1/* 2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8/dts-v1/; 9 10#include "dra74x.dtsi" 11#include <dt-bindings/gpio/gpio.h> 12#include <dt-bindings/interrupt-controller/irq.h> 13 14/ { 15 model = "TI AM5728 BeagleBoard-X15"; 16 compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; 17 18 chosen { 19 stdout-path = &uart3; 20 }; 21 22 aliases { 23 rtc0 = &mcp_rtc; 24 rtc1 = &tps659038_rtc; 25 rtc2 = &rtc; 26 display0 = &hdmi0; 27 }; 28 29 memory { 30 device_type = "memory"; 31 reg = <0x80000000 0x80000000>; 32 }; 33 34 vdd_3v3: fixedregulator-vdd_3v3 { 35 compatible = "regulator-fixed"; 36 regulator-name = "vdd_3v3"; 37 vin-supply = <®en1>; 38 regulator-min-microvolt = <3300000>; 39 regulator-max-microvolt = <3300000>; 40 }; 41 42 vtt_fixed: fixedregulator-vtt { 43 /* TPS51200 */ 44 compatible = "regulator-fixed"; 45 regulator-name = "vtt_fixed"; 46 vin-supply = <&smps3_reg>; 47 regulator-min-microvolt = <3300000>; 48 regulator-max-microvolt = <3300000>; 49 regulator-always-on; 50 regulator-boot-on; 51 enable-active-high; 52 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; 53 }; 54 55 leds { 56 compatible = "gpio-leds"; 57 pinctrl-names = "default"; 58 pinctrl-0 = <&leds_pins_default>; 59 60 led@0 { 61 label = "beagle-x15:usr0"; 62 gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; 63 linux,default-trigger = "heartbeat"; 64 default-state = "off"; 65 }; 66 67 led@1 { 68 label = "beagle-x15:usr1"; 69 gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; 70 linux,default-trigger = "cpu0"; 71 default-state = "off"; 72 }; 73 74 led@2 { 75 label = "beagle-x15:usr2"; 76 gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; 77 linux,default-trigger = "mmc0"; 78 default-state = "off"; 79 }; 80 81 led@3 { 82 label = "beagle-x15:usr3"; 83 gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; 84 linux,default-trigger = "ide-disk"; 85 default-state = "off"; 86 }; 87 }; 88 89 gpio_fan: gpio_fan { 90 /* Based on 5v 500mA AFB02505HHB */ 91 compatible = "gpio-fan"; 92 gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; 93 gpio-fan,speed-map = <0 0>, 94 <13000 1>; 95 #cooling-cells = <2>; 96 }; 97 98 extcon_usb1: extcon_usb1 { 99 compatible = "linux,extcon-usb-gpio"; 100 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; 101 pinctrl-names = "default"; 102 pinctrl-0 = <&extcon_usb1_pins>; 103 }; 104 105 extcon_usb2: extcon_usb2 { 106 compatible = "linux,extcon-usb-gpio"; 107 id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; 108 pinctrl-names = "default"; 109 pinctrl-0 = <&extcon_usb2_pins>; 110 }; 111 112 hdmi0: connector { 113 compatible = "hdmi-connector"; 114 label = "hdmi"; 115 116 type = "a"; 117 118 port { 119 hdmi_connector_in: endpoint { 120 remote-endpoint = <&tpd12s015_out>; 121 }; 122 }; 123 }; 124 125 tpd12s015: encoder { 126 compatible = "ti,tpd12s015"; 127 128 pinctrl-names = "default"; 129 pinctrl-0 = <&tpd12s015_pins>; 130 131 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ 132 <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ 133 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ 134 135 ports { 136 #address-cells = <1>; 137 #size-cells = <0>; 138 139 port@0 { 140 reg = <0>; 141 142 tpd12s015_in: endpoint { 143 remote-endpoint = <&hdmi_out>; 144 }; 145 }; 146 147 port@1 { 148 reg = <1>; 149 150 tpd12s015_out: endpoint { 151 remote-endpoint = <&hdmi_connector_in>; 152 }; 153 }; 154 }; 155 }; 156}; 157 158&dra7_pmx_core { 159 leds_pins_default: leds_pins_default { 160 pinctrl-single,pins = < 161 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ 162 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ 163 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ 164 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ 165 >; 166 }; 167 168 i2c1_pins_default: i2c1_pins_default { 169 pinctrl-single,pins = < 170 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ 171 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ 172 >; 173 }; 174 175 hdmi_pins: pinmux_hdmi_pins { 176 pinctrl-single,pins = < 177 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ 178 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ 179 >; 180 }; 181 182 i2c3_pins_default: i2c3_pins_default { 183 pinctrl-single,pins = < 184 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ 185 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ 186 >; 187 }; 188 189 uart3_pins_default: uart3_pins_default { 190 pinctrl-single,pins = < 191 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ 192 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ 193 >; 194 }; 195 196 mmc1_pins_default: mmc1_pins_default { 197 pinctrl-single,pins = < 198 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ 199 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ 200 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ 201 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ 202 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ 203 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ 204 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ 205 >; 206 }; 207 208 mmc2_pins_default: mmc2_pins_default { 209 pinctrl-single,pins = < 210 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ 211 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ 212 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ 213 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ 214 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ 215 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ 216 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ 217 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ 218 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ 219 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ 220 >; 221 }; 222 223 cpsw_pins_default: cpsw_pins_default { 224 pinctrl-single,pins = < 225 /* Slave 1 */ 226 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ 227 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ 228 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ 229 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ 230 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ 231 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ 232 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ 233 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ 234 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ 235 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ 236 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ 237 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ 238 239 /* Slave 2 */ 240 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ 241 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ 242 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ 243 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ 244 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ 245 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ 246 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ 247 