a) This file is free software; you can redistribute it and/or
17 *     modify it under the terms of the GNU General Public License
18 *     version 2 as published by the Free Software Foundation.
19 *
20 *     This file is distributed in the hope that it will be useful
21 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
22 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23 *     GNU General Public License for more details.
24 *
25 * Or, alternatively
26 *
27 *  b) Permission is hereby granted, free of charge, to any person
28 *     obtaining a copy of this software and associated documentation
29 *     files (the "Software"), to deal in the Software without
30 *     restriction, including without limitation the rights to use
31 *     copy, modify, merge, publish, distribute, sublicense, and/or
32 *     sell copies of the Software, and to permit persons to whom the
33 *     Software is furnished to do so, subject to the following
34 *     conditions:
35 *
36 *     The above copyright notice and this permission notice shall be
37 *     included in all copies or substantial portions of the Software.
38 *
39 *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
40 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
44 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46 *     OTHER DEALINGS IN THE SOFTWARE.
47 */
48
49/dts-v1/;
50#include <dt-bindings/input/input.h>
51#include <dt-bindings/gpio/gpio.h>
52#include "armada-388.dtsi"
53#include "armada-38x-solidrun-microsom.dtsi"
54
55/ {
56	model = "SolidRun Clearfog A1";
57	compatible = "solidrun,clearfog-a1", "marvell,armada388",
58		"marvell,armada385", "marvell,armada380";
59
60	aliases {
61		/* So that mvebu u-boot can update the MAC addresses */
62		ethernet1 = &eth0;
63		ethernet2 = &eth1;
64		ethernet3 = &eth2;
65		spi1 = &spi1;
66		i2c0 = &i2c0;
67		i2c1 = &i2c1;
68	};
69
70	chosen {
71		stdout-path = "serial0:115200n8";
72	};
73
74	reg_3p3v: regulator-3p3v {
75		compatible = "regulator-fixed";
76		regulator-name = "3P3V";
77		regulator-min-microvolt = <3300000>;
78		regulator-max-microvolt = <3300000>;
79		regulator-always-on;
80	};
81
82	soc {
83		internal-regs {
84			rtc@a3800 {
85				/*
86				 * If the rtc doesn't work, run "date reset"
87				 * twice in u-boot.
88				 */
89				status = "okay";
90			};
91
92			sata@a8000 {
93				/* pinctrl? */
94				status = "okay";
95			};
96
97			sata@e0000 {
98				/* pinctrl? */
99				status = "okay";
100			};
101
102			sdhci@d8000 {
103				bus-width = <4>;
104				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
105				no-1-8-v;
106				pinctrl-0 = <&microsom_sdhci_pins
107					     &clearfog_sdhci_cd_pins>;
108				pinctrl-names = "default";
109				status = "okay";
110				vmmc = <&reg_3p3v>;
111				wp-inverted;
112			};
113
114			serial@12100 {
115				/* mikrobus uart */
116				pinctrl-0 = <&mikro_uart_pins>;
117				pinctrl-names = "default";
118				status = "okay";
119			};
120
121			usb3@f8000 {
122				/* CON7, USB-A port on back of device */
123				status = "okay";
124			};
125		};
126
127		pcie {
128			status = "okay";
129			/*
130			 * The two PCIe units are accessible through
131			 * the mini-PCIe connectors on the board.
