1/* 2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9/* 10 * AM335x Starter Kit 11 * http://www.ti.com/tool/tmdssk3358 12 */ 13 14/dts-v1/; 15 16#include "am33xx.dtsi" 17#include <dt-bindings/pwm/pwm.h> 18#include <dt-bindings/interrupt-controller/irq.h> 19 20/ { 21 model = "TI AM335x EVM-SK"; 22 compatible = "ti,am335x-evmsk", "ti,am33xx"; 23 24 chosen { 25 stdout-path = &uart0; 26 tick-timer = &timer2; 27 }; 28 29 cpus { 30 cpu@0 { 31 cpu0-supply = <&vdd1_reg>; 32 }; 33 }; 34 35 memory { 36 device_type = "memory"; 37 reg = <0x80000000 0x10000000>; /* 256 MB */ 38 }; 39 40 vbat: fixedregulator@0 { 41 compatible = "regulator-fixed"; 42 regulator-name = "vbat"; 43 regulator-min-microvolt = <5000000>; 44 regulator-max-microvolt = <5000000>; 45 regulator-boot-on; 46 }; 47 48 lis3_reg: fixedregulator@1 { 49 compatible = "regulator-fixed"; 50 regulator-name = "lis3_reg"; 51 regulator-boot-on; 52 }; 53 54 wl12xx_vmmc: fixedregulator@2 { 55 pinctrl-names = "default"; 56 pinctrl-0 = <&wl12xx_gpio>; 57 compatible = "regulator-fixed"; 58 regulator-name = "vwl1271"; 59 regulator-min-microvolt = <1800000>; 60 regulator-max-microvolt = <1800000>; 61 gpio = <&gpio1 29 0>; 62 startup-delay-us = <70000>; 63 enable-active-high; 64 }; 65 66 vtt_fixed: fixedregulator@3 { 67 compatible = "regulator-fixed"; 68 regulator-name = "vtt"; 69 regulator-min-microvolt = <1500000>; 70 regulator-max-microvolt = <1500000>; 71 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>; 72 regulator-always-on; 73 regulator-boot-on; 74 enable-active-high; 75 }; 76 77 leds { 78 pinctrl-names = "default"; 79 pinctrl-0 = <&user_leds_s0>; 80 81 compatible = "gpio-leds"; 82 83 led@1 { 84 label = "evmsk:green:usr0"; 85 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; 86 default-state = "off"; 87 }; 88 89 led@2 { 90 label = "evmsk:green:usr1"; 91 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; 92 default-state = "off"; 93 }; 94 95 led@3 { 96 label = "evmsk:green:mmc0"; 97 gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; 98 linux,default-trigger = "mmc0"; 99 default-state = "off"; 100 }; 101 102 led@4 { 103 label = "evmsk:green:heartbeat"; 104 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; 105 linux,default-trigger = "heartbeat"; 106 default-state = "off"; 107 }; 108 }; 109 110 gpio_buttons: gpio_buttons@0 { 111 compatible = "gpio-keys"; 112 113 switch@1 { 114 label = "button0"; 115 linux,code = <0x100>; 116 gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; 117 }; 118 119 switch@2 { 120 label = "button1"; 121 linux,code = <0x101>; 122 gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; 123 }; 124 125 switch@3 { 126 label = "button2"; 127 linux,code = <0x102>; 128 gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; 129 wakeup-source; 130 }; 131 132 switch@4 { 133 label = "button3"; 134 linux,code = <0x103>; 135 gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; 136 }; 137 }; 138 139 backlight { 140 compatible = "pwm-backlight"; 141 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>; 142 brightness-levels = <0 58 61 66 75 90 125 170 255>; 143 default-brightness-level = <8>; 144 }; 145 146 sound { 147 compatible = "simple-audio-card"; 148 simple-audio-card,name = "AM335x-EVMSK"; 149 simple-audio-card,widgets = 150 "Headphone", "Headphone Jack"; 151 simple-audio-card,routing = 152 "Headphone Jack", "HPLOUT", 153 "Headphone Jack", "HPROUT"; 154 simple-audio-card,format = "dsp_b"; 155 simple-audio-card,bitclock-master = <&sound_master>; 156 simple-audio-card,frame-master = <&sound_master>; 157 simple-audio-card,bitclock-inversion; 158 159 simple-audio-card,cpu { 160 sound-dai = <&mcasp1>; 161 }; 162 163 sound_master: simple-audio-card,codec { 164 sound-dai = <&tlv320aic3106>; 165 system-clock-frequency = <24000000>; 166 }; 167 }; 168 169 panel { 170 compatible = "ti,tilcdc,panel"; 171 pinctrl-names = "default", "sleep"; 172 pinctrl-0 = <&lcd_pins_default>; 173 pinctrl-1 = <&lcd_pins_sleep>; 174 status = "okay"; 175 panel-info { 176 ac-bias = <255>; 177 ac-bias-intrpt = <0>; 178 dma-burst-sz = <16>; 179 bpp = <32>; 180 fdd = <0x80>; 181 sync-edge = <0>; 182 sync-ctrl = <1>; 183 raster-order = <0>; 184 fifo-th = <0>; 185 }; 186 display-timings { 187 480x272 { 188 hactive = <480>; 189 vactive = <272>; 190 hback-porch = <43>; 191 hfront-porch = <8>; 192 hsync-len = <4>; 193 vback-porch = <12>; 194 vfront-porch = <4>; 195 vsync-len = <10>; 196 clock-frequency = <9000000>; 197 hsync-active = <0>; 198 vsync-active = <0>; 199 }; 200 }; 201 }; 202}; 203 204&am33xx_pinmux { 205 pinctrl-names = "default"; 206 pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; 207 208 lcd_pins_default: lcd_pins_default { 209 pinctrl-single,pins = < 210 AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ 211 AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ 212 AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ 213 AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ 214 AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ 215 AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ 216 AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ 217 AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ 218 AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ 219 AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ 220 AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ 221 AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ 222 AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ 223 AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ 224 AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ 225 AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ 226 AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ 227 AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ 228 AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ 229 AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ 230 AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ 231 AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ 232 AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ 233 AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ 234 AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ 235 AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ 236 AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ 237 AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ 238 >; 239 }; 240 241 lcd_pins_sleep: lcd_pins_sleep { 242 pinctrl-single,pins = < 243 AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */ 244 AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */ 245 AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */ 246 AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */ 247 AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */ 248 AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */ 249 AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */ 250 AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */ 251 AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ 252 AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ 253 AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ 254 AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ 255 AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ 256 AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ 257 AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ 258 AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ 259 AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ 260 AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ 261 AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ 262 AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ 263 AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ 264 AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ 265 AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ 266 AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ 267 AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */ 268 AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ 269 AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ 270 AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */ 271 >; 272 }; 273 274 275 user_leds_s0: user_leds_s0 { 276 pinctrl-single,pins = < 277 AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ 278 AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ 279 AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ 280 AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ 281 >; 282 }; 283 284 gpio_keys_s0: gpio_keys_s0 { 285 pinctrl-single,pins = < 286 AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ 287 AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ 288 AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ 289 AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ 290 >; 291 }; 292 293 i2c0_pins: pinmux_i2c0_pins { 294 pinctrl-single,pins = < 295 AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 296 AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 297 >; 298 }; 299 300 uart0_pins: pinmux_uart0_pins { 301 pinctrl-single,pins = < 302 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 303 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ 304 >; 305 }; 306 307 clkout2_pin: pinmux_clkout2_pin { 308 pinctrl-single,pins = < 309 AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ 310 >; 311 }; 312 313 ecap2_pins: backlight_pins { 314 pinctrl-single,pins = < 315 AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */ 316 >; 317 }; 318 319 cpsw_default: cpsw_default { 320 pinctrl-single,pins = < 321 /* Slave 1 */ 322 AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ 323 AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ 324 AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ 325 AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ 326 AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ 327 AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ 328 AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ 