xref: /openbmc/u-boot/arch/arm/cpu/pxa/pxa2xx.c (revision ec379132)
1 /*
2  * (C) Copyright 2002
3  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4  * Marius Groeger <mgroeger@sysgo.de>
5  *
6  * (C) Copyright 2002
7  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
8  * Alex Zuepke <azu@sysgo.de>
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 
13 #include <common.h>
14 #include <asm/arch/pxa-regs.h>
15 #include <asm/io.h>
16 #include <asm/system.h>
17 #include <command.h>
18 
19 /* Flush I/D-cache */
20 static void cache_flush(void)
21 {
22 	unsigned long i = 0;
23 
24 	asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i));
25 }
26 
27 int cleanup_before_linux(void)
28 {
29 	/*
30 	 * This function is called just before we call Linux. It prepares
31 	 * the processor for Linux by just disabling everything that can
32 	 * disturb booting Linux.
33 	 */
34 
35 	disable_interrupts();
36 	icache_disable();
37 	dcache_disable();
38 	cache_flush();
39 
40 	return 0;
41 }
42 
43 void pxa_wait_ticks(int ticks)
44 {
45 	writel(0, OSCR);
46 	while (readl(OSCR) < ticks)
47 		asm volatile("" : : : "memory");
48 }
49 
50 inline void writelrb(uint32_t val, uint32_t addr)
51 {
52 	writel(val, addr);
53 	asm volatile("" : : : "memory");
54 	readl(addr);
55 	asm volatile("" : : : "memory");
56 }
57 
58 void pxa2xx_dram_init(void)
59 {
60 	uint32_t tmp;
61 	int i;
62 	/*
63 	 * 1) Initialize Asynchronous static memory controller
64 	 */
65 
66 	writelrb(CONFIG_SYS_MSC0_VAL, MSC0);
67 	writelrb(CONFIG_SYS_MSC1_VAL, MSC1);
68 	writelrb(CONFIG_SYS_MSC2_VAL, MSC2);
69 	/*
70 	 * 2) Initialize Card Interface
71 	 */
72 
73 	/* MECR: Memory Expansion Card Register */
74 	writelrb(CONFIG_SYS_MECR_VAL, MECR);
75 	/* MCMEM0: Card Interface slot 0 timing */
76 	writelrb(CONFIG_SYS_MCMEM0_VAL, MCMEM0);
77 	/* MCMEM1: Card Interface slot 1 timing */
78 	writelrb(CONFIG_SYS_MCMEM1_VAL, MCMEM1);
79 	/* MCATT0: Card Interface Attribute Space Timing, slot 0 */
80 	writelrb(CONFIG_SYS_MCATT0_VAL, MCATT0);
81 	/* MCATT1: Card Interface Attribute Space Timing, slot 1 */
82 	writelrb(CONFIG_SYS_MCATT1_VAL, MCATT1);
83 	/* MCIO0: Card Interface I/O Space Timing, slot 0 */
84 	writelrb(CONFIG_SYS_MCIO0_VAL, MCIO0);
85 	/* MCIO1: Card Interface I/O Space Timing, slot 1 */
86 	writelrb(CONFIG_SYS_MCIO1_VAL, MCIO1);
87 
88 	/*
89 	 * 3) Configure Fly-By DMA register
90 	 */
91 
92 	writelrb(CONFIG_SYS_FLYCNFG_VAL, FLYCNFG);
93 
94 	/*
95 	 * 4) Initialize Timing for Sync Memory (SDCLK0)
96 	 */
97 
98 	/*
99 	 * Before accessing MDREFR we need a valid DRI field, so we set
100 	 * this to power on defaults + DRI field.
101 	 */
102 
103 	/* Read current MDREFR config and zero out DRI */
104 	tmp = readl(MDREFR) & ~0xfff;
105 	/* Add user-specified DRI */
106 	tmp |= CONFIG_SYS_MDREFR_VAL & 0xfff;
107 	/* Configure important bits */
108 	tmp |= MDREFR_K0RUN | MDREFR_SLFRSH;
109 	tmp &= ~(MDREFR_APD | MDREFR_E1PIN);
110 
111 	/* Write MDREFR back */
112 	writelrb(tmp, MDREFR);
113 
114 	/*
115 	 * 5) Initialize Synchronous Static Memory (Flash/Peripherals)
116 	 */
117 
118 	/* Initialize SXCNFG register. Assert the enable bits.
119 	 *
120 	 * Write SXMRS to cause an MRS command to all enabled banks of
121 	 * synchronous static memory. Note that SXLCR need not be written
122 	 * at this time.
123 	 */
124 	writelrb(CONFIG_SYS_SXCNFG_VAL, SXCNFG);
125 
126 	/*
127 	 * 6) Initialize SDRAM
128 	 */
129 
130 	writelrb(CONFIG_SYS_MDREFR_VAL & ~MDREFR_SLFRSH, MDREFR);
131 	writelrb(CONFIG_SYS_MDREFR_VAL | MDREFR_E1PIN, MDREFR);
132 
133 	/*
134 	 * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure
135 	 *    but not enable each SDRAM partition pair.
136 	 */
137 
138 	writelrb(CONFIG_SYS_MDCNFG_VAL &
139 		~(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3), MDCNFG);
140 	/* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */
141 	pxa_wait_ticks(0x300);
142 
143 	/*
144 	 * 8) Trigger a number (usually 8) refresh cycles by attempting
145 	 *    non-burst read or write accesses to disabled SDRAM, as commonly
146 	 *    specified in the power up sequence documented in SDRAM data
147 	 *    sheets. The address(es) used for this purpose must not be
148 	 *    cacheable.
