1/* 2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9/* AM437x GP EVM */ 10 11/dts-v1/; 12 13#include "am4372.dtsi" 14#include <dt-bindings/pinctrl/am43xx.h> 15#include <dt-bindings/pwm/pwm.h> 16#include <dt-bindings/gpio/gpio.h> 17 18/ { 19 model = "TI AM437x GP EVM"; 20 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; 21 22 aliases { 23 display0 = &lcd0; 24 serial3 = &uart3; 25 }; 26 27 chosen { 28 stdout-path = &uart0; 29 tick-timer = &timer2; 30 }; 31 32 vmmcsd_fixed: fixedregulator-sd { 33 compatible = "regulator-fixed"; 34 regulator-name = "vmmcsd_fixed"; 35 regulator-min-microvolt = <3300000>; 36 regulator-max-microvolt = <3300000>; 37 enable-active-high; 38 }; 39 40 vtt_fixed: fixedregulator-vtt { 41 compatible = "regulator-fixed"; 42 regulator-name = "vtt_fixed"; 43 regulator-min-microvolt = <1500000>; 44 regulator-max-microvolt = <1500000>; 45 regulator-always-on; 46 regulator-boot-on; 47 enable-active-high; 48 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; 49 }; 50 51 vmmcwl_fixed: fixedregulator-mmcwl { 52 compatible = "regulator-fixed"; 53 regulator-name = "vmmcwl_fixed"; 54 regulator-min-microvolt = <1800000>; 55 regulator-max-microvolt = <1800000>; 56 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; 57 enable-active-high; 58 }; 59 60 backlight { 61 compatible = "pwm-backlight"; 62 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; 63 brightness-levels = <0 51 53 56 62 75 101 152 255>; 64 default-brightness-level = <8>; 65 }; 66 67 matrix_keypad: matrix_keypad@0 { 68 compatible = "gpio-matrix-keypad"; 69 debounce-delay-ms = <5>; 70 col-scan-delay-us = <2>; 71 72 row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */ 73 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ 74 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ 75 76 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */ 77 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */ 78 79 linux,keymap = <0x00000201 /* P1 */ 80 0x00010202 /* P2 */ 81 0x01000067 /* UP */ 82 0x0101006a /* RIGHT */ 83 0x02000069 /* LEFT */ 84 0x0201006c>; /* DOWN */ 85 }; 86 87 lcd0: display { 88 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; 89 label = "lcd"; 90 91 pinctrl-names = "default"; 92 pinctrl-0 = <&lcd_pins>; 93 94 /* 95 * SelLCDorHDMI, LOW to select HDMI. This is not really the 96 * panel's enable GPIO, but we don't have HDMI driver support nor 97 * support to switch between two displays, so using this gpio as 98 * panel's enable should be safe. 99 */ 100 enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; 101 102 panel-timing { 103 clock-frequency = <33000000>; 104 hactive = <800>; 105 vactive = <480>; 106 hfront-porch = <210>; 107 hback-porch = <16>; 108 hsync-len = <30>; 109 vback-porch = <10>; 110 vfront-porch = <22>; 111 vsync-len = <13>; 112 hsync-active = <0>; 113 vsync-active = <0>; 114 de-active = <1>; 115 pixelclk-active = <1>; 116 }; 117 118 port { 119 lcd_in: endpoint { 120 remote-endpoint = <&dpi_out>; 121 }; 122 }; 123 }; 124 125 /* fixed 12MHz oscillator */ 126 refclk: oscillator { 127 #clock-cells = <0>; 128 compatible = "fixed-clock"; 129 clock-frequency = <12000000>; 130 }; 131 132}; 133 134&am43xx_pinmux { 135 pinctrl-names = "default", "sleep"; 136 pinctrl-0 = <&wlan_pins_default>; 137 pinctrl-1 = <&wlan_pins_sleep>; 138 139 i2c0_pins: i2c0_pins { 140 pinctrl-single,pins = < 141 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 142 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 143 >; 144 }; 145 146 i2c1_pins: i2c1_pins { 147 pinctrl-single,pins = < 148 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ 149 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ 150 >; 151 }; 152 153 mmc1_pins: pinmux_mmc1_pins { 154 pinctrl-single,pins = < 155 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 156 >; 157 }; 158 159 ecap0_pins: backlight_pins { 160 pinctrl-single,pins = < 161 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ 162 >; 163 }; 164 165 pixcir_ts_pins: pixcir_ts_pins { 166 pinctrl-single,pins = < 167 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ 168 >; 169 }; 170 171 cpsw_default: cpsw_default { 172 pinctrl-single,pins = < 173 /* Slave 1 */ 174 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ 175 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ 176 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ 177 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ 178 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ 179 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ 180 