329 AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ 330 AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ 331 AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ 332 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ 333 AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ 334 335 /* Slave 2 */ 336 AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ 337 AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ 338 AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ 339 AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ 340 AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ 341 AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ 342 AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ 343 AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ 344 AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ 345 AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ 346 AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ 347 AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ 348 >; 349 }; 350 351 cpsw_sleep: cpsw_sleep { 352 pinctrl-single,pins = < 353 /* Slave 1 reset value */ 354 AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) 355 AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) 356 AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) 357 AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) 358 AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) 359 AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) 360 AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) 361 AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) 362 AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) 363 AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) 364 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) 365 AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) 366 367 /* Slave 2 reset value*/ 368 AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) 369 AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) 370 AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) 371 AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) 372 AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) 373 AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) 374 AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) 375 AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) 376 AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) 377 AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) 378 AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) 379 AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) 380 >; 381 }; 382 383 davinci_mdio_default: davinci_mdio_default { 384 pinctrl-single,pins = < 385 /* MDIO */ 386 AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 387 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 388 >; 389 }; 390 391 davinci_mdio_sleep: davinci_mdio_sleep { 392 pinctrl-single,pins = < 393 /* MDIO reset value */ 394 AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) 395 AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) 396 >; 397 }; 398 399 mmc1_pins: pinmux_mmc1_pins { 400 pinctrl-single,pins = < 401 AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 402 >; 403 }; 404 405 mcasp1_pins: mcasp1_pins { 406 pinctrl-single,pins = < 407 AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ 408 AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 409 AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 410 AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ 411 >; 412 }; 413 414 mcasp1_pins_sleep: mcasp1_pins_sleep { 415 pinctrl-single,pins = < 416 AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) 417 AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) 418 AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) 419 AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) 420 >; 421 }; 422 423 mmc2_pins: pinmux_mmc2_pins { 424 pinctrl-single,pins = < 425 AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ 426 AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ 427 AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ 428 AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ 429 AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ 430 AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ 431 AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ 432 >; 433 }; 434 435 wl12xx_gpio: pinmux_wl12xx_gpio { 436 pinctrl-single,pins = < 437 AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */ 438 >; 439 }; 440}; 441 442&uart0 { 443 pinctrl-names = "default"; 444 pinctrl-0 = <&uart0_pins>; 445 446 status = "okay"; 447}; 448 449&i2c0 { 450 pinctrl-names = "default"; 451 pinctrl-0 = <&i2c0_pins>; 452 453 status = "okay"; 454 clock-frequency = <400000>; 455 456 tps: tps@2d { 457 reg = <0x2d>; 458 }; 459 460 lis331dlh: lis331dlh@18 { 461 compatible = "st,lis331dlh", "st,lis3lv02d"; 462 reg = <0x18>; 463 Vdd-supply = <&lis3_reg>; 464 