1/* 2 * Device Tree file for Marvell Armada 385 development board 3 * (DB-88F6820-AMC) 4 * 5 * Copyright (C) 2014 Marvell 6 * 7 * Gregory CLEMENT <gregory.clement@free-electrons.com> 8 * 9 * This file is dual-licensed: you can use it either under the terms 10 * of the GPL or the X11 license, at your option. Note that this dual 11 * licensing only applies to this file, and not this project as a 12 * whole. 13 * 14 * a) This file is licensed under the terms of the GNU General Public 15 * License version 2. This program is licensed "as is" without 16 * any warranty of any kind, whether express or implied. 17 * 18 * Or, alternatively, 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use, 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42/dts-v1/; 43#include "armada-385.dtsi" 44#include <dt-bindings/gpio/gpio.h> 45 46/ { 47 model = "Marvell Armada 385 AMC"; 48 compatible = "marvell,a385-amc", "marvell,armada385", "marvell,armada380"; 49 50 chosen { 51 stdout-path = "serial0:115200n8"; 52 }; 53 54 aliases { 55 ethernet0 = ð0; 56 ethernet1 = ð1; 57 i2c0 = &i2c0; 58 spi1 = &spi1; 59 }; 60 61 memory { 62 device_type = "memory"; 63 reg = <0x00000000 0x80000000>; /* 2 GB */ 64 }; 65 66 soc { 67 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 68 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; 69 70 internal-regs { 71 i2c@11000 { 72 clock-frequency = <100000>; 73 u-boot,i2c-slave-addr = <0x0>; 74 pinctrl-names = "default"; 75 pinctrl-0 = <&i2c0_pins>; 76 status = "okay"; 77 }; 78 79 serial@12000 { 80 /* 81 * Exported on the micro USB connector CON16 82 * through an FTDI 83 */ 84 85 pinctrl-names = "default"; 86 pinctrl-0 = <&uart0_pins>; 87 status = "okay"; 88 u-boot,dm-pre-reloc; 89 }; 90 91 ethernet@34000 { 92 status = "okay"; 93 phy = <&phy1>; 94 phy-mode = "sgmii"; 95 }; 96 97 usb@58000 { 98 status = "okay"; 99 }; 100 101 ethernet@70000 { 102 pinctrl-names = "default"; 103 /* 104 * The Reference Clock 0 is used to provide a 105 * clock to the PHY 106 */ 107 pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; 108 status = "okay"; 109 phy = <&phy0>; 110 phy-mode = "rgmii-id"; 111 }; 112 113 114 mdio@72004 { 115 pinctrl-names = "default"; 116 pinctrl-0 = <&mdio_pins>; 117 118 phy0: ethernet-phy@1 { 119 reg = <1>; 120 }; 121 122 phy1: ethernet-phy@0 { 123 reg = <0>; 124 }; 125 }; 126 127 flash@d0000 { 128 status = "okay"; 129 num-cs = <1>; 130 marvell,nand-keep-config; 131 marvell,nand-enable-arbiter; 132 nand-on-flash-bbt; 133 }; 134 }; 135 136 pcie-controller { 137 status = "okay"; 138 pcie@1,0 { 139 /* Port 0, Lane 0 */ 140 status = "okay"; 141 }; 142 143 }; 144 }; 145}; 146 147&spi1 { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&spi1_pins>; 150 status = "okay"; 151 u-boot,dm-pre-reloc; 152 153 spi-flash@0 { 154 u-boot,dm-pre-reloc; 155 #address-cells = <1>; 156 #size-cells = <1>; 157 compatible = "st,m25p128", "jedec,spi-nor", "spi-flash"; 158 reg = <0>; /* Chip select 0 */ 159 spi-max-frequency = <50000000>; 160 m25p,fast-read; 161 }; 162}; 163 164&refclk { 165 clock-frequency = <20000000>; 166}; 167