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ 248 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ 249 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ 250 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ 251 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ 252 >; 253 254 }; 255 256 cpsw_pins_sleep: cpsw_pins_sleep { 257 pinctrl-single,pins = < 258 /* Slave 1 */ 259 0x250 (PIN_INPUT | MUX_MODE15) 260 0x254 (PIN_INPUT | MUX_MODE15) 261 0x258 (PIN_INPUT | MUX_MODE15) 262 0x25c (PIN_INPUT | MUX_MODE15) 263 0x260 (PIN_INPUT | MUX_MODE15) 264 0x264 (PIN_INPUT | MUX_MODE15) 265 0x268 (PIN_INPUT | MUX_MODE15) 266 0x26c (PIN_INPUT | MUX_MODE15) 267 0x270 (PIN_INPUT | MUX_MODE15) 268 0x274 (PIN_INPUT | MUX_MODE15) 269 0x278 (PIN_INPUT | MUX_MODE15) 270 0x27c (PIN_INPUT | MUX_MODE15) 271 272 /* Slave 2 */ 273 0x198 (PIN_INPUT | MUX_MODE15) 274 0x19c (PIN_INPUT | MUX_MODE15) 275 0x1a0 (PIN_INPUT | MUX_MODE15) 276 0x1a4 (PIN_INPUT | MUX_MODE15) 277 0x1a8 (PIN_INPUT | MUX_MODE15) 278 0x1ac (PIN_INPUT | MUX_MODE15) 279 0x1b0 (PIN_INPUT | MUX_MODE15) 280 0x1b4 (PIN_INPUT | MUX_MODE15) 281 0x1b8 (PIN_INPUT | MUX_MODE15) 282 0x1bc (PIN_INPUT | MUX_MODE15) 283 0x1c0 (PIN_INPUT | MUX_MODE15) 284 0x1c4 (PIN_INPUT | MUX_MODE15) 285 >; 286 }; 287 288 davinci_mdio_pins_default: davinci_mdio_pins_default { 289 pinctrl-single,pins = < 290 /* MDIO */ 291 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ 292 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ 293 >; 294 }; 295 296 davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { 297 pinctrl-single,pins = < 298 0x23c (PIN_INPUT | MUX_MODE15) 299 0x240 (PIN_INPUT | MUX_MODE15) 300 >; 301 }; 302 303 tps659038_pins_default: tps659038_pins_default { 304 pinctrl-single,pins = < 305 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ 306 >; 307 }; 308 309 tmp102_pins_default: tmp102_pins_default { 310 pinctrl-single,pins = < 311 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ 312 >; 313 }; 314 315 mcp79410_pins_default: mcp79410_pins_default { 316 pinctrl-single,pins = < 317 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ 318 >; 319 }; 320 321 usb1_pins: pinmux_usb1_pins { 322 pinctrl-single,pins = < 323 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ 324 >; 325 }; 326 327 extcon_usb1_pins: extcon_usb1_pins { 328 pinctrl-single,pins = < 329 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ 330 >; 331 }; 332 333 extcon_usb2_pins: extcon_usb2_pins { 334 pinctrl-single,pins = < 335 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ 336 >; 337 }; 338 339 tpd12s015_pins: pinmux_tpd12s015_pins { 340 pinctrl-single,pins = < 341 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ 342 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ 343 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ 344 >; 345 }; 346}; 347 348&i2c1 { 349 status = "okay"; 350 pinctrl-names = "default"; 351 pinctrl-0 = <&i2c1_pins_default>; 352 clock-frequency = <400000>; 353 354 tps659038: tps659038@58 { 355 compatible = "ti,tps659038"; 356 reg = <0x58>; 357 interrupt-parent = <&gpio1>; 358 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 359 360 pinctrl-names = "default"; 361 pinctrl-0 = <&tps659038_pins_default>; 362 363 #interrupt-cells = <2>; 364 interrupt-controller; 365 366 ti,system-power-controller; 367 368 tps659038_pmic { 369 compatible = "ti,tps659038-pmic"; 370 371 regulators { 372 smps12_reg: smps12 { 373 /* VDD_MPU */ 374 regulator-name = "smps12"; 375 regulator-min-microvolt = < 850000>; 376 regulator-max-microvolt = <1250000>; 377 regulator-always-on; 378 regulator-boot-on; 379 }; 380 381 smps3_reg: smps3 { 382 /* VDD_DDR */ 383 regulator-name = "smps3"; 384 regulator-min-microvolt = <1350000>; 385 regulator-max-microvolt = <1350000>; 386 regulator-always-on; 387 regulator-boot-on; 388 }; 389 390 smps45_reg: smps45 { 391 /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ 392 regulator-name = "smps45"; 393 regulator-min-microvolt = < 850000>; 394 regulator-max-microvolt = <1150000>; 395 regulator-always-on; 396 regulator-boot-on; 397 }; 398 399 smps6_reg: smps6 { 400 /* VDD_CORE */ 401 regulator-name = "smps6"; 402 regulator-min-microvolt = <850000>; 403 regulator-max-microvolt = <1030000>; 404 regulator-always-on; 405 regulator-boot-on; 406 }; 407 408 /* SMPS7 unused */ 409 410 smps8_reg: smps8 { 411 /* VDD_1V8 */ 412 regulator-name = "smps8"; 413 regulator-min-microvolt = <1800000>; 414 regulator-max-microvolt = <1800000>; 415 regulator-always-on; 416 regulator-boot-on; 417 }; 418 419 /* SMPS9 unused */ 420 421 ldo1_reg: ldo1 { 422 /* VDD_SD */ 423 regulator-name = "ldo1"; 424 regulator-min-microvolt = <1800000>; 425 regulator-max-microvolt = <3300000>; 426 regulator-boot-on; 427 }; 428 429 ldo2_reg: ldo2 { 430 /* VDD_SHV5 */ 431 regulator-name = "ldo2"; 432 regulator-min-microvolt = <3300000>; 433 regulator-max-microvolt = <3300000>; 434 regulator-always-on; 435 regulator-boot-on; 436 }; 437 438 ldo3_reg: ldo3 { 439 /* VDDA_1V8_PHY */ 440 regulator-name = "ldo3"; 441 regulator-min-microvolt = <1800000>; 442 regulator-max-microvolt = <1800000>; 443 regulator-always-on; 444 regulator-boot-on; 445 }; 446 447 ldo9_reg: ldo9 { 448 /* VDD_RTC */ 449 regulator-name = "ldo9"; 450 regulator-min-microvolt = <1050000>; 451 regulator-max-microvolt = <1050000>; 452 regulator-always-on; 453 regulator-boot-on; 454 }; 455 456 ldoln_reg: ldoln { 457 /* VDDA_1V8_PLL */ 458 regulator-name = "ldoln"; 459 regulator-min-microvolt = <1800000>; 460 regulator-max-microvolt = <1800000>; 461 regulator-always-on; 462 regulator-boot-on; 463 }; 464 465 ldousb_reg: ldousb { 466 /* VDDA_3V_USB: VDDA_USBHS33 */ 467 regulator-name = "ldousb"; 468 regulator-min-microvolt = <3300000>; 469 regulator-max-microvolt = <3300000>; 470 regulator-boot-on; 471 }; 472 473 regen1: regen1 { 474 /* VDD_3V3_ON */ 475 regulator-name = "regen1"; 476 regulator-boot-on; 477 regulator-always-on; 478 }; 479 }; 480 }; 481 482 tps659038_rtc: tps659038_rtc { 483 compatible = "ti,palmas-rtc"; 484 interrupt-parent = <&tps659038>; 485 interrupts = <8 IRQ_TYPE_EDGE_FALLING>; 486 wakeup-source; 487 }; 488 489 tps659038_pwr_button: tps659038_pwr_button { 490 compatible = "ti,palmas-pwrbutton"; 491 interrupt-parent = <&tps659038>; 492 interrupts = <1 IRQ_TYPE_EDGE_FALLING>; 493 wakeup-source; 494 ti,palmas-long-press-seconds = <12>; 495 }; 496 497 tps659038_gpio: tps659038_gpio { 498 compatible = "ti,palmas-gpio"; 499 gpio-controller; 500 #gpio-cells = <2>; 501 }; 502 }; 503 504 tmp102: tmp102@48 { 505 compatible = "ti,tmp102"; 506 reg = <0x48>; 507 pinctrl-names = "default"; 508 pinctrl-0 = <&tmp102_pins_default>; 509 interrupt-parent = <&gpio7>; 510 interrupts = <16 IRQ_TYPE_LEVEL_LOW>; 511 #thermal-sensor-cells = <1>; 512 }; 513}; 514 515&i2c3 { 516 status = "okay"; 517 pinctrl-names = "default"; 518 pinctrl-0 = <&i2c3_pins_default>; 519 clock-frequency = <400000>; 520 521 mcp_rtc: rtc@6f { 522 compatible = "microchip,mcp7941x"; 523 reg = <0x6f>; 524 interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */ 525 526 pinctrl-names = "default"; 527 pinctrl-0 = <&mcp79410_pins_default>; 528 529 vcc-supply = <&vdd_3v3>; 530 wakeup-source; 531 }; 532}; 533 534&gpio7 { 535 ti,no-reset-on-init; 536 ti,no-idle-on-init; 537}; 538 539&cpu0 { 540 cpu0-supply = <&smps12_reg>; 541 voltage-tolerance = <1>; 542}; 543 544&uart3 { 545 status = "okay"; 546 interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, 547 <&dra7_pmx_core 0x3f8>; 548 549 pinctrl-names = "default"; 550 pinctrl-0 = <&uart3_pins_default>; 551}; 552 553&mac { 554 status = "okay"; 555 pinctrl-names = "default", "sleep"; 556 pinctrl-0 = <&cpsw_pins_default>; 557 pinctrl-1 = <&cpsw_pins_sleep>; 558 dual_emac; 559}; 560 561&cpsw_emac0 { 562 phy_id = <&davinci_mdio>, <1>; 563 phy-mode = "rgmii"; 564 dual_emac_res_vlan = <1>; 565}; 566 567&cpsw_emac1 { 568 phy_id = <&davinci_mdio>, <2>; 569 phy-mode = "rgmii"; 570 dual_emac_res_vlan = <2>; 571}; 572 573&davinci_mdio { 574 pinctrl-names = "default", "sleep"; 575 pinctrl-0 = <&davinci_mdio_pins_default>; 576 pinctrl-1 = <&davinci_mdio_pins_sleep>; 577}; 578 579&mmc1 { 580 status = "okay"; 581 582 pinctrl-names = "default"; 583 pinctrl-0 = <&mmc1_pins_default>; 584 585 vmmc-supply = <&ldo1_reg>; 586 vmmc_aux-supply = <&vdd_3v3>; 587 pbias-supply = <&pbias_mmc_reg>; 588 bus-width = <4>; 589 cd-gpios = <&gpio6 27 0>; /* gpio 219 */ 590}; 591 592&mmc2 { 593 status = "okay"; 594 595 pinctrl-names = "default"; 596 pinctrl-0 = <&mmc2_pins_default>; 597 598 vmmc-supply = <&vdd_3v3>; 599 bus-width = <8>; 600 ti,non-removable; 601 cap-mmc-dual-data-rate; 602}; 603 604&sata { 605 status = "okay"; 606}; 607 608&usb2_phy1 { 609 phy-supply = <&ldousb_reg>; 610}; 611 612&usb2_phy2 { 613 phy-supply = <&ldousb_reg>; 614}; 615 616&usb1 { 617 dr_mode = "host"; 618 pinctrl-names = "default"; 619 pinctrl-0 = <&usb1_pins>; 620}; 621 622&omap_dwc3_1 { 623 extcon = <&extcon_usb1>; 624}; 625 626&omap_dwc3_2 { 627 extcon = <&extcon_usb2>; 628}; 629 630&usb2 { 631 dr_mode = "peripheral"; 632}; 633 634&cpu_trips { 635 cpu_alert1: cpu_alert1 { 636 temperature = <50000>; /* millicelsius */ 637 hysteresis = <2000>; /* millicelsius */ 638 type = "active"; 639 }; 640}; 641 642&cpu_cooling_maps { 643 map1 { 644 trip = <&cpu_alert1>; 645 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 646 }; 647}; 648 649&thermal_zones { 650 board_thermal: board_thermal { 651 polling-delay-passive = <1250>; /* milliseconds */ 652 polling-delay = <1500>; /* milliseconds */ 653 654 /* sensor ID */ 655 thermal-sensors = <&tmp102 0>; 656 657 board_trips: trips { 658 board_alert0: board_alert { 659 temperature = <40000>; /* millicelsius */ 660 hysteresis = <2000>; /* millicelsius */ 661 type = "active"; 662 }; 663 664 board_crit: board_crit { 665 temperature = <105000>; /* millicelsius */ 666 hysteresis = <0>; /* millicelsius */ 667 type = "critical"; 668 }; 669 }; 670 671 board_cooling_maps: cooling-maps { 672 map0 { 673 trip = <&board_alert0>; 674 cooling-device = 675 <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 676 }; 677 }; 678 }; 679}; 680 681&dss { 682 status = "ok"; 683 684 vdda_video-supply = <&ldoln_reg>; 685}; 686 687&hdmi { 688 status = "ok"; 689 vdda-supply = <&ldo3_reg>; 690 691 pinctrl-names = "default"; 692 pinctrl-0 = <&hdmi_pins>; 693 694 port { 695 hdmi_out: endpoint { 696 remote-endpoint = <&tpd12s015_in>; 697 }; 698 }; 699}; 700