1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2002 4 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 5 * Marius Groeger <mgroeger@sysgo.de> 6 * 7 * (C) Copyright 2002 8 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> 9 * Alex Zuepke <azu@sysgo.de> 10 */ 11 12 #include <common.h> 13 #include <asm/arch/pxa-regs.h> 14 #include <asm/io.h> 15 #include <asm/system.h> 16 #include <command.h> 17 18 /* Flush I/D-cache */ 19 static void cache_flush(void) 20 { 21 unsigned long i = 0; 22 23 asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i)); 24 } 25 26 int cleanup_before_linux(void) 27 { 28 /* 29 * This function is called just before we call Linux. It prepares 30 * the processor for Linux by just disabling everything that can 31 * disturb booting Linux. 32 */ 33 34 disable_interrupts(); 35 icache_disable(); 36 dcache_disable(); 37 cache_flush(); 38 39 return 0; 40 } 41 42 void pxa_wait_ticks(int ticks) 43 { 44 writel(0, OSCR); 45 while (readl(OSCR) < ticks) 46 asm volatile("" : : : "memory"); 47 } 48 49 inline void writelrb(uint32_t val, uint32_t addr) 50 { 51 writel(val, addr); 52 asm volatile("" : : : "memory"); 53 readl(addr); 54 asm volatile("" : : : "memory"); 55 } 56 57 void pxa2xx_dram_init(void) 58 { 59 uint32_t tmp; 60 int i; 61 /* 62 * 1) Initialize Asynchronous static memory controller 63 */ 64 65 writelrb(CONFIG_SYS_MSC0_VAL, MSC0); 66 writelrb(CONFIG_SYS_MSC1_VAL, MSC1); 67 writelrb(CONFIG_SYS_MSC2_VAL, MSC2); 68 /* 69 * 2) Initialize Card Interface 70 */ 71 72 /* MECR: Memory Expansion Card Register */ 73 writelrb(CONFIG_SYS_MECR_VAL, MECR); 74 /* MCMEM0: Card Interface slot 0 timing */ 75 writelrb(CONFIG_SYS_MCMEM0_VAL, MCMEM0); 76 /* MCMEM1: Card Interface slot 1 timing */ 77 writelrb(CONFIG_SYS_MCMEM1_VAL, MCMEM1); 78 /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ 79 writelrb(CONFIG_SYS_MCATT0_VAL, MCATT0); 80 /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ 81 writelrb(CONFIG_SYS_MCATT1_VAL, MCATT1); 82 /* MCIO0: Card Interface I/O Space Timing, slot 0 */ 83 writelrb(CONFIG_SYS_MCIO0_VAL, MCIO0); 84 /* MCIO1: Card Interface I/O Space Timing, slot 1 */ 85 writelrb(CONFIG_SYS_MCIO1_VAL, MCIO1); 86 87 /* 88 * 3) Configure Fly-By DMA register 89 */ 90 91 writelrb(CONFIG_SYS_FLYCNFG_VAL, FLYCNFG); 92 93 /* 94 * 4) Initialize Timing for Sync Memory (SDCLK0) 95 */ 96 97 /* 98 * Before accessing MDREFR we need a valid DRI field, so we set 99 * this to power on defaults + DRI field. 100 */ 101 102 /* Read current MDREFR config and zero out DRI */ 103 tmp = readl(MDREFR) & ~0xfff; 104 /* Add user-specified DRI */ 105 tmp |= CONFIG_SYS_MDREFR_VAL & 0xfff; 106 /* Configure important bits */ 107 tmp |= MDREFR_K0RUN | MDREFR_SLFRSH; 108 tmp &= ~(MDREFR_APD | MDREFR_E1PIN); 109 110 /* Write MDREFR back */ 111 writelrb(tmp, MDREFR); 112 113 /* 114 * 5) Initialize Synchronous Static Memory (Flash/Peripherals) 115 */ 116 117 /* Initialize SXCNFG register. Assert the enable bits. 118 * 119 * Write SXMRS to cause an MRS command to all enabled banks of 120 * synchronous static memory. Note that SXLCR need not be written 121 * at this time. 122 */ 123 writelrb(CONFIG_SYS_SXCNFG_VAL, SXCNFG); 124 125 /* 126 * 6) Initialize SDRAM 127 */ 128 129 writelrb(CONFIG_SYS_MDREFR_VAL & ~MDREFR_SLFRSH, MDREFR); 130 writelrb(CONFIG_SYS_MDREFR_VAL | MDREFR_E1PIN, MDREFR); 131 132 /* 133 * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure 134 * but not enable each SDRAM partition pair. 135 */ 136 137 writelrb(CONFIG_SYS_MDCNFG_VAL & 138 ~(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3), MDCNFG); 139 /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ 140 pxa_wait_ticks(0x300); 141 142 /* 143 * 8) Trigger a number (usually 8) refresh cycles by attempting 144 * non-burst read or write accesses to disabled SDRAM, as commonly 145 * specified in the power up sequence documented in SDRAM data 146 * sheets. The address(es) used for this purpose must not be 147 * cacheable. 