1/* 2 * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ 3 * Author: Rostislav Lisovy <lisovy@jablotron.cz> 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License version 2 as 7 * published by the Free Software Foundation. 8 */ 9/dts-v1/; 10#include "am335x-chilisom.dtsi" 11 12/ { 13 model = "AM335x Chiliboard"; 14 compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", 15 "ti,am33xx"; 16 17 leds { 18 compatible = "gpio-leds"; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&led_gpio_pins>; 21 22 led0 { 23 label = "led0"; 24 gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; 25 default-state = "keep"; 26 linux,default-trigger = "heartbeat"; 27 }; 28 29 led1 { 30 label = "led1"; 31 gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; 32 default-state = "keep"; 33 }; 34 }; 35}; 36 37&am33xx_pinmux { 38 uart0_pins: pinmux_uart0_pins { 39 pinctrl-single,pins = < 40 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 41 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ 42 >; 43 }; 44 45 cpsw_default: cpsw_default { 46 pinctrl-single,pins = < 47 /* Slave 1 */ 48 AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ 49 AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ 50 AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ 51 AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ 52 AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ 53 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ 54 AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ 55 AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ 56 >; 57 }; 58 59 cpsw_sleep: cpsw_sleep { 60 pinctrl-single,pins = < 61 /* Slave 1 reset value */ 62 AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) 63 AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) 64 AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) 65 AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) 66 AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) 67 AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) 68 AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) 69 AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) 70 AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) 71 >; 72 }; 73 74 davinci_mdio_default: davinci_mdio_default { 75 pinctrl-single,pins = < 76 /* mdio_data.mdio_data */ 77 AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) 78 /* mdio_clk.mdio_clk */ 79 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) 80 >; 81 }; 82 83 davinci_mdio_sleep: davinci_mdio_sleep { 84 pinctrl-single,pins = < 85 /* MDIO reset value */ 86 AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) 87 AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) 88 >; 89 }; 90 91 usb1_drvvbus: usb1_drvvbus { 92 pinctrl-single,pins = < 93 AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ 94 >; 95 }; 96 97 sd_pins: pinmux_sd_card { 98 pinctrl-single,pins = < 99 AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ 100 AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ 101 AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ 102 AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ 103 AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ 104 AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ 105 AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 106 >; 107 }; 108 109 led_gpio_pins: led_gpio_pins { 110 pinctrl-single,pins = < 111 AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ 112 AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ 113 >; 114 }; 115}; 116 117&uart0 { 118 pinctrl-names = "default"; 119 pinctrl-0 = <&uart0_pins>; 120 121 status = "okay"; 122}; 123 124&ldo4_reg { 125 regulator-min-microvolt = <3300000>; 126 regulator-max-microvolt = <3300000>; 127}; 128 129/* Ethernet */ 130&mac { 131 slaves = <1>; 132 pinctrl-names = "default", "sleep"; 133 pinctrl-0 = <&cpsw_default>; 134 pinctrl-1 = <&cpsw_sleep>; 135 status = "okay"; 136}; 137 138&davinci_mdio { 139 pinctrl-names = "default", "sleep"; 140 pinctrl-0 = <&davinci_mdio_default>; 141 pinctrl-1 = <&davinci_mdio_sleep>; 142 status = "okay"; 143}; 144 145&cpsw_emac0 { 146 phy_id = <&davinci_mdio>, <0>; 147 phy-mode = "rmii"; 148}; 149 150&phy_sel { 151 rmii-clock-ext; 152}; 153 154/* USB */ 155&usb { 156 status = "okay"; 157}; 158 159&usb_ctrl_mod { 160 status = "okay"; 161}; 162 163&usb1_phy { 164 status = "okay"; 165}; 166 167&usb1 { 168 pinctrl-names = "default"; 169 pinctrl-0 = <&usb1_drvvbus>; 170 171 status = "okay"; 172 dr_mode = "host"; 173}; 174 175&cppi41dma { 176 status = "okay"; 177}; 178 179/* microSD */ 180&mmc1 { 181 pinctrl-names = "default"; 182 pinctrl-0 = <&sd_pins>; 183 vmmc-supply = <&ldo4_reg>; 184 bus-width = <0x4>; 185 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; 186 status = "okay"; 187}; 188 189&tps { 190 interrupt-parent = <&intc>; 191 interrupts = <7>; /* NNMI */ 192 193 charger { 194 status = "okay"; 195 }; 196 197 pwrbutton { 198 status = "okay"; 199 }; 200}; 201