149 	 */
150 	for (i = 9; i >= 0; i--) {
151 		writel(i, 0xa0000000);
152 		asm volatile("" : : : "memory");
153 	}
154 	/*
155 	 * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1).
156 	 */
157 
158 	tmp = CONFIG_SYS_MDCNFG_VAL &
159 		(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3);
160 	tmp |= readl(MDCNFG);
161 	writelrb(tmp, MDCNFG);
162 
163 	/*
164 	 * 10) Write MDMRS.
165 	 */
166 
167 	writelrb(CONFIG_SYS_MDMRS_VAL, MDMRS);
168 
169 	/*
170 	 * 11) Enable APD
171 	 */
172 
173 	if (CONFIG_SYS_MDREFR_VAL & MDREFR_APD) {
174 		tmp = readl(MDREFR);
175 		tmp |= MDREFR_APD;
176 		writelrb(tmp, MDREFR);
177 	}
178 }
179 
180 void pxa_gpio_setup(void)
181 {
182 	writel(CONFIG_SYS_GPSR0_VAL, GPSR0);
183 	writel(CONFIG_SYS_GPSR1_VAL, GPSR1);
184 	writel(CONFIG_SYS_GPSR2_VAL, GPSR2);
185 #if defined(CONFIG_CPU_PXA27X)
186 	writel(CONFIG_SYS_GPSR3_VAL, GPSR3);
187 #endif
188 
189 	writel(CONFIG_SYS_GPCR0_VAL, GPCR0);
190 	writel(CONFIG_SYS_GPCR1_VAL, GPCR1);
191 	writel(CONFIG_SYS_GPCR2_VAL, GPCR2);
192 #if defined(CONFIG_CPU_PXA27X)
193 	writel(CONFIG_SYS_GPCR3_VAL, GPCR3);
194 #endif
195 
196 	writel(CONFIG_SYS_GPDR0_VAL, GPDR0);
197 	writel(CONFIG_SYS_GPDR1_VAL, GPDR1);
198 	writel(CONFIG_SYS_GPDR2_VAL, GPDR2);
199 #if defined(CONFIG_CPU_PXA27X)
200 	writel(CONFIG_SYS_GPDR3_VAL, GPDR3);
201 #endif
202 
203 	writel(CONFIG_SYS_GAFR0_L_VAL, GAFR0_L);
204 	writel(CONFIG_SYS_GAFR0_U_VAL, GAFR0_U);
205 	writel(CONFIG_SYS_GAFR1_L_VAL, GAFR1_L);
206 	writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U);
207 	writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L);
208 	writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U);
209 #if defined(CONFIG_CPU_PXA27X)
210 	writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L);
211 	writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U);
212 #endif
213 
214 	writel(CONFIG_SYS_PSSR_VAL, PSSR);
215 }
216 
217 void pxa_interrupt_setup(void)
218 {
219 	writel(0, ICLR);
220 	writel(0, ICMR);
221 #if defined(CONFIG_CPU_PXA27X)
222 	writel(0, ICLR2);
223 	writel(0, ICMR2);
224 #endif
225 }
226 
227 void pxa_clock_setup(void)
228 {
229 	writel(CONFIG_SYS_CKEN, CKEN);
230 	writel(CONFIG_SYS_CCCR, CCCR);
231 	asm volatile("mcr	p14, 0, %0, c6, c0, 0" : : "r"(0x0b));
232 
233 	/* enable the 32Khz oscillator for RTC and PowerManager */
234 	writel(OSCC_OON, OSCC);
235 	while (!(readl(OSCC) & OSCC_OOK))
236 		asm volatile("" : : : "memory");
237 }
238 
239 void pxa_wakeup(void)
240 {
241 	uint32_t rcsr;
242 
243 	rcsr = readl(RCSR);
244 	writel(rcsr & (RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR), RCSR);
245 
246 	/* Wakeup */
247 	if (rcsr & RCSR_SMR) {
248 		writel(PSSR_PH, PSSR);
249 		pxa2xx_dram_init();
250 		icache_disable();
251 		dcache_disable();
252 		asm volatile("mov	pc, %0" : : "r"(readl(PSPR)));
253 	}
254 }
255 
256 int arch_cpu_init(void)
257 {
258 	pxa_gpio_setup();
259 	pxa_wakeup();
260 	pxa_interrupt_setup();
261 	pxa_clock_setup();
262 	return 0;
263 }
264 
265 void i2c_clk_enable(void)
266 {
267 	/* Set the global I2C clock on */
268 	writel(readl(CKEN) | CKEN14_I2C, CKEN);
269 }
270 
271 void __attribute__((weak)) reset_cpu(ulong ignored) __attribute__((noreturn));
272 
273 void reset_cpu(ulong ignored)
274 {
275 	uint32_t tmp;
276 
277 	setbits_le32(OWER, OWER_WME);
278 
279 	tmp = readl(OSCR);
280 	tmp += 0x1000;
281 	writel(tmp, OSMR3);
282 	writel(MDREFR_SLFRSH, MDREFR);
283 
284 	for (;;)
285 		;
286 }
287 
288 void enable_caches(void)
289 {
290 #ifndef CONFIG_SYS_ICACHE_OFF
291 	icache_enable();
292 #endif
293 #ifndef CONFIG_SYS_DCACHE_OFF
294 	dcache_enable();
295 #endif
296 }
297