1/* 2 * armboot - Startup Code for SA1100 CPU 3 * 4 * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> 5 * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> 6 * Copyright (C) 2000 Wolfgang Denk <wd@denx.de> 7 * Copyright (c) 2001 Alex Züpke <azu@sysgo.de> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12#include <asm-offsets.h> 13#include <config.h> 14 15/* 16 ************************************************************************* 17 * 18 * Startup Code (reset vector) 19 * 20 * do important init only if we don't start from memory! 21 * relocate armboot to ram 22 * setup stack 23 * jump to second stage 24 * 25 ************************************************************************* 26 */ 27 28 .globl reset 29 30reset: 31 /* 32 * set the cpu to SVC32 mode 33 */ 34 mrs r0,cpsr 35 bic r0,r0,#0x1f 36 orr r0,r0,#0xd3 37 msr cpsr,r0 38 39 /* 40 * we do sys-critical inits only at reboot, 41 * not when booting from ram! 42 */ 43#ifndef CONFIG_SKIP_LOWLEVEL_INIT 44 bl cpu_init_crit 45#endif 46 47 bl _main 48 49/*------------------------------------------------------------------------------*/ 50 51 .globl c_runtime_cpu_setup 52c_runtime_cpu_setup: 53 54 mov pc, lr 55 56/* 57 ************************************************************************* 58 * 59 * CPU_init_critical registers 60 * 61 * setup important registers 62 * setup memory timing 63 * 64 ************************************************************************* 65 */ 66 67 68/* Interrupt-Controller base address */ 69IC_BASE: .word 0x90050000 70#define ICMR 0x04 71 72 73/* Reset-Controller */ 74RST_BASE: .word 0x90030000 75#define RSRR 0x00 76#define RCSR 0x04 77 78 79/* PWR */ 80PWR_BASE: .word 0x90020000 81#define PSPR 0x08 82#define PPCR 0x14 83cpuspeed: .word CONFIG_SYS_CPUSPEED 84 85 86cpu_init_crit: 87 /* 88 * mask all IRQs 89 */ 90 ldr r0, IC_BASE 91 mov r1, #0x00 92 str r1, [r0, #ICMR] 93 94 /* set clock speed */ 95 ldr r0, PWR_BASE 96 ldr r1, cpuspeed 97 str r1, [r0, #PPCR] 98 99 /* 100 * before relocating, we have to setup RAM timing 101 * because memory timing is board-dependend, you will 102 * find a lowlevel_init.S in your board directory. 103 */ 104 mov ip, lr 105 bl lowlevel_init 106 mov lr, ip 107 108 /* 109 * disable MMU stuff and enable I-cache 110 */ 111 mrc p15,0,r0,c1,c0 112 bic r0, r0, #0x00002000 @ clear bit 13 (X) 113 bic r0, r0, #0x0000000f @ clear bits 3-0 (WCAM) 114 orr r0, r0, #0x00001000 @ set bit 12 (I) Icache 115 orr r0, r0, #0x00000002 @ set bit 2 (A) Align 116 mcr p15,0,r0,c1,c0 117 118 /* 119 * flush v4 I/D caches 120 */ 121 mov r0, #0 122 mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ 123 mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ 124 125 mov pc, lr 126