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ 181 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ 182 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ 183 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ 184 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ 185 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ 186 >; 187 }; 188 189 cpsw_sleep: cpsw_sleep { 190 pinctrl-single,pins = < 191 /* Slave 1 reset value */ 192 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) 193 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) 194 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) 195 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) 196 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) 197 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) 198 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) 199 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) 200 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) 201 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) 202 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) 203 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) 204 >; 205 }; 206 207 davinci_mdio_default: davinci_mdio_default { 208 pinctrl-single,pins = < 209 /* MDIO */ 210 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 211 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 212 >; 213 }; 214 215 davinci_mdio_sleep: davinci_mdio_sleep { 216 pinctrl-single,pins = < 217 /* MDIO reset value */ 218 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) 219 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) 220 >; 221 }; 222 223 nand_flash_x8: nand_flash_x8 { 224 pinctrl-single,pins = < 225 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ 226 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ 227 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ 228 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ 229 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ 230 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ 231 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ 232 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ 233 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ 234 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ 235 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ 236 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ 237 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ 238 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ 239 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ 240 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ 241 >; 242 }; 243 244 dss_pins: dss_pins { 245 pinctrl-single,pins = < 246 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ 247 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) 248 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) 249 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) 250 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) 251 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) 252 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) 253 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ 254 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ 255 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 256 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 257 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) 258 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) 259 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 260 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 261 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) 262 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) 263 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 264 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 265 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) 266 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) 267 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 268 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 269 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ 270 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ 271 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ 272 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ 273 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ 274 275 >; 276 }; 277 278 lcd_pins: lcd_pins { 279 pinctrl-single,pins = < 280 /* GPIO 5_8 to select LCD / HDMI */ 281 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) 282 >; 283 }; 284 285 dcan0_default: dcan0_default_pins { 286 pinctrl-single,pins = < 287 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ 288 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ 289 >; 290 }; 291 292 dcan1_default: dcan1_default_pins { 293 pinctrl-single,pins = < 294 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ 295 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ 296 >; 297 }; 298 299 vpfe0_pins_default: vpfe0_pins_default { 300 pinctrl-single,pins = < 301 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ 302 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ 303 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ 304 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ 305 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ 306 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ 307 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ 308 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ 309 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ 310 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ 311 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ 312 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ 313 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ 314 >; 315 }; 316 317 vpfe0_pins_sleep: vpfe0_pins_sleep { 318 pinctrl-single,pins = < 319 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ 320 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ 321 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ 322 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ 323 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ 324 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ 325 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ 326 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ 327 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ 328 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ 329 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ 330 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ 331 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ 332 >; 333 }; 334 335 vpfe1_pins_default: vpfe1_pins_default { 336 pinctrl-single,pins = < 337 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ 338 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ 339 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ 340 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ 341 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ 342 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ 343 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ 344 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ 345 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ 346 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ 347 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ 348 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ 349 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ 350 >; 351 }; 352 353 vpfe1_pins_sleep: vpfe1_pins_sleep { 354 pinctrl-single,pins = < 355 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ 356 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ 357 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ 358 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ 359 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ 360 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ 361 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ 362 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ 363 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ 364 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ 365 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ 366 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ 367 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ 368 >; 369 }; 370 371 mmc3_pins_default: pinmux_mmc3_pins_default { 372 pinctrl-single,pins = < 373 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ 374 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ 375 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ 376 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ 377 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ 378 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ 379 >; 380 }; 381 382 mmc3_pins_sleep: pinmux_mmc3_pins_sleep { 383 pinctrl-single,pins = < 384 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ 385 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ 386 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ 387 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ 388 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ 389 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ 390 >; 391 }; 392 393 wlan_pins_default: pinmux_wlan_pins_default { 394 pinctrl-single,pins = < 395 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ 396 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ 397 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ 398 >; 399 }; 400 401 wlan_pins_sleep: pinmux_wlan_pins_sleep { 402 pinctrl-single,pins = < 403 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ 404 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ 405 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ 406 >; 407 }; 408 409 uart3_pins: uart3_pins { 410 pinctrl-single,pins = < 411 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ 412 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ 413 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ 414 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ 415 >; 416 }; 417}; 418 419&i2c0 { 420 status = "okay"; 421 pinctrl-names = "default"; 422 pinctrl-0 = <&i2c0_pins>; 423 clock-frequency = <100000>; 424 425 tps65218: tps65218@24 { 426 reg = <0x24>; 427 compatible = "ti,tps65218"; 428 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ 429 interrupt-controller; 430 #interrupt-cells = <2>; 431 432 dcdc1: regulator-dcdc1 { 433 compatible = "ti,tps65218-dcdc1"; 434 regulator-name = "vdd_core"; 435 regulator-min-microvolt = <912000>; 436 regulator-max-microvolt = <1144000>; 437 regulator-boot-on; 438 regulator-always-on; 439 }; 440 441 dcdc2: regulator-dcdc2 { 442 compatible = "ti,tps65218-dcdc2"; 443 regulator-name = "vdd_mpu"; 444 regulator-min-microvolt = <912000>; 445 regulator-max-microvolt = <1378000>; 446 regulator-boot-on; 447 regulator-always-on; 448 }; 449 450 dcdc3: regulator-dcdc3 { 451 compatible = "ti,tps65218-dcdc3"; 452 regulator-name = "vdcdc3"; 453 regulator-min-microvolt = <1500000>; 454 regulator-max-microvolt = <1500000>; 455 regulator-boot-on; 456 regulator-always-on; 457 }; 458 dcdc5: regulator-dcdc5 { 459 compatible = "ti,tps65218-dcdc5"; 460 regulator-name = "v1_0bat"; 461 regulator-min-microvolt = <1000000>; 462 regulator-max-microvolt = <1000000>; 463 }; 464 465 dcdc6: regulator-dcdc6 { 466 compatible = "ti,tps65218-dcdc6"; 467 regulator-name = "v1_8bat"; 468 regulator-min-microvolt = <1800000>; 469 regulator-max-microvolt = <1800000>; 470 }; 471 472 ldo1: regulator-ldo1 { 473 compatible = "ti,tps65218-ldo1"; 474 regulator-min-microvolt = <1800000>; 475 regulator-max-microvolt = <1800000>; 476 regulator-boot-on; 477 regulator-always-on; 478 }; 479 }; 480 481 ov2659@30 { 482 compatible = "ovti,ov2659"; 483 reg = <0x30>; 484 485 clocks = <&refclk 0>; 486 clock-names = "xvclk"; 487 488 port { 489 ov2659_0: endpoint { 490 remote-endpoint = <&vpfe1_ep>; 491 link-frequencies = /bits/ 64 <70000000>; 492 }; 493 }; 494 }; 495}; 496 497&i2c1 { 498 status = "okay"; 499 pinctrl-names = "default"; 500 pinctrl-0 = <&i2c1_pins>; 501 pixcir_ts@5c { 502 compatible = "pixcir,pixcir_tangoc"; 503 pinctrl-names = "default"; 504 pinctrl-0 = <&pixcir_ts_pins>; 505 reg = <0x5c>; 506 interrupt-parent = <&gpio3>; 507 interrupts = <22 0>; 508 509 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 510 511 touchscreen-size-x = <1024>; 512 touchscreen-size-y = <600>; 513 }; 514 515 ov2659@30 { 516 compatible = "ovti,ov2659"; 517 reg = <0x30>; 518 519 clocks = <&refclk 0>; 520 clock-names = "xvclk"; 521 522 port { 523 ov2659_1: endpoint { 524 remote-endpoint = <&vpfe0_ep>; 525 link-frequencies = /bits/ 64 <70000000>; 526 }; 527 }; 528 }; 529}; 530 531&epwmss0 { 532 status = "okay"; 533}; 534 535&tscadc { 536 status = "okay"; 537 538 adc { 539 ti,adc-channels = <0 1 2 3 4 5 6 7>; 540 }; 541}; 542 543&ecap0 { 544 status = "okay"; 545 pinctrl-names = "default"; 546 pinctrl-0 = <&ecap0_pins>; 547}; 548 549&gpio0 { 550 status = "okay"; 551}; 552 553&gpio1 { 554 status = "okay"; 555}; 556 557&gpio3 { 558 status = "okay"; 559}; 560 561&gpio4 { 562 status = "okay"; 563}; 564 565&gpio5 { 566 status = "okay"; 567 ti,no-reset-on-init; 568}; 569 570&mmc1 { 571 status = "okay"; 572 vmmc-supply = <&vmmcsd_fixed>; 573 bus-width = <4>; 574 pinctrl-names = "default"; 575 pinctrl-0 = <&mmc1_pins>; 576 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; 577}; 578 579&mmc3 { 580 /* disable MMC3 as SDIO is not supported in U-Boot */ 581 status = "disabled"; 582 /* these are on the crossbar and are outlined in the 583 xbar-event-map element */ 584 dmas = <&edma 30 585 &edma 31>; 586 dma-names = "tx", "rx"; 587 vmmc-supply = <&vmmcwl_fixed>; 588 bus-width = <4>; 589 pinctrl-names = "default", "sleep"; 590 pinctrl-0 = <&mmc3_pins_default>; 591 pinctrl-1 = <&mmc3_pins_sleep>; 592 cap-power-off-card; 593 keep-power-in-suspend; 594 ti,non-removable; 595 596 #address-cells = <1>; 597 #size-cells = <0>; 598 wlcore: wlcore@0 { 599 compatible = "ti,wl1835"; 600 reg = <2>; 601 interrupt-parent = <&gpio1>; 602 interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; 603 }; 604}; 605 606&edma { 607 ti,edma-xbar-event-map = /bits/ 16 <1 30 608 2 31>; 609}; 610 611&uart3 { 612 status = "okay"; 613 pinctrl-names = "default"; 614 pinctrl-0 = <&uart3_pins>; 615}; 616 617&usb2_phy1 { 618 status = "okay"; 619}; 620 621&usb1 { 622 dr_mode = "peripheral"; 623 status = "okay"; 624}; 625 626&usb2_phy2 { 627 status = "okay"; 628}; 629 630&usb2 { 631 dr_mode = "host"; 632 status = "okay"; 633}; 634 635&mac { 636 slaves = <1>; 637 pinctrl-names = "default", "sleep"; 638 pinctrl-0 = <&cpsw_default>; 639 pinctrl-1 = <&cpsw_sleep>; 640 status = "okay"; 641}; 642 643&davinci_mdio { 644 pinctrl-names = "default", "sleep"; 645 pinctrl-0 = <&davinci_mdio_default>; 646 pinctrl-1 = <&davinci_mdio_sleep>; 647 status = "okay"; 648}; 649 650&cpsw_emac0 { 651 phy_id = <&davinci_mdio>, <0>; 652 phy-mode = "rgmii"; 653}; 654 655&elm { 656 status = "okay"; 657}; 658 659&gpmc { 660 status = "okay"; 661 pinctrl-names = "default"; 662 pinctrl-0 = <&nand_flash_x8>; 663 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ 664 nand@0,0 { 665 reg = <0 0 4>; /* device IO registers */ 666 ti,nand-ecc-opt = "bch16"; 667 ti,elm-id = <&elm>; 668 nand-bus-width = <8>; 669 gpmc,device-width = <1>; 670 gpmc,sync-clk-ps = <0>; 671 gpmc,cs-on-ns = <0>; 672 gpmc,cs-rd-off-ns = <40>; 673 gpmc,cs-wr-off-ns = <40>; 674 gpmc,adv-on-ns = <0>; 675 gpmc,adv-rd-off-ns = <25>; 676 gpmc,adv-wr-off-ns = <25>; 677 gpmc,we-on-ns = <0>; 678 gpmc,we-off-ns = <20>; 679 gpmc,oe-on-ns = <3>; 680 gpmc,oe-off-ns = <30>; 681 gpmc,access-ns = <30>; 682 gpmc,rd-cycle-ns = <40>; 683 gpmc,wr-cycle-ns = <40>; 684 gpmc,wait-pin = <0>; 685 gpmc,bus-turnaround-ns = <0>; 686 gpmc,cycle2cycle-delay-ns = <0>; 687 gpmc,clk-activation-ns = <0>; 688 gpmc,wait-monitoring-ns = <0>; 689 gpmc,wr-access-ns = <40>; 690 gpmc,wr-data-mux-bus-ns = <0>; 691 /* MTD partition table */ 692 /* All SPL-* partitions are sized to minimal length 693 * which can be independently programmable. For 694 * NAND flash this is equal to size of erase-block */ 695 #address-cells = <1>; 696 #size-cells = <1>; 697 partition@0 { 698 label = "NAND.SPL"; 699 reg = <0x00000000 0x00040000>; 700 }; 701 partition@1 { 702 label = "NAND.SPL.backup1"; 703 reg = <0x00040000 0x00040000>; 704 }; 705 partition@2 { 706 label = "NAND.SPL.backup2"; 707 reg = <0x00080000 0x00040000>; 708 }; 709 partition@3 { 710 label = "NAND.SPL.backup3"; 711 reg = <0x000c0000 0x00040000>; 712 }; 713 partition@4 { 714 label = "NAND.u-boot-spl-os"; 715 reg = <0x00100000 0x00080000>; 716 }; 717 partition@5 { 718 label = "NAND.u-boot"; 719 reg = <0x00180000 0x00100000>; 720 }; 721 partition@6 { 722 label = "NAND.u-boot-env"; 723 reg = <0x00280000 0x00040000>; 724 }; 725 partition@7 { 726 label = "NAND.u-boot-env.backup1"; 727 reg = <0x002c0000 0x00040000>; 728 }; 729 partition@8 { 730 label = "NAND.kernel"; 731 reg = <0x00300000 0x00700000>; 732 }; 733 partition@9 { 734 label = "NAND.file-system"; 735 reg = <0x00a00000 0x1f600000>; 736 }; 737 }; 738}; 739 740&dss { 741 status = "ok"; 742 743 pinctrl-names = "default"; 744 pinctrl-0 = <&dss_pins>; 745 746 port { 747 dpi_out: endpoint@0 { 748 remote-endpoint = <&lcd_in>; 749 data-lines = <24>; 750 }; 751 }; 752}; 753 754&dcan0 { 755 pinctrl-names = "default"; 756 pinctrl-0 = <&dcan0_default>; 757 status = "okay"; 758}; 759 760&dcan1 { 761 pinctrl-names = "default"; 762 pinctrl-0 = <&dcan1_default>; 763 status = "okay"; 764}; 765 766&vpfe0 { 767 status = "okay"; 768 pinctrl-names = "default", "sleep"; 769 pinctrl-0 = <&vpfe0_pins_default>; 770 pinctrl-1 = <&vpfe0_pins_sleep>; 771 772 port { 773 vpfe0_ep: endpoint { 774 remote-endpoint = <&ov2659_1>; 775 ti,am437x-vpfe-interface = <0>; 776 bus-width = <8>; 777 hsync-active = <0>; 778 vsync-active = <0>; 779 }; 780 }; 781}; 782 783&vpfe1 { 784 status = "okay"; 785 pinctrl-names = "default", "sleep"; 786 pinctrl-0 = <&vpfe1_pins_default>; 787 pinctrl-1 = <&vpfe1_pins_sleep>; 788 789 port { 790 vpfe1_ep: endpoint { 791 remote-endpoint = <&ov2659_0>; 792 ti,am437x-vpfe-interface = <0>; 793 bus-width = <8>; 794 hsync-active = <0>; 795 vsync-active = <0>; 796 }; 797 }; 798}; 799