132			 */
133			pcie@2,0 {
134				/* Port 1, Lane 0. CONN3, nearest power. */
135				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
136				status = "okay";
137			};
138			pcie@3,0 {
139				/* Port 2, Lane 0. CONN2, nearest CPU. */
140				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
141				status = "okay";
142			};
143		};
144	};
145
146	gpio-keys {
147		compatible = "gpio-keys";
148		pinctrl-0 = <&rear_button_pins>;
149		pinctrl-names = "default";
150
151		button_0 {
152			/* The rear SW3 button */
153			label = "Rear Button";
154			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
155			linux,can-disable;
156			linux,code = <BTN_0>;
157		};
158	};
159};
160
161&w25q32 {
162	status = "okay";
163};
164
165&eth1 {
166	managed = "in-band-status";
167	phy-mode = "sgmii";
168	status = "okay";
169};
170
171&eth2 {
172	phy-mode = "sgmii";
173	status = "okay";
174};
175
176&i2c0 {
177	clock-frequency = <400000>;
178	pinctrl-0 = <&i2c0_pins>;
179	pinctrl-names = "default";
180	status = "okay";
181
182	/*
183	 * PCA9655 GPIO expander, up to 1MHz clock.
184	 *  0-CON3 CLKREQ#
185	 *  1-CON3 PERST#
186	 *  2-CON2 PERST#
187	 *  3-CON3 W_DISABLE
188	 *  4-CON2 CLKREQ#
189	 *  5-USB3 overcurrent
190	 *  6-USB3 power
191	 *  7-CON2 W_DISABLE
192	 *  8-JP4 P1
193	 *  9-JP4 P4
194	 * 10-JP4 P5
195	 * 11-m.2 DEVSLP
196	 * 12-SFP_LOS
197	 * 13-SFP_TX_FAULT
198	 * 14-SFP_TX_DISABLE
199	 * 15-SFP_MOD_DEF0
200	 */
201	expander0: gpio-expander@20 {
202		/*
203		 * This is how it should be:
204		 * compatible = "onnn,pca9655",
205		 *	 "nxp,pca9555";
206		 * but you can't do this because of
207		 * the way I2C works.
208		 */
209		compatible = "nxp,pca9555";
210		gpio-controller;
211		#gpio-cells = <2>;
212		reg = <0x20>;
213
214		pcie1_0_clkreq {
215			gpio-hog;
216			gpios = <0 GPIO_ACTIVE_LOW>;
217			input;
218			line-name = "pcie1.0-clkreq";
219		};
220		pcie1_0_w_disable {
221			gpio-hog;
222			gpios = <3 GPIO_ACTIVE_LOW>;
223			output-low;
224			line-name = "pcie1.0-w-disable";
225		};
226		pcie2_0_clkreq {
227			gpio-hog;
228			gpios = <4 GPIO_ACTIVE_LOW>;
229			input;
230			line-name = "pcie2.0-clkreq";
231		};
232		pcie2_0_w_disable {
233			gpio-hog;
234			gpios = <7 GPIO_ACTIVE_LOW>;
235			output-low;
236			line-name = "pcie2.0-w-disable";
237		};
238		usb3_ilimit {
239			gpio-hog;
240			gpios = <5 GPIO_ACTIVE_LOW>;
241			input;
242			line-name = "usb3-current-limit";
243		};
244		usb3_power {
245			gpio-hog;
246			gpios = <6 GPIO_ACTIVE_HIGH>;
247			output-high;
248			line-name = "usb3-power";
249		};
250		m2_devslp {
251			gpio-hog;
252			gpios = <11 GPIO_ACTIVE_HIGH>;
253			output-low;
254			line-name = "m.2 devslp";
255		};
256	};
257
258	mikrobus_adc: mcp3021@4c {
259		compatible = "microchip,mcp3021";
260		reg = <0x4c>;
261	};
262};
263
264&i2c1 {
265	/*
266	 * Routed to SFP, mikrobus, and PCIe.
267	 * SFP limits this to 100kHz, and requires
268	 *  an AT24C01A/02/04 with address pins tied
269	 *  low, which takes addresses 0x50 and 0x51.
270	 * Mikrobus doesn't specify beyond an I2C
271	 *  bus being present.
272	 * PCIe uses ARP to assign addresses, or
273	 *  0x63-0x64.