148 */ 149 for (i = 9; i >= 0; i--) { 150 writel(i, 0xa0000000); 151 asm volatile("" : : : "memory"); 152 } 153 /* 154 * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). 155 */ 156 157 tmp = CONFIG_SYS_MDCNFG_VAL & 158 (MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3); 159 tmp |= readl(MDCNFG); 160 writelrb(tmp, MDCNFG); 161 162 /* 163 * 10) Write MDMRS. 164 */ 165 166 writelrb(CONFIG_SYS_MDMRS_VAL, MDMRS); 167 168 /* 169 * 11) Enable APD 170 */ 171 172 if (CONFIG_SYS_MDREFR_VAL & MDREFR_APD) { 173 tmp = readl(MDREFR); 174 tmp |= MDREFR_APD; 175 writelrb(tmp, MDREFR); 176 } 177 } 178 179 void pxa_gpio_setup(void) 180 { 181 writel(CONFIG_SYS_GPSR0_VAL, GPSR0); 182 writel(CONFIG_SYS_GPSR1_VAL, GPSR1); 183 writel(CONFIG_SYS_GPSR2_VAL, GPSR2); 184 #if defined(CONFIG_CPU_PXA27X) 185 writel(CONFIG_SYS_GPSR3_VAL, GPSR3); 186 #endif 187 188 writel(CONFIG_SYS_GPCR0_VAL, GPCR0); 189 writel(CONFIG_SYS_GPCR1_VAL, GPCR1); 190 writel(CONFIG_SYS_GPCR2_VAL, GPCR2); 191 #if defined(CONFIG_CPU_PXA27X) 192 writel(CONFIG_SYS_GPCR3_VAL, GPCR3); 193 #endif 194 195 writel(CONFIG_SYS_GPDR0_VAL, GPDR0); 196 writel(CONFIG_SYS_GPDR1_VAL, GPDR1); 197 writel(CONFIG_SYS_GPDR2_VAL, GPDR2); 198 #if defined(CONFIG_CPU_PXA27X) 199 writel(CONFIG_SYS_GPDR3_VAL, GPDR3); 200 #endif 201 202 writel(CONFIG_SYS_GAFR0_L_VAL, GAFR0_L); 203 writel(CONFIG_SYS_GAFR0_U_VAL, GAFR0_U); 204 writel(CONFIG_SYS_GAFR1_L_VAL, GAFR1_L); 205 writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U); 206 writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L); 207 writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U); 208 #if defined(CONFIG_CPU_PXA27X) 209 writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L); 210 writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U); 211 #endif 212 213 writel(CONFIG_SYS_PSSR_VAL, PSSR); 214 } 215 216 void pxa_interrupt_setup(void) 217 { 218 writel(0, ICLR); 219 writel(0, ICMR); 220 #if defined(CONFIG_CPU_PXA27X) 221 writel(0, ICLR2); 222 writel(0, ICMR2); 223 #endif 224 } 225 226 void pxa_clock_setup(void) 227 { 228 writel(CONFIG_SYS_CKEN, CKEN); 229 writel(CONFIG_SYS_CCCR, CCCR); 230 asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(0x0b)); 231 232 /* enable the 32Khz oscillator for RTC and PowerManager */ 233 writel(OSCC_OON, OSCC); 234 while (!(readl(OSCC) & OSCC_OOK)) 235 asm volatile("" : : : "memory"); 236 } 237 238 void pxa_wakeup(void) 239 { 240 uint32_t rcsr; 241 242 rcsr = readl(RCSR); 243 writel(rcsr & (RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR), RCSR); 244 245 /* Wakeup */ 246 if (rcsr & RCSR_SMR) { 247 writel(PSSR_PH, PSSR); 248 pxa2xx_dram_init(); 249 icache_disable(); 250 dcache_disable(); 251 asm volatile("mov pc, %0" : : "r"(readl(PSPR))); 252 } 253 } 254 255 int arch_cpu_init(void) 256 { 257 pxa_gpio_setup(); 258 pxa_wakeup(); 259 pxa_interrupt_setup(); 260 pxa_clock_setup(); 261 return 0; 262 } 263 264 void i2c_clk_enable(void) 265 { 266 /* Set the global I2C clock on */ 267 writel(readl(CKEN) | CKEN14_I2C, CKEN); 268 } 269 270 void __attribute__((weak)) reset_cpu(ulong ignored) __attribute__((noreturn)); 271 272 void reset_cpu(ulong ignored) 273 { 274 uint32_t tmp; 275 276 setbits_le32(OWER, OWER_WME); 277 278 tmp = readl(OSCR); 279 tmp += 0x1000; 280 writel(tmp, OSMR3); 281 writel(MDREFR_SLFRSH, MDREFR); 282 283 for (;;) 284 ; 285 } 286 287 void enable_caches(void) 288 { 289 #ifndef CONFIG_SYS_ICACHE_OFF 290 icache_enable(); 291 #endif 292 #ifndef CONFIG_SYS_DCACHE_OFF 293 dcache_enable(); 294 #endif 295 } 296