Vdd_IO-supply = <&lis3_reg>; 465 466 st,click-single-x; 467 st,click-single-y; 468 st,click-single-z; 469 st,click-thresh-x = <10>; 470 st,click-thresh-y = <10>; 471 st,click-thresh-z = <10>; 472 st,irq1-click; 473 st,irq2-click; 474 st,wakeup-x-lo; 475 st,wakeup-x-hi; 476 st,wakeup-y-lo; 477 st,wakeup-y-hi; 478 st,wakeup-z-lo; 479 st,wakeup-z-hi; 480 st,min-limit-x = <120>; 481 st,min-limit-y = <120>; 482 st,min-limit-z = <140>; 483 st,max-limit-x = <550>; 484 st,max-limit-y = <550>; 485 st,max-limit-z = <750>; 486 }; 487 488 tlv320aic3106: tlv320aic3106@1b { 489 #sound-dai-cells = <0>; 490 compatible = "ti,tlv320aic3106"; 491 reg = <0x1b>; 492 status = "okay"; 493 494 /* Regulators */ 495 AVDD-supply = <&vaux2_reg>; 496 IOVDD-supply = <&vaux2_reg>; 497 DRVDD-supply = <&vaux2_reg>; 498 DVDD-supply = <&vbat>; 499 }; 500}; 501 502&usb { 503 status = "okay"; 504}; 505 506&usb_ctrl_mod { 507 status = "okay"; 508}; 509 510&usb0_phy { 511 status = "okay"; 512}; 513 514&usb1_phy { 515 status = "okay"; 516}; 517 518&usb0 { 519 status = "okay"; 520}; 521 522&usb1 { 523 status = "okay"; 524 dr_mode = "host"; 525}; 526 527&cppi41dma { 528 status = "okay"; 529}; 530 531&epwmss2 { 532 status = "okay"; 533 534 ecap2: ecap@48304100 { 535 status = "okay"; 536 pinctrl-names = "default"; 537 pinctrl-0 = <&ecap2_pins>; 538 }; 539}; 540 541#include "tps65910.dtsi" 542 543&tps { 544 vcc1-supply = <&vbat>; 545 vcc2-supply = <&vbat>; 546 vcc3-supply = <&vbat>; 547 vcc4-supply = <&vbat>; 548 vcc5-supply = <&vbat>; 549 vcc6-supply = <&vbat>; 550 vcc7-supply = <&vbat>; 551 vccio-supply = <&vbat>; 552 553 regulators { 554 vrtc_reg: regulator@0 { 555 regulator-always-on; 556 }; 557 558 vio_reg: regulator@1 { 559 regulator-always-on; 560 }; 561 562 vdd1_reg: regulator@2 { 563 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ 564 regulator-name = "vdd_mpu"; 565 regulator-min-microvolt = <912500>; 566 regulator-max-microvolt = <1312500>; 567 regulator-boot-on; 568 regulator-always-on; 569 }; 570 571 vdd2_reg: regulator@3 { 572 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ 573 regulator-name = "vdd_core"; 574 regulator-min-microvolt = <912500>; 575 regulator-max-microvolt = <1150000>; 576 regulator-boot-on; 577 regulator-always-on; 578 }; 579 580 vdd3_reg: regulator@4 { 581 regulator-always-on; 582 }; 583 584 vdig1_reg: regulator@5 { 585 regulator-always-on; 586 }; 587 588 vdig2_reg: regulator@6 { 589 regulator-always-on; 590 }; 591 592 vpll_reg: regulator@7 { 593 regulator-always-on; 594 }; 595 596 vdac_reg: regulator@8 { 597 regulator-always-on; 598 }; 599 600 vaux1_reg: regulator@9 { 601 regulator-always-on; 602 }; 603 604 vaux2_reg: regulator@10 { 605 regulator-always-on; 606 }; 607 608 vaux33_reg: regulator@11 { 609 regulator-always-on; 610 }; 611 612 vmmc_reg: regulator@12 { 613 regulator-min-microvolt = <1800000>; 614 regulator-max-microvolt = <3300000>; 615 regulator-always-on; 616 }; 617 }; 618}; 619 620&mac { 621 pinctrl-names = "default", "sleep"; 622 pinctrl-0 = <&cpsw_default>; 623 pinctrl-1 = <&cpsw_sleep>; 624 dual_emac = <1>; 625 status = "okay"; 626}; 627 628&davinci_mdio { 629 pinctrl-names = "default", "sleep"; 630 pinctrl-0 = <&davinci_mdio_default>; 631 pinctrl-1 = <&davinci_mdio_sleep>; 632 status = "okay"; 633}; 634 635&cpsw_emac0 { 636 phy_id = <&davinci_mdio>, <0>; 637 phy-mode = "rgmii-txid"; 638 dual_emac_res_vlan = <1>; 639}; 640 641&cpsw_emac1 { 642 phy_id = <&davinci_mdio>, <1>; 643 phy-mode = "rgmii-txid"; 644 dual_emac_res_vlan = <2>; 645}; 646 647&mmc1 { 648 status = "okay"; 649 vmmc-supply = <&vmmc_reg>; 650 bus-width = <4>; 651 pinctrl-names = "default"; 652 pinctrl-0 = <&mmc1_pins>; 653 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 654}; 655 656&sham { 657 status = "okay"; 658}; 659 660&aes { 661 status = "okay"; 662}; 663 664&gpio0 { 665 ti,no-reset-on-init; 666}; 667 668&mmc2 { 669 status = "okay"; 670 vmmc-supply = <&wl12xx_vmmc>; 671 ti,non-removable; 672 bus-width = <4>; 673 cap-power-off-card; 674 pinctrl-names = "default"; 675 pinctrl-0 = <&mmc2_pins>; 676 677 #address-cells = <1>; 678 #size-cells = <0>; 679 wlcore: wlcore@2 { 680 compatible = "ti,wl1271"; 681 reg = <2>; 682 interrupt-parent = <&gpio0>; 683 interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ 684 ref-clock-frequency = <38400000>; 685 }; 686}; 687 688&mcasp1 { 689 #sound-dai-cells = <0>; 690 pinctrl-names = "default", "sleep"; 691 pinctrl-0 = <&mcasp1_pins>; 692 pinctrl-1 = <&mcasp1_pins_sleep>; 693 694 status = "okay"; 695 696 op-mode = <0>; /* MCASP_IIS_MODE */ 697 tdm-slots = <2>; 698 /* 4 serializers */ 699 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 700 0 0 1 2 701 >; 702 tx-num-evt = <32>; 703 rx-num-evt = <32>; 704}; 705 706&tscadc { 707 status = "okay"; 708 tsc { 709 ti,wires = <4>; 710 ti,x-plate-resistance = <200>; 711 ti,coordinate-readouts = <5>; 712 ti,wire-config = <0x00 0x11 0x22 0x33>; 713 }; 714}; 715 716&lcdc { 717 status = "okay"; 718}; 719