1/* 2 * Device Tree file for Marvell Armada 3720 community board 3 * (ESPRESSOBin) 4 * Copyright (C) 2016 Marvell 5 * 6 * Gregory CLEMENT <gregory.clement@free-electrons.com> 7 * Konstantin Porotchkin <kostap@marvell.com> 8 * 9 * This file is dual-licensed: you can use it either under the terms 10 * of the GPL or the X11 license, at your option. Note that this dual 11 * licensing only applies to this file, and not this project as a 12 * whole. 13 * 14 * a) This file is free software; you can redistribute it and/or 15 * modify it under the terms of the GNU General Public License as 16 * published by the Free Software Foundation; either version 2 of the 17 * License, or (at your option) any later version. 18 * 19 * This file is distributed in the hope that it will be useful 20 * but WITHOUT ANY WARRANTY; without even the implied warranty of 21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 * GNU General Public License for more details. 23 * 24 * Or, alternatively 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48/dts-v1/; 49 50#include "armada-372x.dtsi" 51 52/ { 53 model = "Marvell Armada 3720 Community Board ESPRESSOBin"; 54 compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710"; 55 56 chosen { 57 stdout-path = "serial0:115200n8"; 58 }; 59 60 aliases { 61 ethernet0 = ð0; 62 i2c0 = &i2c0; 63 spi0 = &spi0; 64 }; 65 66 memory { 67 device_type = "memory"; 68 reg = <0x00000000 0x00000000 0x00000000 0x20000000>; 69 }; 70}; 71 72&comphy { 73 max-lanes = <3>; 74 phy0 { 75 phy-type = <PHY_TYPE_PEX0>; 76 phy-speed = <PHY_SPEED_2_5G>; 77 }; 78 79 phy1 { 80 phy-type = <PHY_TYPE_USB3_HOST0>; 81 phy-speed = <PHY_SPEED_5G>; 82 }; 83 84 phy2 { 85 phy-type = <PHY_TYPE_SATA0>; 86 phy-speed = <PHY_SPEED_5G>; 87 }; 88}; 89 90ð0 { 91 status = "okay"; 92 pinctrl-names = "default"; 93 pinctrl-0 = <&rgmii_pins>, <&smi_pins>; 94 phy-mode = "rgmii"; 95 phy_addr = <0x1>; 96 fixed-link { 97 speed = <1000>; 98 full-duplex; 99 }; 100}; 101 102&i2c0 { 103 pinctrl-names = "default"; 104 pinctrl-0 = <&i2c1_pins>; 105 status = "okay"; 106}; 107 108/* CON3 */ 109&sata { 110 status = "okay"; 111}; 112 113&spi0 { 114 status = "okay"; 115 pinctrl-names = "default"; 116 pinctrl-0 = <&spi_quad_pins>; 117 118 spi-flash@0 { 119 #address-cells = <1>; 120 #size-cells = <1>; 121 compatible = "st,m25p128", "spi-flash"; 122 reg = <0>; /* Chip select 0 */ 123 spi-max-frequency = <50000000>; 124 m25p,fast-read; 125 }; 126}; 127 128/* Exported on the micro USB connector CON32 through an FTDI */ 129&uart0 { 130 pinctrl-names = "default"; 131 pinctrl-0 = <&uart1_pins>; 132 status = "okay"; 133}; 134 135/* CON29 */ 136&usb2 { 137 status = "okay"; 138}; 139 140/* CON31 */ 141&usb3 { 142 status = "okay"; 143}; 144 145&pcie0 { 146 pinctrl-names = "default"; 147 pinctrl-0 = <&pcie_pins>; 148 reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>; 149 status = "okay"; 150}; 151