274	 */
275	clock-frequency = <100000>;
276	pinctrl-0 = <&clearfog_i2c1_pins>;
277	pinctrl-names = "default";
278	status = "okay";
279};
280
281&pinctrl {
282	clearfog_i2c1_pins: i2c1-pins {
283		/* SFP, PCIe, mSATA, mikrobus */
284		marvell,pins = "mpp26", "mpp27";
285		marvell,function = "i2c1";
286	};
287	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
288		marvell,pins = "mpp20";
289		marvell,function = "gpio";
290	};
291	clearfog_spi1_cs_pins: spi1-cs-pins {
292		marvell,pins = "mpp55";
293		marvell,function = "spi1";
294	};
295	mikro_pins: mikro-pins {
296		/* int: mpp22 rst: mpp29 */
297		marvell,pins = "mpp22", "mpp29";
298		marvell,function = "gpio";
299	};
300	mikro_spi_pins: mikro-spi-pins {
301		marvell,pins = "mpp43";
302		marvell,function = "spi1";
303	};
304	mikro_uart_pins: mikro-uart-pins {
305		marvell,pins = "mpp24", "mpp25";
306		marvell,function = "ua1";
307	};
308	rear_button_pins: rear-button-pins {
309		marvell,pins = "mpp34";
310		marvell,function = "gpio";
311	};
312};
313
314&spi1 {
315	/*
316	 * Add SPI CS pins for clearfog:
317	 * CS0: W25Q32
318	 * CS1:
319	 * CS2: mikrobus
320	 */
321	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
322	pinctrl-names = "default";
323	status = "okay";
324};
325
326/*
327+#define A38x_CUSTOMER_BOARD_1_MPP16_23         0x00400011
328MPP18: gpio		? (pca9655 int?)
329MPP19: gpio		? (clkreq?)
330MPP20: gpio		? (sd0 detect)
331MPP21: sd0:cmd		x sd0
332MPP22: gpio		x mikro int
333MPP23: gpio		x switch irq
334+#define A38x_CUSTOMER_BOARD_1_MPP24_31         0x22043333
335MPP24: ua1:rxd		x mikro rx
336MPP25: ua1:txd		x mikro tx
337MPP26: i2c1:sck		x mikro sck
338MPP27: i2c1:sda		x mikro sda
339MPP28: sd0:clk		x sd0
340MPP29: gpio		x mikro rst
341MPP30: ge1:txd2		? (config)
342MPP31: ge1:txd3		? (config)
343+#define A38x_CUSTOMER_BOARD_1_MPP32_39         0x44400002
344MPP32: ge1:txctl	? (unused)
345MPP33: gpio		? (pic_com0)
346MPP34: gpio		x rear button (pic_com1)
347MPP35: gpio		? (pic_com2)
348MPP36: gpio		? (unused)
349MPP37: sd0:d3		x sd0
350MPP38: sd0:d0		x sd0
351MPP39: sd0:d1		x sd0
352+#define A38x_CUSTOMER_BOARD_1_MPP40_47         0x41144004
353MPP40: sd0:d2		x sd0
354MPP41: gpio		x switch reset
355MPP42: gpio		? sw1-1
356MPP43: spi1:cs2		x mikro cs
357MPP44: sata3:prsnt	? (unused)
358MPP45: ref:clk_out0	?
359MPP46: ref:clk_out1	x switch clk
360MPP47: 4		? (unused)
361+#define A38x_CUSTOMER_BOARD_1_MPP48_55         0x40333333
362MPP48: tdm:pclk
363MPP49: tdm:fsync
364MPP50: tdm:drx
365MPP51: tdm:dtx
366MPP52: tdm:int
367MPP53: tdm:rst
368MPP54: gpio		? (pwm)
369MPP55: spi1:cs1		x slic
370+#define A38x_CUSTOMER_BOARD_1_MPP56_63         0x00004444
371MPP56: spi1:mosi	x mikro mosi
372MPP57: spi1:sck		x mikro sck
373MPP58: spi1:miso	x mikro miso
374MPP59: spi1:cs0		x w25q32
375*/
376