1/* 2 * pdu001.dts 3 * 4 * EETS GmbH PDU001 board device tree file 5 * 6 * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ 7 * 8 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13/dts-v1/; 14 15#include "am33xx.dtsi" 16#include <dt-bindings/interrupt-controller/irq.h> 17#include <dt-bindings/leds/leds-pca9532.h> 18 19/ { 20 model = "EETS,PDU001"; 21 compatible = "eets,pdu001", "ti,am33xx"; 22 23 chosen { 24 stdout-path = &uart3; 25 }; 26 27 cpus { 28 cpu@0 { 29 cpu0-supply = <&vdd1_reg>; 30 }; 31 }; 32 33 memory { 34 device_type = "memory"; 35 reg = <0x80000000 0x10000000>; /* 256 MB */ 36 }; 37 38 vbat: fixedregulator@0 { 39 compatible = "regulator-fixed"; 40 regulator-name = "vbat"; 41 regulator-min-microvolt = <3600000>; 42 regulator-max-microvolt = <3600000>; 43 regulator-boot-on; 44 }; 45 46 lis3_reg: fixedregulator@1 { 47 compatible = "regulator-fixed"; 48 regulator-name = "lis3_reg"; 49 regulator-boot-on; 50 }; 51 52 panel { 53 compatible = "ti,tilcdc,panel"; 54 status = "okay"; 55 pinctrl-names = "default"; 56 pinctrl-0 = <&lcd_pins_s0>; 57 panel-info { 58 ac-bias = <255>; 59 ac-bias-intrpt = <0>; 60 dma-burst-sz = <16>; 61 bpp = <16>; 62 fdd = <0x80>; 63 sync-edge = <0>; 64 sync-ctrl = <1>; 65 raster-order = <0>; 66 fifo-th = <0>; 67 }; 68 69 display-timings { 70 240x320p16 { 71 clock-frequency = <6500000>; 72 hactive = <240>; 73 vactive = <320>; 74 hfront-porch = <6>; 75 hback-porch = <6>; 76 hsync-len = <1>; 77 vback-porch = <6>; 78 vfront-porch = <6>; 79 vsync-len = <1>; 80 hsync-active = <0>; 81 vsync-active = <0>; 82 pixelclk-active = <1>; 83 de-active = <0>; 84 }; 85 }; 86 }; 87}; 88 89&am33xx_pinmux { 90 pinctrl-names = "default"; 91 pinctrl-0 = <&clkout2_pin>; 92 93 i2c0_pins: pinmux_i2c0_pins { 94 pinctrl-single,pins = < 95 AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 96 AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 97 >; 98 }; 99 100 i2c1_pins: pinmux_i2c1_pins { 101 pinctrl-single,pins = < 102 AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ 103 AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ 104 >; 105 }; 106 107 i2c2_pins: pinmux_i2c2_pins { 108 pinctrl-single,pins = < 109 AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */ 110 AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */ 111 >; 112 }; 113 114 spi1_pins: pinmux_spi1_pins { 115 pinctrl-single,pins = < 116 AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */ 117 AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ 118 AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ 119 AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ 120 >; 121 }; 122 123 uart0_pins: pinmux_uart0_pins { 124 pinctrl-single,pins = < 125 AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ 126 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 127 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ 128 >; 129 }; 130 131 uart1_pins: pinmux_uart1_pins { 132 pinctrl-single,pins = < 133 AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ 134 AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ 135 >; 136 }; 137 138 uart3_pins: pinmux_uart3_pins { 139 pinctrl-single,pins = < 140 AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */ 141 AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ 142 >; 143 }; 144 145 clkout2_pin: pinmux_clkout2_pin { 146 pinctrl-single,pins = < 147 AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ 148 >; 149 }; 150 151 cpsw_default: cpsw_default { 152 pinctrl-single,pins = < 153 /* Port 1 (emac0) */ 154 AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ 155 AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ 156 AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */ 157 AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */ 158 AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ 159 AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ 160 AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ 161 AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ 162 AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ 163 AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */ 164 AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ 165 AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ 166 AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ 167 AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ 168 AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ 169 170 /* Port 2 (emac1) */ 171 AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */ 172 AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */ 173 AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */ 174 AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */ 175 AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */ 176 AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */ 177 AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */ 178 AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */ 179 AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */ 180 AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */ 181 AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */ 182 AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */ 183 AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */ 184 AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */ 185 AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */ 186 >; 187 }; 188 189 davinci_mdio_default: davinci_mdio_default { 190 pinctrl-single,pins = < 191 AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 192 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 193 >; 194 }; 195 196 mmc1_pins: pinmux_mmc1_pins { 197 /* eMMC */ 198 pinctrl-single,pins = < 199 AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ 200 AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ 201 AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ 202 AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ 203 AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ 204 AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ 205 >; 206 }; 207 208 mmc2_pins: pinmux_mmc2_pins { 209 /* SD cardcage */ 210 pinctrl-single,pins = < 211 AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ 212 AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ 213 AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ 214 AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ 215 AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ 216 AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ 217 /* card change signal for frontpanel SD cardcage */ 218 AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ 219 >; 220 }; 221 222 lcd_pins_s0: lcd_pins_s0 { 223 pinctrl-single,pins = < 224 AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ 225 AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ 226 AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ 227 AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ 228 AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ 229 AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ 230 AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ 231 AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ 232 AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ 233 AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ 234 AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ 235 AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ 236 AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ 237 AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ 238 AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ 239 AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ 240 AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ 241 AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ 242 AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ 243 AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ 244 >; 245 }; 246 247 dcan0_pins: pinmux_dcan0_pins { 248 pinctrl-single,pins = < 249 AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ 250 AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ 251 >; 252 }; 253}; 254 255&uart0 { 256 pinctrl-names = "default"; 257 pinctrl-0 = <&uart0_pins>; 258 259 rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; 260 rs485-rts-active-high; 261 rs485-rts-delay = <0 0>; 262 linux,rs485-enabled-at-boot-time; 263 264 status = "okay"; 265}; 266 267&uart1 { 268 pinctrl-names = "default"; 269 pinctrl-0 = <&uart1_pins>; 270 271 status = "okay"; 272}; 273 274&uart3 { 275 pinctrl-names = "default"; 276 pinctrl-0 = <&uart3_pins>; 277 278 status = "okay"; 279}; 280 281&i2c0 { 282 pinctrl-names = "default"; 283 pinctrl-0 = <&i2c0_pins>; 284 285 status = "okay"; 286 clock-frequency = <400000>; 287 288 tps: tps@2d { 289 reg = <0x2d>; 290 }; 291 292 m2_eeprom: m2_eeprom@50 { 293 compatible = "atmel,24c256"; 294 reg = <0x50>; 295 status = "okay"; 296 }; 297}; 298 299&i2c1 { 300 pinctrl-names = "default"; 301 pinctrl-0 = <&i2c1_pins>; 302 303 status = "okay"; 304 clock-frequency = <100000>; 305 306 board_24aa025e48: board_24aa025e48@50 { 307 compatible = "microchip,24aa025e48"; 308 reg = <0x50>; 309 }; 310 311 backplane_24aa025e48: backplane_24aa025e48@53 { 312 compatible = "microchip,24aa025e48"; 313 reg = <0x53>; 314 }; 315 316 pca9532: pca9532@60 { 317 compatible = "nxp,pca9532"; 318 reg = <0x60>; 319 psc0 = <0x97>; 320 pwm0 = <0x80>; 321 psc1 = <0x97>; 322 pwm1 = <0x10>; 323 324 run.red@0 { 325 type = <PCA9532_TYPE_LED>; 326 }; 327 run.green@1 { 328 type = <PCA9532_TYPE_LED>; 329 default-state = "on"; 330 }; 331 s2.red@2 { 332 type = <PCA9532_TYPE_LED>; 333 }; 334 s2.green@3 { 335 type = <PCA9532_TYPE_LED>; 336 }; 337 s1.yellow@4 { 338 type = <PCA9532_TYPE_LED>; 339 }; 340 s1.green@5 { 341 type = <PCA9532_TYPE_LED>; 342 }; 343 }; 344 345 pca9530: pca9530@61 { 346 compatible = "nxp,pca9530"; 347 reg = <0x61>; 348 349 tft-panel@0 { 350 type = <PCA9532_TYPE_LED>; 351 linux,default-trigger = "backlight"; 352 default-state = "on"; 353 }; 354 }; 355 356 mcp79400: mcp79400@6f { 357 compatible = "microchip,mcp7940x"; 358 reg = <0x6f>; 359 }; 360}; 361 362&i2c2 { 363 pinctrl-names = "default"; 364 pinctrl-0 = <&i2c2_pins>; 365 366 status = "okay"; 367 clock-frequency = <100000>; 368}; 369 370&spi1 { 371 pinctrl-names = "default"; 372 pinctrl-0 = <&spi1_pins>; 373 ti,pindir-d0-out-d1-in; 374 status = "okay"; 375 376 cfaf240320a032t { 377 compatible = "orise,otm3225a"; 378 reg = <0>; 379 spi-max-frequency = <1000000>; 380 // SPI mode 3 381 spi-cpol; 382 spi-cpha; 383 status = "okay"; 384 }; 385}; 386 387&usb { 388 status = "okay"; 389}; 390 391&usb_ctrl_mod { 392 status = "okay"; 393}; 394 395&usb0_phy { 396 status = "okay"; 397}; 398 399&usb1_phy { 400 status = "okay"; 401}; 402 403&usb0 { 404 status = "okay"; 405}; 406 407&usb1 { 408 status = "okay"; 409}; 410 411&cppi41dma { 412 status = "okay"; 413}; 414 415/* 416 * Disable soc's rtc as we have no VBAT for it. This makes the board 417 * rtc (Microchip MCP79400) the default rtc device 'rtc0'. 418 */ 419&rtc { 420 status = "disabled"; 421}; 422 423&lcdc { 424 status = "okay"; 425}; 426 427&elm { 428 status = "okay"; 429}; 430 431#include "tps65910.dtsi" 432 433&tps { 434 vcc1-supply = <&vbat>; 435 vcc2-supply = <&vbat>; 436 vcc3-supply = <&vbat>; 437 vcc4-supply = <&vbat>; 438 vcc5-supply = <&vbat>; 439 vcc6-supply = <&vbat>; 440 vcc7-supply = <&vbat>; 441 vccio-supply = <&vbat>; 442 443 regulators { 444 vrtc_reg: regulator@0 { 445 regulator-name = "ldo_vrtc"; 446 regulator-always-on; 447 }; 448 449 vio_reg: regulator@1 { 450 regulator-name = "buck_vdd_ddr"; 451 regulator-always-on; 452 }; 453 454 vdd1_reg: regulator@2 { 455 /* VDD_MPU voltage limits */ 456 regulator-name = "buck_vdd_mpu"; 457 regulator-min-microvolt = <912500>; 458 regulator-max-microvolt = <1312500>; 459 regulator-boot-on; 460 regulator-always-on; 461 }; 462 463 vdd2_reg: regulator@3 { 464 /* VDD_CORE voltage limits */ 465 regulator-name = "buck_vdd_core"; 466 regulator-min-microvolt = <912500>; 467 regulator-max-microvolt = <1150000>; 468 regulator-boot-on; 469 regulator-always-on; 470 }; 471 472 vdd3_reg: regulator@4 { 473 regulator-name = "boost_res"; 474 regulator-always-on; 475 }; 476 477 vdig1_reg: regulator@5 { 478 regulator-name = "ldo_vdig1"; 479 regulator-always-on; 480 }; 481 482 vdig2_reg: regulator@6 { 483 regulator-name = "ldo_vdig2"; 484 regulator-always-on; 485 }; 486 487 vpll_reg: regulator@7 { 488 regulator-name = "ldo_vpll"; 489 regulator-always-on; 490 }; 491 492 vdac_reg: regulator@8 { 493 regulator-name = "ldo_vdac"; 494 regulator-always-on; 495 }; 496 497 vaux1_reg: regulator@9 { 498 regulator-name = "ldo_vaux1"; 499 regulator-always-on; 500 }; 501 502 vaux2_reg: regulator@10 { 503 regulator-name = "ldo_vaux2"; 504 regulator-always-on; 505 }; 506 507 vaux33_reg: regulator@11 { 508 regulator-name = "ldo_vaux33"; 509 regulator-always-on; 510 }; 511 512 vmmc_reg: regulator@12 { 513 regulator-name = "ldo_vmmc"; 514 regulator-min-microvolt = <1800000>; 515 regulator-max-microvolt = <3300000>; 516 regulator-always-on; 517 }; 518 519 vbb_reg: regulator@13 { 520 regulator-name = "bat_vbb"; 521 }; 522 }; 523}; 524 525&mac { 526 pinctrl-names = "default"; 527 pinctrl-0 = <&cpsw_default>; 528 dual_emac; /* no switch, two distinct MACs */ 529 status = "okay"; 530}; 531 532&davinci_mdio { 533 pinctrl-names = "default"; 534 pinctrl-0 = <&davinci_mdio_default>; 535 status = "okay"; 536}; 537 538&cpsw_emac0 { 539 phy_id = <&davinci_mdio>, <0>; 540 phy-mode = "mii"; 541 dual_emac_res_vlan = <1>; 542}; 543 544&cpsw_emac1 { 545 phy_id = <&davinci_mdio>, <1>; 546 phy-mode = "mii"; 547 dual_emac_res_vlan = <2>; 548}; 549 550&tscadc { 551 status = "okay"; 552 tsc { 553 ti,wires = <4>; 554 ti,x-plate-resistance = <200>; 555 ti,coordinate-readouts = <5>; 556 ti,wire-config = <0x01 0x10 0x22 0x33>; 557 ti,charge-delay = <0x400>; 558 }; 559 560 adc { 561 ti,adc-channels = <4 5 6 7>; 562 }; 563}; 564 565&mmc1 { 566 status = "okay"; 567 vmmc-supply = <&vmmc_reg>; 568 bus-width = <4>; 569 pinctrl-names = "default"; 570 pinctrl-0 = <&mmc1_pins>; 571 non-removable; 572}; 573 574&mmc2 { 575 status = "okay"; 576 vmmc-supply = <&vmmc_reg>; 577 bus-width = <4>; 578 pinctrl-names = "default"; 579 pinctrl-0 = <&mmc2_pins>; 580 cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; 581}; 582 583&sham { 584 status = "okay"; 585}; 586 587&aes { 588 status = "okay"; 589}; 590 591&dcan0 { 592 status = "okay"; 593 pinctrl-names = "default"; 594 pinctrl-0 = <&dcan0_pins>; 595}; 596